Criterium bend bars
#1
Senior Member
Thread Starter
Criterium bend bars
Wow. 40 years later. Finally I get a bike with criterium bend bars. What a revelation. I get it.
Just over 40 years ago I bought a Motobecane LeChampion. On this bike I would delve into racing. I would take on the likes of Greg Lemond, Ron Kefal, Mark Gorski and a who's who of american cycling greats.
The bike was equipped with TTT bar and stem, Giro d'Italia bend perhaps. From my first race on I noted how my forearms just above my wrist were always bruised after a race. The constant pulling on the bars, sprinting from corner to corner, round and round a closed circuit course, while in the drops and my forearms making contact with the tops of the bars.
I was always fascinated by the Cinelli criterium bend. Like a track bend, they seemed racy and sleek. But in the 70's you took what you could get. Choices were few. Bars were narrow. And at 16 years of age, part time job, I spent my money on tires.
So, yesterday, out for a ride on my recently acquired Bates BAR with GB criterium bend bars, I grab the bars in the drops and charge out of the saddle for a few pedal strokes. My forearms are free from touching the tops of the bars. I get it!!!! The criterium bend liberates your arms while sprinting. Oh how I wish I had these bars 40 yrs ago.
Just over 40 years ago I bought a Motobecane LeChampion. On this bike I would delve into racing. I would take on the likes of Greg Lemond, Ron Kefal, Mark Gorski and a who's who of american cycling greats.
The bike was equipped with TTT bar and stem, Giro d'Italia bend perhaps. From my first race on I noted how my forearms just above my wrist were always bruised after a race. The constant pulling on the bars, sprinting from corner to corner, round and round a closed circuit course, while in the drops and my forearms making contact with the tops of the bars.
I was always fascinated by the Cinelli criterium bend. Like a track bend, they seemed racy and sleek. But in the 70's you took what you could get. Choices were few. Bars were narrow. And at 16 years of age, part time job, I spent my money on tires.
So, yesterday, out for a ride on my recently acquired Bates BAR with GB criterium bend bars, I grab the bars in the drops and charge out of the saddle for a few pedal strokes. My forearms are free from touching the tops of the bars. I get it!!!! The criterium bend liberates your arms while sprinting. Oh how I wish I had these bars 40 yrs ago.
#2
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
#3
Pedalin' Erry Day
Oh! That little tidbit about handlebar design just clicked for me after reading your post, now you have me thinking about whether or not I should switch a few cockpits around...
#4
Senior Member
Join Date: May 2005
Location: Los Angeles
Posts: 909
Bikes: Casati, Look, Torelli, Ridley, and a bunch of steel bikes from the 80s and the 90s..
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Wow. 40 years later. Finally I get a bike with criterium bend bars. What a revelation. I get it.
Just over 40 years ago I bought a Motobecane LeChampion. On this bike I would delve into racing. I would take on the likes of Greg Lemond, Ron Kefal, Mark Gorski and a who's who of american cycling greats.
The bike was equipped with TTT bar and stem, Giro d'Italia bend perhaps. From my first race on I noted how my forearms just above my wrist were always bruised after a race. The constant pulling on the bars, sprinting from corner to corner, round and round a closed circuit course, while in the drops and my forearms making contact with the tops of the bars.
I was always fascinated by the Cinelli criterium bend. Like a track bend, they seemed racy and sleek. But in the 70's you took what you could get. Choices were few. Bars were narrow. And at 16 years of age, part time job, I spent my money on tires.
So, yesterday, out for a ride on my recently acquired Bates BAR with GB criterium bend bars, I grab the bars in the drops and charge out of the saddle for a few pedal strokes. My forearms are free from touching the tops of the bars. I get it!!!! The criterium bend liberates your arms while sprinting. Oh how I wish I had these bars 40 yrs ago.
Just over 40 years ago I bought a Motobecane LeChampion. On this bike I would delve into racing. I would take on the likes of Greg Lemond, Ron Kefal, Mark Gorski and a who's who of american cycling greats.
The bike was equipped with TTT bar and stem, Giro d'Italia bend perhaps. From my first race on I noted how my forearms just above my wrist were always bruised after a race. The constant pulling on the bars, sprinting from corner to corner, round and round a closed circuit course, while in the drops and my forearms making contact with the tops of the bars.
I was always fascinated by the Cinelli criterium bend. Like a track bend, they seemed racy and sleek. But in the 70's you took what you could get. Choices were few. Bars were narrow. And at 16 years of age, part time job, I spent my money on tires.
So, yesterday, out for a ride on my recently acquired Bates BAR with GB criterium bend bars, I grab the bars in the drops and charge out of the saddle for a few pedal strokes. My forearms are free from touching the tops of the bars. I get it!!!! The criterium bend liberates your arms while sprinting. Oh how I wish I had these bars 40 yrs ago.
Today's American cyclist are just missing something where I can't exactly put my finger on it. I suppose it was the wild west back then. Those were my true American hero. I went out for a really, really hard 40 mile ride killing my friend my friend after seeing Davis Phinny wining on TV for the first time. It was a race back east with a bunch of Europeans riding it also. This was 1982 or 3? Oh boy Was I excited. I am still excited thinking about it today. Oh yeah, Keifel and then we have Rogers who come to our training rides often and rip our legs off each and every time. Good times.
#5
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,752 Times
in
939 Posts
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".