Never had this happen on a ride before
#1
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,802 Times
in
2,286 Posts
Never had this happen on a ride before
Brooks saddle tension bolt, lost while riding
Riding with Andy_K and friends, stopped to regroup, got back on my bike and heard something bounce through the spokes, figured it was a rock or twig. a bit of riding felt like the saddle was too low, stopped a few miles later and noticed this.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
No fun but at least you are getting out and riding. It's still indoor trainer weather in Iowa.
#3
Senior Member
Join Date: Mar 2008
Location: North Bend, Washington State
Posts: 2,942
Bikes: 1937 Hobbs; 1977 Bruce Gordon; 1987 Bill Holland; 1988 Schwinn Paramount (Fixed gear); 1999 Fat City Yo Eddy (MTB); 2018 Woodrup (Touring) 2016 Ritchey breakaway
Mentioned: 291 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 3,794 Times
in
668 Posts
#4
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Well that sux. How many standing-up miles did you have to endure to finish out the ride?
Spares probably readily available, I'd imagine. I'm sure Rudi's got a million of 'em.
DD
Spares probably readily available, I'd imagine. I'm sure Rudi's got a million of 'em.
DD
Likes For Drillium Dude:
#5
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
Similar, on a British Roadster, on that one the nose of the saddle tore, bolt dropped clear into a storm drain...
So it goes.
one of the saddle makers sells replacement parts.
So it goes.
one of the saddle makers sells replacement parts.
#7
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
#8
Senior Member
Join Date: Jan 2016
Posts: 3,452
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 877 Post(s)
Liked 2,293 Times
in
1,281 Posts
Not good! I guess i need to check my Brooks/ Ideal saddles every once in a while. I honestly have not heard of this. I have heard of them tearing when they get old and dry from lack of conditioning, but not mechanical failure. A first time for everything! Joe
#9
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,715 Times
in
2,613 Posts
Guess it was time to tension that one up.
#10
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,802 Times
in
2,286 Posts
b-b-b-b-b-butt I thought we were never, under any circumstances, to tighten one up?
Turned out fine, ride was over halfway over, and I was near the South Market Cafe, close enough to pedal over standing, so I called up my wife and asked if she wanted to meet me for lunch: Last time you were there:
Matt sez dis is da place for pastries.
Already ordered the replacement bolt
Turned out fine, ride was over halfway over, and I was near the South Market Cafe, close enough to pedal over standing, so I called up my wife and asked if she wanted to meet me for lunch: Last time you were there:
Matt sez dis is da place for pastries.
Already ordered the replacement bolt
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#13
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
Brooks saddle tension bolt, lost while riding
Riding with Andy_K and friends, stopped to regroup, got back on my bike and heard something bounce through the spokes, figured it was a rock or twig. a bit of riding felt like the saddle was too low, stopped a few miles later and noticed this.
#14
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,802 Times
in
2,286 Posts
My fellow riders suggested the same, but my wife came to pick me up and have lunch nearby, didn’t want to interrupt that good mojo. Besides, I knew I have some old saddles at home for spare parts.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#15
Member
Join Date: Jun 2012
Location: Dallas, TX
Posts: 32
Bikes: Mercian Audax Velo Orange Rando. Cannondale R800
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
This just happened to me and I got a 1/4” 3 “ long threaded rod and two 1/4” nuts for about $2 at Lowes. Works so far and will probably start carrying a spare set.
#16
car dodger
Every few rides I push down at the wide part of my brooks, if it gives much at all I will tighten the bolt a little, maybe a quarter turn or so, until the saddle firms up some. I had a brooks swallow that I failed to monitor the bolt, and eventually had the leather replaced due to sagging.
__________________
1989 Schwinn Paramount OS
1980 Mclean/Silk Hope Sport Touring
1983 Bianchi pista
1976 Fuji Feather track
1979 raleigh track
"I've consulted my sources and I'm pretty sure your derailleur does not exist"
1989 Schwinn Paramount OS
1980 Mclean/Silk Hope Sport Touring
1983 Bianchi pista
1976 Fuji Feather track
1979 raleigh track
"I've consulted my sources and I'm pretty sure your derailleur does not exist"
#17
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,099 Times
in
914 Posts
Tough guys don’t need that squishy leather part anyway.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
Likes For Spaghetti Legs:
#18
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Y'all must be listening to The Nazz instead of Archie Bell and the Drells.
You gotta tighten up...
...not loosen up.
You gotta tighten up...
...not loosen up.
#19
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
I think there's 2 primary types or lengths. Rudi filled me in when I lost one a few years back They are available, I bought one in a shop in Toronto.
Love Archie Bell and the Drells. Live instead of synced.
Love Archie Bell and the Drells. Live instead of synced.
Last edited by clubman; 05-07-20 at 02:48 PM.
#20
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Well I guess it's time to take this one to the post office.
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#22
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,715 Times
in
2,613 Posts
I just carry an extra saddle. Got it in here somewhere.
#23
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
Likes For jyl:
#24
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,104
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Liked 372 Times
in
177 Posts
Wow. You have gotten really good at that! The RHM rivets, so cool!
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#25
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,625
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3890 Post(s)
Liked 6,488 Times
in
3,211 Posts
"Great guglie moogly!"