28h dynamo wheel strong enough?
#1
Senior Member
Thread Starter
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
28h dynamo wheel strong enough?
After agonizing over which dynamo hub to get for 2 weeks, I finally settled on the SP SV-8. Unfortunately, my retailer only has the 28h version in stock. I was planning on doing a 32h build, but a 32h hub would take 8 weeks to ship.
This would be paired with a DT Swiss R460 rim, and I'd run 32 or 28mm tires on it. The purpose is randonneuring, and some of the roads around here are a little rough. I weigh 170lbs, maybe 175 occasionally.
Will I be okay with 28h, or should I spring for 32? I can find another retailer with the 32h version in stock, but mine is selling 'em for $30 less than other places. (Yes, I'm cheap.)
This would be paired with a DT Swiss R460 rim, and I'd run 32 or 28mm tires on it. The purpose is randonneuring, and some of the roads around here are a little rough. I weigh 170lbs, maybe 175 occasionally.
Will I be okay with 28h, or should I spring for 32? I can find another retailer with the 32h version in stock, but mine is selling 'em for $30 less than other places. (Yes, I'm cheap.)
#2
Banned
your plans or riding style , is unstated..
I have 28 spoke wheels , but they are 406 20" (2 on my bike trailer )
and a 16" on my Brompton.. (I have the original & one made around a Schmidt New XS dynamo hub..
8 weeks? you ordering from Asia? bring as you say, cheap ,
that the case why not just get a shimano dynamo hub wheel off the peg
with a rim of modest cost like Sun CR18?
good luck..
...
...
I have 28 spoke wheels , but they are 406 20" (2 on my bike trailer )
and a 16" on my Brompton.. (I have the original & one made around a Schmidt New XS dynamo hub..
8 weeks? you ordering from Asia? bring as you say, cheap ,
that the case why not just get a shimano dynamo hub wheel off the peg
with a rim of modest cost like Sun CR18?
good luck..
...
...
Last edited by fietsbob; 05-14-19 at 01:09 PM.
#3
Senior Member
Thread Starter
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
700c wheel to be used for brevets. I don’t know about my “style,” but I’d prefer something reasonably durable. I’ve never broken a spoke or anything, but then again, I’ve never had a 28 spoke wheel.
I can get the R460s for about $10 more than the CR18, and it seems to be better in just about every way. (This coming from someone with two sets of CR18s.)
I can get the R460s for about $10 more than the CR18, and it seems to be better in just about every way. (This coming from someone with two sets of CR18s.)
#4
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
IDC sells 24h 700C wheelsets with that hub: https://www.intelligentdesigncycles....speed-wheelset
As Bob mentions, how you ride will determine whether that's enough spokes. I built my dyno wheel with the 32h version and wouldn't blame you if you held out for the same.
As Bob mentions, how you ride will determine whether that's enough spokes. I built my dyno wheel with the 32h version and wouldn't blame you if you held out for the same.
#5
Senior Member
Join Date: Dec 2007
Location: San Jose, California
Posts: 3,504
Bikes: 2001 Tommasini Sintesi w/ Campagnolo Daytona 10 Speed
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Likes: 0
Liked 35 Times
in
30 Posts
After agonizing over which dynamo hub to get for 2 weeks, I finally settled on the SP SV-8. Unfortunately, my retailer only has the 28h version in stock. I was planning on doing a 32h build, but a 32h hub would take 8 weeks to ship.
This would be paired with a DT Swiss R460 rim, and I'd run 32 or 28mm tires on it. The purpose is randonneuring, and some of the roads around here are a little rough. I weigh 170lbs, maybe 175 occasionally.
Will I be okay with 28h, or should I spring for 32? I can find another retailer with the 32h version in stock, but mine is selling 'em for $30 less than other places. (Yes, I'm cheap.)
This would be paired with a DT Swiss R460 rim, and I'd run 32 or 28mm tires on it. The purpose is randonneuring, and some of the roads around here are a little rough. I weigh 170lbs, maybe 175 occasionally.
Will I be okay with 28h, or should I spring for 32? I can find another retailer with the 32h version in stock, but mine is selling 'em for $30 less than other places. (Yes, I'm cheap.)
=8-)
__________________
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
#6
Banned
My CR 18 is rolled down to 406 20"...
boxing the bike to fly to Paris, for P-B-P, shipping & handling , may be the most stress..
boxing the bike to fly to Paris, for P-B-P, shipping & handling , may be the most stress..
#7
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,904
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,933 Times
in
1,213 Posts
After the first couple years' riding, the extra $30 cost for a 32 spoke wheel won't matter any more.
#8
Senior Member
When randonneuring there is usually no support like being on a tour. I would go for the higher spoke count even thinking about 36 double butted spokes.
#9
Senior Member
Thread Starter
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
Good point. Luckily I just found a 32h hub someplace else for only $10 more than the original place. So I went for it--better safe than stranded with a taco'd rim two hundred miles from my destination (or fearing something along those lines).
#10
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,957
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 986 Post(s)
Liked 880 Times
in
527 Posts
The SV-8 hub is designed for smaller wheels (400-536), which spin faster at a given speed. Power output will be reduced slightly if used on a larger diameter wheel. This may not be significant, but if you also plan to power your phone or other devices it may be iffy. The PV-8 is recommended for the larger wheels.
#11
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
I just installed a 700c wheel I built with a PV-8 hub. There's still a bit of flickering until the speed gets up to 7 or 8 miles per hour. I have a 406 wheel with an SV-8 on my folder, which works well with that size wheel.
#12
Senior Member
Thread Starter
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
I’m just using it for a front light, no rear, no charging. Not too worried about power output.
#13
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
That was my rationale for using an SV-8. It's not a bike I have to ride at super-low speeds, so it works out.
Thread
Thread Starter
Forum
Replies
Last Post
smurf hunter
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
38
02-13-12 09:42 AM