Finish tape missing inside my box of handlebar wrap... what to use?
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Posts: 112
Bikes: Schwinn OR2 Hybrid Bike 28" - Schwinn LeTour II 27"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Finish tape missing inside my box of handlebar wrap... what to use?
Hello all,
Quick question, what should I use? Gaffer's tape or black duct tape (to match the color) is the first thing that comes to mind. As a temporary measure I'm using zip ties to keep tension at the ends.
Thanks,
Max
Quick question, what should I use? Gaffer's tape or black duct tape (to match the color) is the first thing that comes to mind. As a temporary measure I'm using zip ties to keep tension at the ends.
Thanks,
Max
#2
Senior Member
Join Date: Oct 2007
Location: West Yorkshire, United Kingdom
Posts: 5,773
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 454 Post(s)
Liked 104 Times
in
87 Posts
Electrical tape works well for this, would not want to use zip ties, as these have shape edges from cutting where you are putting your hands
#5
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#6
Senior Member
Join Date: Sep 2009
Location: SW Washington
Posts: 167
Bikes: '10 C'Dale CAAD9 4, '09 S-Works Tricross, Gary Fisher Tassahara
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Funny, I have never used the finishing tape. I always end up using electrical tape.
#7
Senior Member
Join Date: Sep 2007
Location: Gaseous Cloud around Uranus
Posts: 3,741
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Likes: 0
Liked 11 Times
in
7 Posts
What is this "finish tape" you speak? Is it's a conspiracy by 3M and Scotch? If you wrap the tape the right way,you don't need any tape. When did people start wrapping tape backwards anyways......
I have thick leather wrap on my bars and I don't seem to have any problems tucking it in the ends with caps,there's a big hole there.
I always wondered what that tape was for......
I have thick leather wrap on my bars and I don't seem to have any problems tucking it in the ends with caps,there's a big hole there.
I always wondered what that tape was for......
Last edited by Booger1; 03-25-11 at 09:56 AM.
#8
Senior Member
Join Date: Dec 2006
Location: So Cal
Posts: 2,678
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yes 3M electrical tape works good for bar wrap, that said I no longer use any tape as I have learned how to wrap my tape from the stem side to the bar end and use the plug cap to keep it all in place.
__________________
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
#9
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,454
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4247 Post(s)
Liked 2,955 Times
in
1,813 Posts
Black electrical tape. Finish tape is those 2 little strips that are about an inch wide and 6 inches or less long (actually more like stickers with their backing) that you use to wrap the end nearest the stem if you wrapped it the right way. Either that or it's special tape from finland you use you wrap your bars with reindeer hide.
#10
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#11
Senior Member
Join Date: Mar 2010
Posts: 158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Twine, see Rivendale site . You can get it at a craft store. Get a color to match a color on your bike. Get a larger diameter . With practice you can make a finished end like a custom fly rod has on it's eyelets. Amaze your friends, be the envy of others that use electric tape.......
Cheers all.....
Cheers all.....
#12
Hello
Gaffers tape....because it is less prone to come un-done and smear sticky around like electrical... besides I bought 5 rolls at a garage sale.
#13
Senior Member
Twine, see Rivendale site . You can get it at a craft store. Get a color to match a color on your bike. Get a larger diameter . With practice you can make a finished end like a custom fly rod has on it's eyelets. Amaze your friends, be the envy of others that use electric tape.......
Cheers all.....
Cheers all.....
#14
Senior Member
Join Date: May 2009
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Get it at your local hardware store. It comes in Black, Blue, Brown, Gray, Green, Orange, Red, Violet, White, and Yellow. I have a selection of colors at home to choose from to match or coordinate with the bar tape color.
It's stretchy, so it conforms well to contours of the tape end. Don't go wild stretching it and it sticks down very well. I've never had it come loose or become sticky. I didn't know people used anything else.
#16
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Get it at your local hardware store. It comes in Black, Blue, Brown, Gray, Green, Orange, Red, Violet, White, and Yellow. I have a selection of colors at home to choose from to match or coordinate with the bar tape color.
It's stretchy, so it conforms well to contours of the tape end. Don't go wild stretching it and it sticks down very well. I've never had it come loose or become sticky. I didn't know people used anything else.
The finishing tape that comes in the box is just another one of those cycling related things I just throw away. (Along with valve nuts and caps.)
#18
Senior Member
Thread Starter
Join Date: Jan 2011
Posts: 112
Bikes: Schwinn OR2 Hybrid Bike 28" - Schwinn LeTour II 27"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Get it at your local hardware store. It comes in Black, Blue, Brown, Gray, Green, Orange, Red, Violet, White, and Yellow. I have a selection of colors at home to choose from to match or coordinate with the bar tape color.
It's stretchy, so it conforms well to contours of the tape end. Don't go wild stretching it and it sticks down very well. I've never had it come loose or become sticky. I didn't know people used anything else.
Thanks for all the advice .
#19
Senior Member
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438
Bikes: Trek 5500, Colnago C-50
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
I wrap mine the "right" way and finish it off with black electrical tape. Cinelli black cork wrapped this way will last a long long time.
#21
Senior Member
Join Date: Jul 2010
Location: Victoria, Canada
Posts: 1,541
Bikes: Cannondale t1, Koga-Miyata World Traveller
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
The lay of the tape increases the wind drag induced by the handlebars. All serious racers have their tape wrapped starting at the drops.
If you ascribe to this theory, I have a bridge I'd like to sell you.
#22
Roadkill
Join Date: Sep 2004
Location: East Tennessee
Posts: 858
Bikes: 2002 Lightspeed Classic; 2010 Pedalforce RS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I bought some Arundel bar tape a while back, looks OK, but I haven't tried it yet, but the instructions on the box answer the OP:
1) Remove old stinky tape and scrub sweat residue off bars.
2) If bars are corroded, buy new bars. This is no time to save money.
3) Place a 3” section of Arundel tape around brake clamp to cover it up.
4) Begin wrapping from the end.
5mm-8mm overlap.
Maintain constant pressure. but don’t tear it!
5) Continue wrapping until you run into the stem.
6) Un-wrap some tape because you went too far.
7) Cut end diagonally so it’s straight!
8) Slap the enclosed finishing tape” on your toolbox, chainstay, bumper, etc.
9) Find some nice electrical tape and use it to hold the barwrap in place.
10) Tuck the overlapped tape into the bar end and install the plugs.
11) Admire your fine work.
12) Ride Bike. Don’t crash!
2) If bars are corroded, buy new bars. This is no time to save money.
3) Place a 3” section of Arundel tape around brake clamp to cover it up.
4) Begin wrapping from the end.
5mm-8mm overlap.
Maintain constant pressure. but don’t tear it!
5) Continue wrapping until you run into the stem.
6) Un-wrap some tape because you went too far.
7) Cut end diagonally so it’s straight!
8) Slap the enclosed finishing tape” on your toolbox, chainstay, bumper, etc.
9) Find some nice electrical tape and use it to hold the barwrap in place.
10) Tuck the overlapped tape into the bar end and install the plugs.
11) Admire your fine work.
12) Ride Bike. Don’t crash!
#23
Senior Member
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 909
Bikes: Klein
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
+1 for the 3M Super 33. If you find the finishing tape, put it over the Super 33 if it looks nice.
#24
Collector of Useless Info
Join Date: Aug 2009
Posts: 1,404
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
At Lowes they have rubberized electrical tape with no adhesive- it just sticks to itself. It's quite a bit stretchier than vinyl electrical tape, and much easier to use. It's expensive- $3 a roll- but one roll should last nearly forever. It does a much nicer job of finishing, conforming to the handlebar and the wrap without all that nasty adhesive that melts when it gets hot and humid.
#25
Senior Member
Thread Starter
Join Date: Jan 2011
Posts: 112
Bikes: Schwinn OR2 Hybrid Bike 28" - Schwinn LeTour II 27"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yup, I stretched it nice and tight, but the tape I got from my LBS was cheap stuff from china and the bars on my LeTour II seem longer/wider & thicker than most modern bars I see in bike shops. As a single piece they would end up being about an inch short. I have a feeling though that the tape they had just isn't as long as good brands.
Thats awesome haha.
I bought some Arundel bar tape a while back, looks OK, but I haven't tried it yet, but the instructions on the box answer the OP:
1) Remove old stinky tape and scrub sweat residue off bars.
2) If bars are corroded, buy new bars. This is no time to save money.
3) Place a 3” section of Arundel tape around brake clamp to cover it up.
4) Begin wrapping from the end.
5mm-8mm overlap.
Maintain constant pressure. but don’t tear it!
5) Continue wrapping until you run into the stem.
6) Un-wrap some tape because you went too far.
7) Cut end diagonally so it’s straight!
8) Slap the enclosed finishing tape” on your toolbox, chainstay, bumper, etc.
9) Find some nice electrical tape and use it to hold the barwrap in place.
10) Tuck the overlapped tape into the bar end and install the plugs.
11) Admire your fine work.
12) Ride Bike. Don’t crash!
2) If bars are corroded, buy new bars. This is no time to save money.
3) Place a 3” section of Arundel tape around brake clamp to cover it up.
4) Begin wrapping from the end.
5mm-8mm overlap.
Maintain constant pressure. but don’t tear it!
5) Continue wrapping until you run into the stem.
6) Un-wrap some tape because you went too far.
7) Cut end diagonally so it’s straight!
8) Slap the enclosed finishing tape” on your toolbox, chainstay, bumper, etc.
9) Find some nice electrical tape and use it to hold the barwrap in place.
10) Tuck the overlapped tape into the bar end and install the plugs.
11) Admire your fine work.
12) Ride Bike. Don’t crash!
Last edited by Max C.; 03-25-11 at 05:52 PM.