Can a 7 Spd Cassette go 6 Spd Bike???
#1
Senior Member
Thread Starter
Join Date: Mar 2019
Posts: 81
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 58 Post(s)
Liked 0 Times
in
0 Posts
Can a 7 Spd Cassette go 6 Spd Bike???
My parts bike has the new 7 spd shifter on it, and my current riding bike has the 6 spd cassette and frame.
So what happens when people put their 7 spd wheel and cassette into the 6 spd frame? I could squeeze it in there, but I'm leery that things will wobble out of their fixed stations. This bike takes MTB abuses and usage, so...
So what happens when people put their 7 spd wheel and cassette into the 6 spd frame? I could squeeze it in there, but I'm leery that things will wobble out of their fixed stations. This bike takes MTB abuses and usage, so...
#2
Hack
Join Date: Sep 2015
Location: Ottawa, Ontario, Canada
Posts: 1,271
Bikes: TrueNorth CX bike, 88 Bianchi Strada (currently Sturmey'd), Yess World Cup race BMX, Pure Cruiser race BMX, RSD Mayor v3 Fatbike
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 196 Times
in
134 Posts
It depends......
Frame may be built for a narrower OLD (wider hub) for the 6 speed, or it may not. Unlike 8-9-10 speed, which are all the same width cassette with narrower gears, 7 speed is very close to the same spacing and wider.
I guess I should specify that I am assuming Shimano components.
If the OLD (outside locknut distance, the distance between the dropouts with the wheel installed) is the same, you should be able to swap to 7 speed very easily.
MTA: The 6 speed is probably a freewheel, not a cassette (threaded interface vs. splined), the 7 speed could be either but likely a freewheel as well.
Frame may be built for a narrower OLD (wider hub) for the 6 speed, or it may not. Unlike 8-9-10 speed, which are all the same width cassette with narrower gears, 7 speed is very close to the same spacing and wider.
I guess I should specify that I am assuming Shimano components.
If the OLD (outside locknut distance, the distance between the dropouts with the wheel installed) is the same, you should be able to swap to 7 speed very easily.
MTA: The 6 speed is probably a freewheel, not a cassette (threaded interface vs. splined), the 7 speed could be either but likely a freewheel as well.
#3
Sr Member on Sr bikes
Also just pointing out that shifting might be FUBAR....indexing will probably be off. You might want to change rear shifter to the friction option.
Dan
Dan
#4
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
So, 6-speed Uniglide freehub? Have you removed the lockring and looked at the freehub body? Bolt-on or press fit. These are important things...
If bolt-on type, you can replace the freehub body with a modern Hyperglide replacement. Then, you're good. If press-on type, then you must modify the Hyperglide cog inner tabs to fit over the freehub body.
https://www.sheldonbrown.com/k7.html
^This page should help you.
If bolt-on type, you can replace the freehub body with a modern Hyperglide replacement. Then, you're good. If press-on type, then you must modify the Hyperglide cog inner tabs to fit over the freehub body.
https://www.sheldonbrown.com/k7.html
^This page should help you.
Last edited by Phil_gretz; 05-01-19 at 08:22 AM. Reason: Added link
#5
100% Certified Beast
Join Date: Nov 2010
Location: Arctic (Near Russia)
Posts: 321
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
you need to identify if you have cassette or freehub first (watch park tools cassette type video on youtube) then go from there.
#6
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,685
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 3721 Post(s)
Liked 5,587 Times
in
2,828 Posts
ooooo, together forever! ^
Likes For shelbyfv:
#7
Senior Member
This guy just joined and is posting thread after thread about really strange stuff. A good chain is $25 and will last a while, who asks about a "cheap" chain? Was a six speed cassette ever even made, I thought it was all freewheels back then? What are we talking here anyway, a 35 year old bike? Where exactly does one procure a "new 7 speed shifter"?
Please stop spamming the board.
Please stop spamming the board.
Likes For Hiro11:
#8
Cycleway town
New 5,6,7 speed shifters are widely available, as are the cassettes and freewheels. They're almost all compatible as the ratio is common. They also fit almost all bike frames.
To swap an old 6sp set up for a new 7sp set up, simply remove the cassette/freewheel and shifter, and fit brand new ones. Each cost from less than a tenner.
Tip - use 8-speed. It's the sweet-spot of set-ups imo.
To swap an old 6sp set up for a new 7sp set up, simply remove the cassette/freewheel and shifter, and fit brand new ones. Each cost from less than a tenner.
Tip - use 8-speed. It's the sweet-spot of set-ups imo.