Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Show Us Your 650B Conversions

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Show Us Your 650B Conversions

Old 05-26-07, 11:14 PM
  #1  
smurfy
Senior Member
Thread Starter
 
smurfy's Avatar
 
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258

Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times in 32 Posts
Show Us Your 650B Conversions

Any 650B enthusiasts out there?

With the cult popularity of the Rivendell Saluki/Glorius and the old French 650B wheel size promoted by Grant Peterson there has been a tiny movement to covert some older road bikes to this wheel size. The obvious advantages are the fitting of a fatter tire for a more comfortable ride and a more useful bike for commuting and touring (and arguably better looks). More info and pics of some cool conversions available here at https://www.freewebs.com/650b.

650B rocks! However I have doubts that this thread will be very popular.

Here are my pics of my '88 Schwinn Le Tour 650B that is also a three-speed conversion:
Attached Images
File Type: jpg
php1OXHGhPM.jpg (56.3 KB, 4444 views)
File Type: jpg
phpCz3PZCPM.jpg (65.9 KB, 4338 views)
File Type: jpg
phpoUp5DTPM.jpg (76.1 KB, 4163 views)
File Type: jpg
php4mrBFRPM.jpg (66.1 KB, 4003 views)
File Type: jpg
phpNzAJTgPM.jpg (86.5 KB, 4004 views)
File Type: jpg
phpODtAWhPM.jpg (64.9 KB, 4027 views)
File Type: jpg
phpuawZNcPM.jpg (61.7 KB, 3888 views)
File Type: jpg
phpWrSLRKPM.jpg (90.6 KB, 3877 views)
smurfy is offline  
Likes For smurfy:
Old 05-27-07, 05:51 AM
  #2  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times in 2,580 Posts
Very nice! I converted a Raleigh Competition GS though it's currently back to original spec and the parts will go on a new 650B frameset once I get around to buying it (a Kogswell P/R). I really like the ride with these wheels--quick and comfortable.

Neal
Attached Images
File Type: jpg
CompetitionGS1.jpg (99.9 KB, 4282 views)
File Type: jpg
CompetitionGS2.jpg (99.8 KB, 4004 views)
File Type: jpg
CompetitionGS8.jpg (99.2 KB, 3949 views)
nlerner is offline  
Old 05-27-07, 05:55 AM
  #3  
Freud
Senior Member
 
Join Date: May 2007
Location: Oregon
Posts: 119
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by nlerner
Very nice! I converted a Raleigh Competition GS though it's currently back to original spec and the parts will go on a new 650B frameset once I get around to buying it (a Kogswell P/R). I really like the ride with these wheels--quick and comfortable.

Neal

Could you tell me where I can get fenders like the one pictured on your bike? I have tried searching but must be looking in the wrong places.

Thanks
Freud is offline  
Old 05-27-07, 08:18 AM
  #4  
dbarnblatt@usa.
Senior Member
 
Join Date: Sep 2006
Posts: 264
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I have a plan to do a 650b conversion... I just need to find the right frame. Also I would love to find a set of vintage rims (or wheels) for the project. The vintage stuff is just so hard to get in the states. Velo orange sells a new set of rims for around $150... perfect for a daily rider and to see what frames might work for a conversion.

Brakes are another issue... I want to use centerpulls and I think MAFAC will work, but that depends on the frame also.

The OP's conversion looks great... it seems the bike was made for it!
dbarnblatt@usa. is offline  
Old 05-27-07, 08:28 AM
  #5  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times in 2,580 Posts
Originally Posted by Freud
Could you tell me where I can get fenders like the one pictured on your bike? I have tried searching but must be looking in the wrong places.

Thanks
Those are Bluemels no-weight alloy mudguards that were originally on a 1949 Raleigh Clubman. I think you need a time machine to find them though I have seen Hilary Stone sell a pair on eBay in the last year or so.

Neal
nlerner is offline  
Old 05-27-07, 09:03 AM
  #6  
Noah Scape
can't member
 
Noah Scape's Avatar
 
Join Date: Jan 2005
Location: Iowa City
Posts: 1,742
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times in 6 Posts
I found this Nishiki Prestige on the curb last spring. I had a set of 650B wheels that were from an 80s Schwinn MTB. I set it up for my 10 year old daughter.

Last edited by Noah Scape; 12-08-15 at 02:51 PM.
Noah Scape is offline  
Old 05-27-07, 02:05 PM
  #7  
smurfy
Senior Member
Thread Starter
 
smurfy's Avatar
 
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258

Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times in 32 Posts
Originally Posted by Noah Scape
I found this Nishiki Prestige on the curb last spring. I had a set of 650B wheels that were from an 80s Schwinn MTB. I set it up for my 10 year old daughter.
Nice fenders (yeah, I'm bumping this up. Preaching the 650B gospel, can't help myself!).

Speaking of fenders, if you haven't noticed, 650B seems to be meant for them.

They just go together, like a beautiful woman and a little black dress! (sigh)
smurfy is offline  
Old 05-27-07, 03:39 PM
  #8  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Smurfy, I like it! Great idea and wonderful creativity. It's sort of a more modern version of the '60s Schwinn Traveler. Modern timeless with a twist. Just one question: Did this version of Le Tour have 700c wheels originally? Brake reach seemed to be no problem.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Old 05-27-07, 07:02 PM
  #9  
smurfy
Senior Member
Thread Starter
 
smurfy's Avatar
 
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258

Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times in 32 Posts
Originally Posted by pastorbobnlnh
Smurfy, I like it! Great idea and wonderful creativity. It's sort of a more modern version of the '60s Schwinn Traveler. Modern timeless with a twist. Just one question: Did this version of Le Tour have 700c wheels originally? Brake reach seemed to be no problem.
Thanks, pastorbob!

Yes I think it did originally have 700c wheels although I got this as a frame/fork only in a trade. The brakes are not original. They are the old Aultenburger dual-pivot calipers.

Last edited by smurfy; 05-27-07 at 07:11 PM.
smurfy is offline  
Old 05-28-07, 02:54 AM
  #10  
Pompiere
Senior Member
 
Pompiere's Avatar
 
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,425

Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 943 Times in 495 Posts
So, why 650B instead of the slightly more common 650A, otherwise known as 26x1 3/8? There is only a few mm difference and in the pictures, they look the same.
Pompiere is offline  
Old 05-28-07, 08:22 AM
  #11  
smurfy
Senior Member
Thread Starter
 
smurfy's Avatar
 
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258

Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times in 32 Posts
Originally Posted by Pompiere
So, why 650B instead of the slightly more common 650A, otherwise known as 26x1 3/8? There is only a few mm difference and in the pictures, they look the same.
That's a good question and I'll try to answer that although I'm no expert on the subject.

650B was the tire of choice for the fine and expensive hand-built French "constructeur" (spelling) touring cycles of the '40s and '50s such as the Alex Singer and Rene Herse. This was the golden age of European touring and raundoneuring. Also this was the days of the so-called post-war technical trials which the constructeurs built and showed off thier finest bicycles, racks, lights, etc. This was at the time when gasoline in Europe was scarce and before the automobile became popular among the masses. Today millions of utility bikes in Europe and Japan still use 650B but that size has never been popular in North America so it is new to many of us Americans. 650B tires traditionally have been fatter for a smoother ride over rough post-war European roads.

650A (26 x 1 3/8) is I believe a British invention and mainly used of course on the millions of English 3-speeds and in North America on cheap 10-speeds of the '70's and other assorted kids bikes. Usually the only tires available were cheap black and gumwall tires in 1 3/8 or 1 3/4 (?) found in K-mart or whatever.

Within the past couple of years quality rims and tires have now become available for both 650B and 650A. Millions of 3-speed bikes are still in service and some people have been wanting to update and upgrade these bikes for sentimental value, to make them more ridable, etc. Utility and practical commuting bikes are becoming more popular now so I hope both wheel sizes take off. 650A is cool, too.

Hope that helps. I wish a real expert like Jan Heine of Vintage Bicycle Quarterly can chime in here.
smurfy is offline  
Old 05-28-07, 08:29 AM
  #12  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times in 2,580 Posts
I agree that tire availability in the US is a key difference between 650A and 650B. It seems that in Japan, the major manufacturers are offering plenty of 650A goodness, they're very hard to find here. There's not exactly a bonanza of 650B offerings, but you have some choice as to width (from 32mm to 50mm), casing, tread, psi.

Neal
nlerner is offline  
Old 05-28-07, 04:11 PM
  #13  
Kogswell
Matthew Grimm / Flunky
 
Kogswell's Avatar
 
Join Date: Jan 2005
Posts: 656
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Pompiere
So, why 650B instead of the slightly more common 650A, otherwise known as 26x1 3/8?
The same reason that Schwinn decided to use 597 (S-6) instead of 590 (650A).

tires = money

It's S-6 all over again.

For the record, Kogswell is pro 650A.
Kogswell is offline  
Old 05-28-07, 08:38 PM
  #14  
Bikedued
Senior Member
 
Bikedued's Avatar
 
Join Date: Jul 2004
Posts: 11,070
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 205 Post(s)
Liked 107 Times in 60 Posts
That Schwinn literally looks like it rolled off the assembly line that way! Very nice conversion. Not my personal choice of bars, but it's a beautiful bike!! Nicely done!,,,,BD
__________________
So many bikes, so little dime.
Bikedued is offline  
Old 05-28-07, 08:48 PM
  #15  
Bikedued
Senior Member
 
Bikedued's Avatar
 
Join Date: Jul 2004
Posts: 11,070
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 205 Post(s)
Liked 107 Times in 60 Posts
Originally Posted by pastorbobnlnh
Smurfy, I like it! Great idea and wonderful creativity. It's sort of a more modern version of the '60s Schwinn Traveler. Modern timeless with a twist. Just one question: Did this version of Le Tour have 700c wheels originally? Brake reach seemed to be no problem.
I bought a frame and fork 86 or 87 Le Tour that had the brakes still on it. I tried slipping a 700 wheel into the front forks, and the Sante brakes wouldn't reach, not even at the bottom of the slot. A 27" wheel lined right up, however. Oddly enough I put the same brakes on my Prelude, and it fit a 700 wheel with hardly any adjustment. I guess the 700/27 switch happened while the same decals were being used? Either that, or Schwinn made different sized frames/forks for the separate models?,,,,BD
__________________
So many bikes, so little dime.
Bikedued is offline  
Old 05-28-07, 09:00 PM
  #16  
smurfy
Senior Member
Thread Starter
 
smurfy's Avatar
 
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258

Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times in 32 Posts
Originally Posted by Bikedued
That Schwinn literally looks like it rolled off the assembly line that way! Very nice conversion. Not my personal choice of bars, but it's a beautiful bike!! Nicely done!,,,,BD
Thanks! Admittedly the handlebars are from a cannibalized Adams Trail-A-Bike and are a little cramped. I was just anxious to get the bike together and they were available. I am going to buy a more suitable handlebar for it eventually, something wider and maybe a slightly higher reach.

I should add that I painted the fenders, stem and brake lever bodies at work with a spray gun (I'm an industrial spray painter by trade) and I mixed the color to match the frame using a couple of different blues. It's not a perfect match but close enough! Fenders are off a junk '67 C-Itoh (I think) women's frame 3-speed.

Last edited by smurfy; 05-28-07 at 09:12 PM.
smurfy is offline  
Old 08-21-07, 09:53 PM
  #17  
NormanF
Senior Member
 
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times in 8 Posts
Originally Posted by smurfy
Any 650B enthusiasts out there?

With the cult popularity of the Rivendell Saluki/Glorius and the old French 650B wheel size promoted by Grant Peterson there has been a tiny movement to covert some older road bikes to this wheel size. The obvious advantages are the fitting of a fatter tire for a more comfortable ride and a more useful bike for commuting and touring (and arguably better looks). More info and pics of some cool conversions available here at https://www.freewebs.com/650b.

650B rocks! However I have doubts that this thread will be very popular.

Here are my pics of my '88 Schwinn Le Tour 650B that is also a three-speed conversion:
My 650B conversion of a Peugeot PX 10! I posted a thread about this on this forum! For what's worth, the bike rides like a dream.
Attached Images
File Type: jpg
Peugeot PX 50.jpg (16.7 KB, 4334 views)
NormanF is offline  
Likes For NormanF:
Old 08-21-07, 09:58 PM
  #18  
Bikedued
Senior Member
 
Bikedued's Avatar
 
Join Date: Jul 2004
Posts: 11,070
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 205 Post(s)
Liked 107 Times in 60 Posts
So what exactly is 650B size. Is it like the old 1 3/8's size? Somewhere between 26" MTB and 27".,,,,,BD
__________________
So many bikes, so little dime.
Bikedued is offline  
Old 08-21-07, 10:04 PM
  #19  
NormanF
Senior Member
 
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times in 8 Posts
Originally Posted by Bikedued
So what exactly is 650B size. Is it like the old 1 3/8's size? Somewhere between 26" MTB and 27".,,,,,BD
Its an old French size between a 700C road bike size and a 559mm 26" mountain bike size. The common vernacular would be 26 1/2. The metric designation is 584mm.
NormanF is offline  
Old 08-22-07, 02:04 AM
  #20  
le brad
Senior Member
 
Join Date: Dec 2006
Location: portland, or
Posts: 288
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Would there be any noticeable difference in the way that 650a vs. 650b rides?
le brad is offline  
Old 08-22-07, 04:00 AM
  #21  
NormanF
Senior Member
 
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times in 8 Posts
Originally Posted by le brad
Would there be any noticeable difference in the way that 650a vs. 650b rides?
650A - the old 590mm size used on old Raleigh 3 speeds? I would think the ride quality wouldn't be noticeably different from a 650B but in practice the selection of rims and tires for the former size is pretty scanty these days.
NormanF is offline  
Old 09-09-07, 06:49 PM
  #22  
Sigurdd50
Papa Wheelie
 
Sigurdd50's Avatar
 
Join Date: Feb 2005
Location: Madison, Wi
Posts: 1,472

Bikes: Jamis Aurora '02; Takara Medalist (650B)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
650A - the old 590mm size used on old Raleigh 3 speeds?
yes this begs the questions....

I'm hot to try one of these conversions... as soon as I determine if the frame (old Dawes Galaxy) is suitable, or I find another possibility.
The 650B is by reports, 588, right?
Well, wouldn't that 590 be about useable? Or does that number represent something else?
Would a 650B tire fit over a 590 rim?
(there seem to be a few 590's in the volunteer shop I work in... tho they may be old clunker steel ones?)
Sigurdd50 is offline  
Old 09-09-07, 07:10 PM
  #23  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times in 2,580 Posts
650B is 584 ERD rather than 590/650A. Most 590 tires are built to pretty tight tolerance and will be too big for 650B rims. But for that matter the range of tire choices in 650B right now is much better than 650A unless you live in Japan.

Neal
nlerner is offline  
Old 09-09-07, 08:11 PM
  #24  
Lamplight
Senior Member
 
Lamplight's Avatar
 
Join Date: Oct 2005
Location: Bellingham, WA
Posts: 2,769
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 13 Times in 12 Posts
I have not tried this myself, but I did change my Nishiki from 27" wheels to 700c which allowed for fenders and 32mm tires. Well worth it!
Lamplight is offline  
Old 09-09-07, 08:29 PM
  #25  
Sigurdd50
Papa Wheelie
 
Sigurdd50's Avatar
 
Join Date: Feb 2005
Location: Madison, Wi
Posts: 1,472

Bikes: Jamis Aurora '02; Takara Medalist (650B)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
ah there is a good bit of diff between 584 and 590... my mistake.

now the trick is to find a decent frame/bike to work a conversion with.
My quandry?

To decide what the purpose the bike will hold... an internal geared (3 speed?) for commuting year round, or a real mule (derailleured) for hauling... so many choices.
Sigurdd50 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.