Shimano Parts Source?
#1
Senior Member
Thread Starter
Join Date: Nov 2014
Posts: 98
Bikes: Caylor, Basso, Sannino, Colnago, Masi
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shimano Parts Source?
Is there a particular person or shop that is a good place to start to find older Shimano parts? I need a couple tension screws for the old Look-compatible 6401 and 7401 pedals. The kind that go in the bottom of the pedal.
many thanks for any assist
Charlie
many thanks for any assist
Charlie
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4210 Post(s)
Liked 3,875 Times
in
2,315 Posts
I doubt you'll find that these screws were ever available as a unique stocking item. But as a take off from an already non useable pedal, maybe. Sometimes commercially available screws will interchange with the bike specific one. The screw might need cutting down or have a different head. Have you looked into this? Andy
#3
Banned
Yes , economics of stocking spare small parts , is not a winner.. Campagnolo did some of that 35+ years ago ..
the old shop had a little display cabinet, then.. catalog #17, on customer side, was published in 1975..
...
the old shop had a little display cabinet, then.. catalog #17, on customer side, was published in 1975..
...