Suggestions for a new saddle?
#1
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 543
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 272 Times
in
105 Posts
Suggestions for a new saddle?
Now that warmer weather is here, and I’m in a new city with longer bike trails, I’m putting more miles on my bike. It’s mostly weekends now that I work a desk job M-F.
I used to ride a little every day, but I don’t think that’s gonna happen now. This weekend I logged more miles than usual and those 2 little spots under my sitbones feel sore, bruised.
I’m on the stock Jamis saddle which is pretty narrow. I’m thinking I might try something wider, maybe a Brooks B17 or Selle Anatomica. I’m wondering if only riding weekends is gonna take too long to break in the Brooks? Any thoughts or other suggestions?
Thanks!
Oh yeah, I ride a steel frame road bike, on paved trails. I ride on the hoods a lot, not so much on the drops.
I used to ride a little every day, but I don’t think that’s gonna happen now. This weekend I logged more miles than usual and those 2 little spots under my sitbones feel sore, bruised.
I’m on the stock Jamis saddle which is pretty narrow. I’m thinking I might try something wider, maybe a Brooks B17 or Selle Anatomica. I’m wondering if only riding weekends is gonna take too long to break in the Brooks? Any thoughts or other suggestions?
Thanks!
Oh yeah, I ride a steel frame road bike, on paved trails. I ride on the hoods a lot, not so much on the drops.
#2
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,390
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,121 Times
in
744 Posts
I like the old school Selle Italia Turbo saddle for almost everything ---- the rounded profile is nice compared to the angular shells on a lot of modern saddles --- But that said, I also tried a Specialized Power saddle on one of my road bikes on the advise of my LBS's staff --- its great - If I had the budget, id have several of these
But saddle choice being highly individual, id try to visit a Specialized dealer if any are in your area and see if you can demo a saddle or two
But saddle choice being highly individual, id try to visit a Specialized dealer if any are in your area and see if you can demo a saddle or two
Likes For DMC707:
#3
WALSTIB
I was at Brooks B-17 fan for years but I tried to selle anatomica I like it a lot better. A little softer and springer. I just got the r2 rubberized version going to try it too. But as it is with saddles your results may vary
Likes For hillyman:
#4
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,406
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
My experience with the B17 is that a generous initial application of Obenauf's leather preservative, top and bottom (after using all the proofide on there) softens a Brooks saddle nicely.
That said, don't count out your old saddle unless you're noticing more troubling symptoms of poor fit. I get the bruised feeling on a B17 after longer rides too.
That said, don't count out your old saddle unless you're noticing more troubling symptoms of poor fit. I get the bruised feeling on a B17 after longer rides too.
Likes For Unca_Sam:
#5
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 543
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 272 Times
in
105 Posts
Thanks guys I’ll keep that all in mind. It may just be that I’ve been sitting at a desk all winter.
#6
Newbie
As already said, saddles are very personal. I am personally really liking my Terry Liberator. Good price and works well for my riding.
Likes For BillinPA:
#7
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 543
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 272 Times
in
105 Posts
I’ll check out the local shops this week and see if any them do saddle fitting or have an exchange program.
#8
Senior Member
Join Date: Feb 2018
Posts: 1,410
Bikes: 2017 Specialized Allez Sprint Comp
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 850 Post(s)
Liked 344 Times
in
247 Posts
Don’t have much to add besides *not* the specialized power. It’s a favorite amongst racers but it’s probably not a good fit based on your requirements. If you walk into a bike shop and just say “give me a good saddle” they might suggest that.
Likes For smashndash:
#9
Senior Member
Join Date: Nov 2017
Location: Seattle
Posts: 1,949
Bikes: Specialized Roubaix, Canyon Inflite AL SLX, Ibis Ripley AF, Priority Continuum Onyx, Santana Vision, Kent Dual-Drive Tandem
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 871 Post(s)
Liked 725 Times
in
436 Posts
I tried to talk some people out of buying the Power when they say they have a more upright riding position, but others have said it works for them even when not racing. I suppose the flatter profile is more pleasing to some tushes.
OP: some things you can do for free before spending money on a new saddle is to make sure you are giving your butt periodic breaks. Stand up and pedal for 10-60 seconds every 10-20 minutes. Get off the bike and stretch or walk around. Your sit bones may grow accustomed to the load after a few rides also. It's normal to feel a bit of pain when you first start riding longer. If you're already doing those things, then a new saddle may be just the ticket to comfort.
OP: some things you can do for free before spending money on a new saddle is to make sure you are giving your butt periodic breaks. Stand up and pedal for 10-60 seconds every 10-20 minutes. Get off the bike and stretch or walk around. Your sit bones may grow accustomed to the load after a few rides also. It's normal to feel a bit of pain when you first start riding longer. If you're already doing those things, then a new saddle may be just the ticket to comfort.
Likes For surak:
Likes For Gconan:
#11
Senior Member
I like the Fizik Arione but it's an expensive saddle. When mine broke and I decided I couldn't afford to replace it a friend suggested Fabric. They make their saddles in a differing widths and profiles (flat, shallow and radius) to suit different riding styles. They also do four different rails on them. I went for a Line Elite Shallow and I've found it to be very good. So I got a Scoop Elite Shallow for the other bike - also good but I think I prefer the Line.
My bike came with a bottom end Selle San Marco saddle and it has to be the worst saddle I've ever sat upon.
My bike came with a bottom end Selle San Marco saddle and it has to be the worst saddle I've ever sat upon.
Likes For jgwilliams:
#12
Senior Member
Join Date: Jul 2004
Location: Twin Cities
Posts: 928
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 102 Times
in
46 Posts
I went through a number of saddles in the search for the one that worked best for me. The B17 was one of the best, and I’ll be putting one on a Raleigh International I’m building up. But the saddle that has become my “go-to” is the WTB Pure V. I use that on three of my bikes.
__________________
Some days, it's not even worth gnawing through the restraints.
Some days, it's not even worth gnawing through the restraints.
Likes For ddeand:
#13
Newbie
Been riding a Sella Anatomica H2 on my road bike since last spring and it is the most comfortable saddle I've ridden. Just got an R2 for my gravel bike. Rode it yesterday for the first time and it feels pretty good though not as good as my H2. It may need a little more time to break in.
Likes For Drago1010:
#14
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,390
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,121 Times
in
744 Posts
i ride predominately on the hoods and with my back at an approximate 45 degree angle--- classic rando type position- and the power works well for me there --- but it should be noted that i have a clydesdale physique and body type and size can also play into what saddle makes a person happy
Likes For DMC707:
Likes For LorenMiranda:
#16
WALSTIB
Been riding a Sella Anatomica H2 on my road bike since last spring and it is the most comfortable saddle I've ridden. Just got an R2 for my gravel bike. Rode it yesterday for the first time and it feels pretty good though not as good as my H2. It may need a little more time to break in.
Likes For hillyman:
Likes For gorillimo:
#18
Senior Member
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,213
Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 576 Post(s)
Liked 993 Times
in
485 Posts
Many already mentioned, but for saddles, these are my picks:
Brooks
Special Ed Body Geometry
Terry
WTB
Charge Spoon for cheap backup
Brooks
Special Ed Body Geometry
Terry
WTB
Charge Spoon for cheap backup
Likes For DorkDisk:
#19
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Flat and Firm
I'd be careful about the WTB or Terry saddles, as they often add unnecessary padding.
For me and my butt, the trick(s) are flat sit bone area (that means flat in the cross-wise direction, not cupped and not arched), flat sit bone area fore-and-aft, and firm (either with no padding or minimal padding). Also, there's narrow, but I can tolerate a bit of width if the rest is correct. A Brooks B-17 or equivalent is about as wide as I like to go. I like the older B17N.
After riding for now nearly 50 years, my butt is pretty well conditioned to ride on anything. That is, as long as the saddle is properly positioned, and pitched to flat on the sit area. I don't require special padding or any such thing in my shorts or tights, mostly a bit of moisture wicking and some airflow. Tri-shorts are a nice compromise.
The OP might like the Brooks. The modern production ones have flimsy (pretty thin) leather that breaks in quickly. I don't prefer them (modern ones) for that reason alone. Of course, the OP didn't share the bike type or saddle to handlebar drop, which would've been helpful...
For me and my butt, the trick(s) are flat sit bone area (that means flat in the cross-wise direction, not cupped and not arched), flat sit bone area fore-and-aft, and firm (either with no padding or minimal padding). Also, there's narrow, but I can tolerate a bit of width if the rest is correct. A Brooks B-17 or equivalent is about as wide as I like to go. I like the older B17N.
After riding for now nearly 50 years, my butt is pretty well conditioned to ride on anything. That is, as long as the saddle is properly positioned, and pitched to flat on the sit area. I don't require special padding or any such thing in my shorts or tights, mostly a bit of moisture wicking and some airflow. Tri-shorts are a nice compromise.
The OP might like the Brooks. The modern production ones have flimsy (pretty thin) leather that breaks in quickly. I don't prefer them (modern ones) for that reason alone. Of course, the OP didn't share the bike type or saddle to handlebar drop, which would've been helpful...
Last edited by Phil_gretz; 03-05-20 at 08:40 AM.
Likes For Phil_gretz:
#20
Newbie
My LBS has a large pile of takeoff saddles, taken from new bikes when the purchaser would want a larger 'comfort' seat. They let me have all i want, either cheap ($10) or free, depending on how many of any type are there. These are nice higher end saddles from Fabric, WTB and more. I get to try all sorts of profiles for as long as I want and have a nice selection at home now. You may try this as well before splashing out on some $80+ saddle based on a stranger's advice.
#21
Junior Member
Join Date: Feb 2019
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I like the old school Selle Italia Turbo saddle for almost everything ---- the rounded profile is nice compared to the angular shells on a lot of modern saddles --- But that said, I also tried a Specialized Power saddle on one of my road bikes on the advise of my LBS's staff --- its great - If I had the budget, id have several of these
But saddle choice being highly individual, id try to visit a Specialized dealer if any are in your area and see if you can demo a saddle or two
But saddle choice being highly individual, id try to visit a Specialized dealer if any are in your area and see if you can demo a saddle or two
#22
Senior Member
Join Date: Oct 2016
Posts: 721
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 362 Post(s)
Liked 415 Times
in
244 Posts
Now that warmer weather is here, and I’m in a new city with longer bike trails, I’m putting more miles on my bike. It’s mostly weekends now that I work a desk job M-F.
I used to ride a little every day, but I don’t think that’s gonna happen now. This weekend I logged more miles than usual and those 2 little spots under my sitbones feel sore, bruised.
I’m on the stock Jamis saddle which is pretty narrow. I’m thinking I might try something wider, maybe a Brooks B17 or Selle Anatomica. I’m wondering if only riding weekends is gonna take too long to break in the Brooks? Any thoughts or other suggestions?
Thanks!
Oh yeah, I ride a steel frame road bike, on paved trails. I ride on the hoods a lot, not so much on the drops.
I used to ride a little every day, but I don’t think that’s gonna happen now. This weekend I logged more miles than usual and those 2 little spots under my sitbones feel sore, bruised.
I’m on the stock Jamis saddle which is pretty narrow. I’m thinking I might try something wider, maybe a Brooks B17 or Selle Anatomica. I’m wondering if only riding weekends is gonna take too long to break in the Brooks? Any thoughts or other suggestions?
Thanks!
Oh yeah, I ride a steel frame road bike, on paved trails. I ride on the hoods a lot, not so much on the drops.
Likes For noimagination:
#23
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 543
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 272 Times
in
105 Posts
If it's sore sit bones, that is a fitness issue, not an equipment issue. If your sit bones are sore, you need more saddle time. If your "nether regions" are abraded/raw, or you have saddle sores, or you have perineal numbness, that could be a either a saddle issue or it could be a fit issue.
I do feel great everywhere else, it’s just sore sit bones. I am getting exercise, but I’ve had almost zero saddle time this winter.
#24
Senior Member
Join Date: Sep 2019
Location: Portland
Posts: 1,115
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 451 Post(s)
Liked 364 Times
in
227 Posts
I'd be careful about the WTB or Terry saddles, as they often add unnecessary padding.
For me and my butt, the trick(s) are flat sit bone area (that means flat in the cross-wise direction, not cupped and not arched), flat sit bone area fore-and-aft, and firm (either with no padding or minimal padding). Also, there's narrow, but I can tolerate a bit of width if the rest is correct. A Brooks B-17 or equivalent is about as wide as I like to go. I like the older B17N.
After riding for now nearly 50 years, my butt is pretty well conditioned to ride on anything. That is, as long as the saddle is properly positioned, and pitched to flat on the sit area. I don't require special padding or any such thing in my shorts or tights, mostly a bit of moisture wicking and some airflow. Tri-shorts are a nice compromise.
The OP might like the Brooks. The modern production ones have flimsy (pretty thin) leather that breaks in quickly. I don't prefer them (modern ones) for that reason alone. Of course, the OP didn't share the bike type or saddle to handlebar drop, which would've been helpful...
For me and my butt, the trick(s) are flat sit bone area (that means flat in the cross-wise direction, not cupped and not arched), flat sit bone area fore-and-aft, and firm (either with no padding or minimal padding). Also, there's narrow, but I can tolerate a bit of width if the rest is correct. A Brooks B-17 or equivalent is about as wide as I like to go. I like the older B17N.
After riding for now nearly 50 years, my butt is pretty well conditioned to ride on anything. That is, as long as the saddle is properly positioned, and pitched to flat on the sit area. I don't require special padding or any such thing in my shorts or tights, mostly a bit of moisture wicking and some airflow. Tri-shorts are a nice compromise.
The OP might like the Brooks. The modern production ones have flimsy (pretty thin) leather that breaks in quickly. I don't prefer them (modern ones) for that reason alone. Of course, the OP didn't share the bike type or saddle to handlebar drop, which would've been helpful...
Likes For bpcyclist:
#25
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,406
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Briefly, cushioning on a saddle both compresses and expands. As you sit on a soft saddle and sink in, the padding pushes back on the softer parts, potentially causing saddle sores and/or numbness.
Likes For Unca_Sam: