Which pedals for my Road Bike?
#1
Senior Member
Thread Starter
Which pedals for my Road Bike?
Hi everyone, my apologies for asking a question that I know probably comes up all the time. I'm looking for suggestions about new pedals for my relatively new road bike (about 150 miles is all but I'm using it more and more). I've used SPD Mountain Bike pedals on different bikes in the past - both M520 and PD M324's and got along with both just fine. I no longer have either of those bikes/pedals, but still have the mountain bike shoes that I used with them. So just wondering if I should get another set of SPD's and just use the same shoes, or a whole new system, like the SPD-SL road pedals, which would require a new pair of shoes, of course. Some have told me the mountain bike style are easier to clip in and out of and that the difference is negligible for a beginner road cyclist (aka., slow rider) like myself. Here's the detail on my gear / usage / interest:
The bike: Giant Contend 3 2019 (entry level components like Claris, relaxed Geometry, but works well for me). Right now the bike has platform pedals with toe clips and straps. Decent quality but I am not a huge fan of the clips and straps.
My use: As you could probably guess from the line above, I'm not a racer and probably won't be. Will be using this bike for alot of solo rides around town (some traffic, intersections, some trails, residential neighborhoods, etc.). Would like to get involved in the local cycling clubs for longer group rides, maybe something like century rides way down the line. But right now mostly city and trail rides anywhere from 1 to 3 hours long.
Outside of this I probably won't spend too much time or money trying to upgrade the bike.
Bottom line: I definitely don't want to stick with the flat. Just wondering if I get some mountain bike pedals (which I'm familiar with) and use the same shoes I have. Or is it really worth it to go with a road pedal/style knowing I'm not really a racer nor that concerned with speed/weight. I almost always use the mountain bike shoes now, even on the flat pedals, just because they are reasonably stiff and feel good on rides.
The bike: Giant Contend 3 2019 (entry level components like Claris, relaxed Geometry, but works well for me). Right now the bike has platform pedals with toe clips and straps. Decent quality but I am not a huge fan of the clips and straps.
My use: As you could probably guess from the line above, I'm not a racer and probably won't be. Will be using this bike for alot of solo rides around town (some traffic, intersections, some trails, residential neighborhoods, etc.). Would like to get involved in the local cycling clubs for longer group rides, maybe something like century rides way down the line. But right now mostly city and trail rides anywhere from 1 to 3 hours long.
Outside of this I probably won't spend too much time or money trying to upgrade the bike.
Bottom line: I definitely don't want to stick with the flat. Just wondering if I get some mountain bike pedals (which I'm familiar with) and use the same shoes I have. Or is it really worth it to go with a road pedal/style knowing I'm not really a racer nor that concerned with speed/weight. I almost always use the mountain bike shoes now, even on the flat pedals, just because they are reasonably stiff and feel good on rides.
#2
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,473
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1743 Post(s)
Liked 1,281 Times
in
740 Posts
As a recreational rider I don't think you would be sacrificing anything going with Mtn bike pedals.
#3
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Likes For caloso:
#4
Member
Join Date: Apr 2016
Location: Northern Colorado
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
3 Posts
I use SPD Pedals on both my road bikes. PD-A600 & XT PD-M8020
I walk around some when on rides is the reason I use SPD.
If you are concerned about clipping out, get SH-56 cleats. They are easier to release than SH-51.
You will fall over at least once. Usually slow speed (pulling up to a stop) where the only thing that gets hurt is your pride.
I walk around some when on rides is the reason I use SPD.
If you are concerned about clipping out, get SH-56 cleats. They are easier to release than SH-51.
You will fall over at least once. Usually slow speed (pulling up to a stop) where the only thing that gets hurt is your pride.
Last edited by alfordjo; 04-27-20 at 03:28 PM. Reason: More info
#5
Member
I am not a racer or an expert on the minutia, but I have been using SPD pedals for years. I recently got road SPD pedals for my steel FG/SS bike just so I could use the same shoes with both bikes. The road pedals are OK, but they are only one-sided, so it's kind of a PITA to get into sometimes while my mountain bike pedals are two-sided. I assume they did this to save weight, but I can't imagine it's much weight, and for people like us won't make any difference to wind resistance, weight, etc; so I don't see the point. I probably should have just gotten MTB pedals and I would have not noticed a difference except it would have been easier to get in. The road pedals do look a little more sleek so style-wise they match the bike a little better than I imagine MTB pedals would, but I don't think that would have mattered to me either. I have never used any other type of pedals before except for flats with clips. I have actually thought about switching to clips for my FG/SS just so I could wear any type of shoes, but I really prefer clipless especially when riding fixed.
Likes For MrAwesome:
#6
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,986
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,809 Times
in
3,317 Posts
SPD unless you have some overwhelming need to change. If someone gifted me a pair of dual sided Garmin Vector 3's, that might be overwhelming enough for me to change from SPD. <grin>
Likes For Iride01:
#7
Senior Member
Join Date: Apr 2018
Posts: 659
Bikes: Norco search xr
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 146 Times
in
90 Posts
SPD’s all the way! Easy to clip in. Easy to clip out. But most of all you can walk around in them! I have crossed streams in them. Walked across logs and been down steep banks in them. There just to useful.
#9
Newbie
Been riding my Giant Contend SL2 Disc Road bike for over two years with SPD pedals. I have a size 15 shoe, so it was easier for me to find MTB shoes than Road, so i opted for the SPD when i started. I ride for health and fun, not a racer. I see no reason to switch to Road Shoes. You won’t be missing on anything.
#10
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
This. I've raced my bike with SPD pedals and have no issues. (clarification, I meant my road bike, but I've also raced my gravel bike, which also has SPD pedals lol)
I've done centuries, won sprints on the A group ride, etc. The pedals are not holding me back, they're easier to use, and I can walk in the shoes. I'm running double sided XT pedals on the road bike.
I've done centuries, won sprints on the A group ride, etc. The pedals are not holding me back, they're easier to use, and I can walk in the shoes. I'm running double sided XT pedals on the road bike.
Likes For Rides4Beer:
#11
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,114
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 989 Post(s)
Liked 586 Times
in
440 Posts
The only bad thing I heard about SPDs is that the rider's weight is concentrated on one specific area of the shoes' sole since the cleats & clip-in section of the pedals are smaller than SPD-Sls, and this results in an unpleasant pressure point. I actually never tried SPDs for very long so I can't tell if it's true or not, but it does make sense.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
Last edited by eduskator; 04-28-20 at 08:15 AM.
#12
Senior Member
Join Date: Aug 2009
Posts: 8,550
Bikes: Wilier Izoard XP (Record);Cinelli Xperience (Force);Specialized Allez (Rival);Bianchi Via Nirone 7 (Centaur); Colnago AC-R Disc;Colnago V1r Limited Edition;De Rosa King 3 Limited(Force 22);DeRosa Merak(Red):Pinarello Dogma 65.1 Hydro(Di2)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 277 Times
in
145 Posts
The only bad thing I heard about SPDs is that the rider's weight is concentrated on one specific area of the shoes' sole since the cleats & clip-in section of the pedals are smaller than SPD-Sls, and this results in an unpleasant pressure point. I actually never tried SPDs for very long so I can't tell if it's true or not, but it does make sense.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
#13
Senior Member
The only bad thing I heard about SPDs is that the rider's weight is concentrated on one specific area of the shoes' sole since the cleats & clip-in section of the pedals are smaller than SPD-Sls, and this results in an unpleasant pressure point. I actually never tried SPDs for very long so I can't tell if it's true or not, but it does make sense.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
#14
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
The only bad thing I heard about SPDs is that the rider's weight is concentrated on one specific area of the shoes' sole since the cleats & clip-in section of the pedals are smaller than SPD-Sls, and this results in an unpleasant pressure point. I actually never tried SPDs for very long so I can't tell if it's true or not, but it does make sense.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
As I said above, I would only get these if I were city riding a lot. It's clearly a better option for someone who needs to clip/unclip a lot and walk with its shoes.
You also hear that SPD-SLs are better for power transfer due to the larger contact patch, but I've never been able to find any actual data to support this.
#15
Senior Member
Join Date: Mar 2015
Posts: 322
Bikes: 2014 Focus Mares AX 2.0, 2019 Cube Litening C:62 Race Disc Teamline
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 121 Post(s)
Likes: 0
Liked 140 Times
in
68 Posts
I'm running xc701 shimanos with 8020 XT pedals on my roadie and commuter and see no reason to move to spd-sl. No issues at all. Always a hoot watching my roadie mates ice skating around at the wet cafe stops
#16
Junior Member
Join Date: Oct 2006
Posts: 172
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Liked 157 Times
in
55 Posts
I used to ride in SPD mounted on Sidi shoes. They were OK. Then I changed to the Look system and never looked back (pun intended). Much better feel for power transfer.
#17
Full Member
Join Date: Jul 2007
Location: SF Bay Area
Posts: 242
Bikes: 2020 Pinarello Dogma F12 Disc (Enve SES 3.4), 2021 S-Works Aethos (Roval Alpinist CLX II), 2024 Topstone Lab71 (Terra CLX II), 2006 Cervelo Soloist (10 speed Ultegra), 2021 S-Works Epic
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Liked 74 Times
in
34 Posts
I guess I'll be the voice of dissent, having ridden mountain bike pedals on the road (and on the mountain) for many years. SPDs are great because they are simple and easy to get into and out of. I still use them on both my mountain bikes, as do most of the kids on the high school MTB team I coach. I used them for road riding for 3-4 years before I switched over to dedicated road shoes and pedals in 2010. I find the power transfer and stability to be much greater with dedicated road shoes and cleats. I've been using Speedplay pedals on multiple bikes for about 10 years. With SPDs, I don't like how my foot moves all over the place when pedaling steady on the road. Are dedicated road shoes and pedals a must-have? No. Are they better than MTB cleats and shoes? For me, they are. I find Speedplay's walkable cleats to be usable enough, but I don't spend a ton of time walking when I'm wearing them. Maybe to stop at a cafe for lunch or something like that, but I don't go hiking in them or for long walks.
#18
Full Member
Speedplay Frog or SPD (moutain bike pedals). Much much much easier to clip back into than road pedals with plastic cleats. No down sides with good shoes (Shimano XC5 )