Go Back  Bike Forums > Bike Forums > Singlespeed & Fixed Gear
Reload this Page >

Attaching rear rack to FG without braze-ons

Notices
Singlespeed & Fixed Gear "I still feel that variable gears are only for people over forty-five. Isn't it better to triumph by the strength of your muscles than by the artifice of a derailer? We are getting soft...As for me, give me a fixed gear!"-- Henri Desgrange (31 January 1865 - 16 August 1940)

Attaching rear rack to FG without braze-ons

Old 11-23-14, 09:49 AM
  #1  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Attaching rear rack to FG without braze-ons

I'm not sure if it's blasphemy to attach a rear rack to a fixed gear, but i find i like a pannier much better then a backpack of messenger bag.

My problem is that my current rack is a seatpost mounted unit (pictured below), and if i put anything that weighs more then a gallon of milk in there, the rack flexes enough to hit the spokes of my wheel on bumps and turns. Not to mention i hate the way it looks... and the height of where the weight is being carried isn't helping my already weak trackstand kung fu.

So does anyone know of any options for mounting a more traditional rack to a frame without braze-ons? or better yet, have any experience with a specific brand and pictures of how you've mounted it?




Options i've found so far are below, but i would like to see if anyone has some more creative/better ones

Thule rack: review are mixed, and even uglier then a seatpost rack, but brings the weight lower
Thule Pack ?n Pedal Tour Rack - Thule

Axiom Streamliner Road DLX: Really like the way this one looks, but brackets look like they would flex alot and have to be modified for the axles. Also not sure how i feel about removing rack to change a flat.
Streamliner Road DLX - Streamliner Racks - Racks - Products - Axiom Performance Gear

Bontrager Backrack: looks like better brackets then the Axiom, but same cons regarding removing for flats.
Bontrager: BackRack Lightweight (Model #08214)

Alternatively, how do people feel about drilling and tapping the dropouts. Not sure if i would do it, but maybe something to consider? my dropouts look like theres enough extra meat possibly.

SGMongoose is offline  
Old 11-23-14, 10:02 AM
  #2  
Nagrom_
Fixie Infamous
 
Nagrom_'s Avatar
 
Join Date: Dec 2011
Location: SF
Posts: 10,474

Bikes: 2007 CAAD Optimo Track, 2012 Cannondale CAAD10, 1996 GT Force restomod, 2015 Cannondale CAADX

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Tap it, or P clamps. In that order.
Nagrom_ is offline  
Old 11-23-14, 10:08 AM
  #3  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Nagrom_
Tap it, or P clamps. In that order.
i know i'm ignoring the order already... but P-clamps would be okay for the bottom mounts also? seems the consensus from my google searches says to only use them for the top seat stay mounts
SGMongoose is offline  
Old 11-23-14, 10:18 AM
  #4  
TejanoTrackie 
Veteran Racer
 
TejanoTrackie's Avatar
 
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,757

Bikes: 32 frames + 80 wheels

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1331 Post(s)
Liked 762 Times in 431 Posts
P-clamps are fine for fenders but not for main rack supports IMO. Since your frame dropouts are aluminum, it will be very easy to drill and tap them for rack mounting bolts. That's what I would do.
__________________
What, Me Worry? - Alfred E. Neuman

Originally Posted by Dcv
I'd like to think i have as much money as brains.
I see the light at the end of the tunnel, but the tunnel keeps getting longer - me
TejanoTrackie is offline  
Old 11-23-14, 10:45 AM
  #5  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4742 Post(s)
Liked 3,860 Times in 2,509 Posts
If you had a steel fork, I would suggest a Low Rider rack up front. Much nicer when going uphill, especially when loaded as the bike behaves very closely to when it is light. (None of the whole bike whipping around the handlebars when you rock it standing.)

I have been riding fixed with Low Riders for something like 30 years. If I absolutely have to put a rear rack on to carry something, it comes off as soon as that job is done. A drawback to Low Riders is that they have no suspension between them and the front wheel, so I would not put a laptop in them. They also require that you have a large enough and inflated enough front tire to avoid wheel damage when you hit potholes.

Ben
79pmooney is offline  
Old 11-23-14, 11:19 AM
  #6  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
thanks for the insight. so i guess the consensus so far is to drill. i was hoping not too but i guess i should suck it up
SGMongoose is offline  
Old 11-23-14, 02:57 PM
  #7  
jlafitte 
Pirate/Smuggler
 
jlafitte's Avatar
 
Join Date: Nov 2012
Location: Marigny/Leucadia
Posts: 1,184
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 7 Posts
Dude this is what a Kilo is for. Clean up the Bianchi and keep it for barhopping.
jlafitte is offline  
Old 11-23-14, 06:11 PM
  #8  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by jlafitte
Dude this is what a Kilo is for. Clean up the Bianchi and keep it for barhopping.
Thats actually the type of comment i was expecting. And while i kind of agree, my Bianchi isn't vintage or one of a kind so i don't really see the harm other then, yes, i am ruining the lines of the bike. and honestly, i don't see myself using the Bianchi much if i had another more practical bike.. and i bought the Bianchi cause i like the way it looks and rides, and really don't need another money pit.

And also.. it's too late anyway. I stopped into a bike shop while out on a ride with my GF and mentioned what was suggested by Nagrom and Tejano. They said they've done it before, and offered to do it for what i thought was way too cheap. They even let me buy a rack i liked off a new bike since i didn't like the off the shelf racks they had on hand. So i bit the bullet and went through with the drill/tap. They did an outstanding job in my opinion making it work.. and the seat post collar was a nice touch. I'll have some clearance issues when i switch cogs, but nothing a file won't fix.



SGMongoose is offline  
Old 11-23-14, 06:35 PM
  #9  
Leukybear 
THE STUFFED
 
Leukybear's Avatar
 
Join Date: Oct 2009
Location: San Francisco, CA
Posts: 12,678

Bikes: R. Sachs Road; EAI Bareknuckle; S-Works Enduro

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 361 Post(s)
Likes: 0
Liked 20 Times in 17 Posts
Wow that turned out great!

By the way, what rack is that?
Leukybear is offline  
Old 11-23-14, 06:58 PM
  #10  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Leukybear
Wow that turned out great!

By the way, what rack is that?
Thanks, i'm very happy with it and i think it's a world of difference in the looks department from what i previously had.
I did strike my heel a few times on the bag when i didn't clip in right away.. but it shouldn't be an issue since i more often then not leave my left foot clipped in... an there are no clearance issues once i clipped in.

I just looked at the rack and there is no branding on it. they took it off a new Fuji Touring bike since i didn't like the other racks they had on hand. So i can only assume its a Fuji specific rack or a no-name generic. Seems as sturdy as any other rack. The seat collar looks to originally of been of the quick release variety.. and they replaced the the original release with a stainless bolt and lock nut. I believe they sourced the struts from a different rack as well, because i don't remember them being stainless or that long on the fuji. Possibly from a planet bike rack, as they said that was what they were going to replace it with on the Fuji
SGMongoose is offline  
Old 11-23-14, 07:02 PM
  #11  
Leukybear 
THE STUFFED
 
Leukybear's Avatar
 
Join Date: Oct 2009
Location: San Francisco, CA
Posts: 12,678

Bikes: R. Sachs Road; EAI Bareknuckle; S-Works Enduro

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 361 Post(s)
Likes: 0
Liked 20 Times in 17 Posts
Haha in that case I guess you can claim it as "custom".
Leukybear is offline  
Old 11-23-14, 07:14 PM
  #12  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
yep, once this thread is old and forgotten.. its going to be "designed and welded it myself"
SGMongoose is offline  
Old 11-23-14, 10:16 PM
  #13  
jlafitte 
Pirate/Smuggler
 
jlafitte's Avatar
 
Join Date: Nov 2012
Location: Marigny/Leucadia
Posts: 1,184
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 7 Posts
Came out pretty nice! Gotta admit.
jlafitte is offline  
Old 11-23-14, 11:02 PM
  #14  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
+1, that's a slick install.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 11-24-14, 12:39 AM
  #15  
europa
Grumpy Old Bugga
 
europa's Avatar
 
Join Date: Oct 2006
Location: Adelaide, AUSTRALIA
Posts: 4,229

Bikes: Hillbrick, Malvern Star Oppy S2, Europa (R.I.P.)

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Likes: 0
Liked 8 Times in 6 Posts
Well done.

Nothing wrong with racks on fixed gear bikes. My Hillbrick is custom made (genuinely so) and I specified mounting points for the same reasons you use a pannier.
europa is offline  
Old 11-24-14, 07:21 AM
  #16  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks guys. Probably would have looked even better on a steel frame, but with the pannier off it really doesn't draw your eyes to it as much as the seat post mounted rack.
SGMongoose is offline  
Old 11-24-14, 07:24 AM
  #17  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by europa
Well done.

Nothing wrong with racks on fixed gear bikes. My Hillbrick is custom made (genuinely so) and I specified mounting points for the same reasons you use a pannier.
Thanks. i'm glad to hear you say that. I've actually never considered panniers before because to me it looked like the equivalent of a fanny pack on a tourist... Way too functional and no style. Having just moved to the Boston area, i started noticing how many people had racks or racks with panniers, and the look really started to grow on me. and of course, once i tried it, there was no going back.
SGMongoose is offline  
Old 11-24-14, 11:27 AM
  #18  
50voltphantom
Senior Member
 
50voltphantom's Avatar
 
Join Date: Feb 2014
Location: SD
Posts: 2,749

Bikes: Handsome Fredward, Trek 1.1

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 131 Times in 47 Posts
Nice job!

Holy cow I love that frame and fork....that may be the thing to replace my Steamroller with.
50voltphantom is offline  
Old 11-24-14, 01:31 PM
  #19  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by 50voltphantom
Nice job!

Holy cow I love that frame and fork....that may be the thing to replace my Steamroller with.
Thanks, You should check out the Pista Sei Giorni if you don't plan on running a rear brake. Same frame and fork minus brake bosses and rear brake mount.
SGMongoose is offline  
Old 11-24-14, 02:07 PM
  #20  
50voltphantom
Senior Member
 
50voltphantom's Avatar
 
Join Date: Feb 2014
Location: SD
Posts: 2,749

Bikes: Handsome Fredward, Trek 1.1

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 131 Times in 47 Posts
Originally Posted by SGMongoose
Thanks, You should check out the Pista Sei Giorni if you don't plan on running a rear brake. Same frame and fork minus brake bosses and rear brake mount.
Exactly why I like the Dalmine. I ride with a freewheel so a Pista frame with cable stops is awesome.
50voltphantom is offline  
Old 11-24-14, 04:02 PM
  #21  
SGMongoose
Senior Member
Thread Starter
 
Join Date: Aug 2014
Location: Cambridge, MA
Posts: 53

Bikes: Bianchi Pista

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by 50voltphantom
Exactly why I like the Dalmine. I ride with a freewheel so a Pista frame with cable stops is awesome.
If thats the case, definitely the frame for you. I would keep an eye out on craigslist and eBay then.. i believe they only made it for two years
SGMongoose is offline  
Old 11-24-14, 04:17 PM
  #22  
50voltphantom
Senior Member
 
50voltphantom's Avatar
 
Join Date: Feb 2014
Location: SD
Posts: 2,749

Bikes: Handsome Fredward, Trek 1.1

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 131 Times in 47 Posts
Originally Posted by SGMongoose
If thats the case, definitely the frame for you. I would keep an eye out on craigslist and eBay then.. i believe they only made it for two years
Kind of a hard to find beast, none on eBay in recent history.
50voltphantom is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fishboat
Touring
88
08-21-16 07:45 PM
commonmarket
Touring
13
03-16-12 09:01 PM
Ember
Bicycle Mechanics
7
03-30-11 05:32 PM
anaheim flash
Commuting
5
02-10-10 12:24 PM
casina
Bicycle Mechanics
7
12-30-09 07:48 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.