ISO: Crank Bolt "Washer" Single or Pair
09-15-20, 09:09 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
ISO: Crank Bolt "Washer" Single or Pair
looking for a single crank bolt washer. or a pair if can't be separated like the cat siblings at ASPC.
brand don't matter. mine's Campy (i know Sugino washers are slightly thicker), but no one's gonna check both side of the crank to see if matching.
for those with loose screw bins, it's like one in the pic.
outside diameter is 20.x mm, inside is 12.x mm
brand don't matter. mine's Campy (i know Sugino washers are slightly thicker), but no one's gonna check both side of the crank to see if matching.
for those with loose screw bins, it's like one in the pic.
outside diameter is 20.x mm, inside is 12.x mm
09-15-20, 09:24 PM
#2
Senior Member
looking for a single crank bolt washer. or a pair if can't be separated like the cat siblings at ASPC.
brand don't matter. mine's Campy (i know Sugino washers are slightly thicker), but no one's gonna check both side of the crank to see if matching.
for those with loose screw bins, it's like one in the pic.
outside diameter is 20.x mm, inside is 12.x mm
brand don't matter. mine's Campy (i know Sugino washers are slightly thicker), but no one's gonna check both side of the crank to see if matching.
for those with loose screw bins, it's like one in the pic.
outside diameter is 20.x mm, inside is 12.x mm
PM your address and I'll send you a couple.
Likes For brian3069:
09-15-20, 10:00 PM
#3
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
search is over, POST CLOSED. thanks!
