Can this high end steel Rossin be saved?
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Posts: 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can this high end steel Rossin be saved?
Here is a Rossin I am looking at. It has NEMO tubing and the frameset is only around 1500g
Can it be saved? I know a really good local framebuilder. It is my understanding that the best way to try and fix this would be to replace the whole chainstay. Should both be replaced? Would replacing one, or both effect the ride quality. Can you get tubing today that would match the rest of the bike?
Sorry for the dumb questions. I really love the frame!
Can it be saved? I know a really good local framebuilder. It is my understanding that the best way to try and fix this would be to replace the whole chainstay. Should both be replaced? Would replacing one, or both effect the ride quality. Can you get tubing today that would match the rest of the bike?
Sorry for the dumb questions. I really love the frame!
#3
Senior Member
Join Date: Jul 2015
Location: NW Oregon
Posts: 2,975
Bikes: !982 Trek 930R Custom, Diamondback ascent with SERIOUS updates, Fuji Team Pro CF and a '09 Comencal Meta 5.5
Mentioned: 15 Post(s)
Tagged: 1 Thread(s)
Quoted: 1299 Post(s)
Liked 739 Times
in
534 Posts
yes... it can be saved... and there are probably still tubes available... Ask Andy Gilmour, he is one of the best at such repairs, and extremely knowledgeable.... good people, too!
Gilmour Bicycles
Gilmour Bicycles
Last edited by maddog34; 08-13-17 at 05:12 PM.
#4
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26427 Post(s)
Liked 10,382 Times
in
7,210 Posts
.
...why not ask the local frame builder ? Then you can get an idea of cost.
As stated above, it will probably be more than you want to pay.
...why not ask the local frame builder ? Then you can get an idea of cost.
As stated above, it will probably be more than you want to pay.
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26427 Post(s)
Liked 10,382 Times
in
7,210 Posts
.
...in the future, just as an FYI, it's considered poor form to start the same thread in two different forums simultaneously.
...in the future, just as an FYI, it's considered poor form to start the same thread in two different forums simultaneously.
#6
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
Yes, it can be saved, and it might even cost less than a comparable new or used frame, but probably not a whole lot less.
So, shop for quotes, and at the same for comparable used frames. Then compare, add whatever emotional or sentimental value and decide which way to go.
So, shop for quotes, and at the same for comparable used frames. Then compare, add whatever emotional or sentimental value and decide which way to go.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#7
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
But this seems to be common with relative newbs, so we make allowances.
The issue is it divides the responses, and something that might be useful falls between the cracks.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#8
Senior Member
Join Date: Apr 2013
Location: Amsterdam
Posts: 1,662
Bikes: 1980 Koga-Miyata Gentsluxe-S, 1998 Eddy Merckx Corsa 01, 1983 Tommasini Racing, 2012 Gulf Western CAAD10, 1980 Univega Gran Premio
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 600 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
I'm sorry, but I had to chuckle at the green circle and two arrows. "Oh, that damage, I didn't notice when I first looked."
I would say that unless this is a frame you've used and loved for years, and you know it's perfect for you and has no other rust or damage issues, then perhaps it's worth the expense of trying to fix. Otherwise, look for a similar frame that is good to go.
I would say that unless this is a frame you've used and loved for years, and you know it's perfect for you and has no other rust or damage issues, then perhaps it's worth the expense of trying to fix. Otherwise, look for a similar frame that is good to go.
#9
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,558
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Liked 2,180 Times
in
1,470 Posts
#10
Banned.
As mentioned, it would have to be free and you would have to be willing to put $600 into it, minimum, with tube replacement and repaint.
Not sure if it's a $600 frame when you're done, but if you like it...
Not sure if it's a $600 frame when you're done, but if you like it...
#11
Junior Member
Thread Starter
Join Date: Aug 2011
Posts: 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks guys... Did not mean to post duplicate actually.
its a really nice frame that I can get for around $50
I guess my two questions are:
1. Would using different tubing than the rest of the frame effect ride quality?
2. Should I replace both chainstays so the ride is "even" or will that make no difference really?
its a really nice frame that I can get for around $50
I guess my two questions are:
1. Would using different tubing than the rest of the frame effect ride quality?
2. Should I replace both chainstays so the ride is "even" or will that make no difference really?
#12
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,099 Times
in
914 Posts
JB Weld and aluminum tape.
I kid. I'm a sucker for a frame that needs TLC, but even I wouldn't touch that one. Only if it were already mine and had sentimental value.
I kid. I'm a sucker for a frame that needs TLC, but even I wouldn't touch that one. Only if it were already mine and had sentimental value.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#13
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,099 Times
in
914 Posts
To answer your question from the perspective of "just a guy who rides bikes a lot" I.e. Not an expert, ride quality may very well be affected based on the skill of the repair but I don't think replacing just the one side or using slightly different tubing will make that big a difference.
If the person you choose to make the repair can't give a good answer to that question I would think he/she might not be the right person to make the repair anyway.
For $50, if it comes with the fork, go for it and you get your money's worth right there if it doesn't work out.
If the person you choose to make the repair can't give a good answer to that question I would think he/she might not be the right person to make the repair anyway.
For $50, if it comes with the fork, go for it and you get your money's worth right there if it doesn't work out.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#14
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
It is a really cool looking fillet brazed BB.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#15
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
Yes.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#16
Senior Member
Join Date: May 2015
Location: Richmond VA area
Posts: 2,618
Bikes: '00 Koga Miyata Full Pro Oval Road bike.
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 475 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Very expensive fix once paint gets involved, too. You'd better really love the frame.
#17
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26427 Post(s)
Liked 10,382 Times
in
7,210 Posts
Thanks guys... Did not mean to post duplicate actually.
its a really nice frame that I can get for around $50
I guess my two questions are:
1. Would using different tubing than the rest of the frame effect ride quality?
2. Should I replace both chainstays so the ride is "even" or will that make no difference really?
its a really nice frame that I can get for around $50
I guess my two questions are:
1. Would using different tubing than the rest of the frame effect ride quality?
2. Should I replace both chainstays so the ride is "even" or will that make no difference really?
I've not seen a similar fillet brazing construction with a lightweight, thin walled tubeset, and I have to wonder why.
Not saying it couldn't be safely done, I'm just musing that the heating and cooling cycle involved in fillet brazing that joint might have resulted in some embrittlement of the frame tubing. I don't know enough about NEMO steel tubing to speak with any authority.
#18
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
#20
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
...you ought to also be asking yourself, "If this stay failed from repetitive stress (because the tubing has very thin walls, and the frame itself is pretty lightweight), then what are the odds that the same thing will or won't happen in another frame member soon ?"
I've not seen a similar fillet brazing construction with a lightweight, thin walled tubeset, and I have to wonder why.
Not saying it couldn't be safely done, I'm just musing that the heating and cooling cycle involved in fillet brazing that joint might have resulted in some embrittlement of the frame tubing. I don't know enough about NEMO steel tubing to speak with any authority.
I've not seen a similar fillet brazing construction with a lightweight, thin walled tubeset, and I have to wonder why.
Not saying it couldn't be safely done, I'm just musing that the heating and cooling cycle involved in fillet brazing that joint might have resulted in some embrittlement of the frame tubing. I don't know enough about NEMO steel tubing to speak with any authority.
That being said, most of the fillet brazed bikes that I've seen (with the exception of the heavier, but much more "production" Super Sport/Sports Tourer/High Sierra/Cimarron... All Schwinns... hmmm) are mostly boutique builders.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#21
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Some of the early constructeurs used fillet-brazing and thinwall tubing to make extra-light frames. Lugs must have been more popular or easier to use, though, since that's what they reverted to for most bikes.
#23
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
Not worth the hassle - unless it was a sentimental deal ----- given to you by a dear family member or something
that break is caused by corrosion and I would be worried about there being more of it in other places
--- Rust never sleeps, as the song goes
Frame repair - and it wont be cheap for a nice fillet brazed repair - plus at minimum $4-500 for re-paint --- I think your looking at $7-800 at least for this repair
that break is caused by corrosion and I would be worried about there being more of it in other places
--- Rust never sleeps, as the song goes
Frame repair - and it wont be cheap for a nice fillet brazed repair - plus at minimum $4-500 for re-paint --- I think your looking at $7-800 at least for this repair
#24
Member
Join Date: Aug 2013
Location: Saint Paul, MN
Posts: 32
Bikes: '78 Raleigh Competition GS, 63 Raleigh Sports, '34 Raleigh Sports
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I believe the person selling this would be very happy with $50. He gets $50 and doesn't have to spend his time disposing of the frame... you on the other hand...
#25
Novist senior member
I had a break like that at the rear drop out. LBS owner is a frame builder. Repaired the break 45$. He didn't replace the stay just did an almost invisible weld.