Large Cannondale
10-20-19, 03:03 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Calgary
Posts: 665
Bikes: Condor, Cinelli SC, MKM Metcalfe, Peugeot AE08, Bianchi, Cougar, Miyata, Harry Hall, Holdsworth Special, Raleigh Int'l, Le Croco, Bob Jackson, Zeus
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 102 Times
in
53 Posts
Large Cannondale
Just picked up this Cannondale. It's far too large for me so will move it on but I need some help to identify what the model and age are. And thoughts on value?
I don't see any serial numbers on it or decals beyond the Cannondale one.
It seems to be in decent shape but needs a thorough cleaning and replacement of consumables.
The ST is 61cm CTC, top tube is 59 cm ctc. Rear spacing is 126 mm.
Most components are Shimano Tricolour, 8 speed 6400. FD is Duraace. Seat post is slammed but it comes out and is tricolour. Bar and stem are 3TTT. Headset is Stronglight.
Thanks.
Brad
Cannondale by BJ Stevens, on Flickr
Cannondale by BJ Stevens, on Flickr
Cannondale by BJ Stevens, on Flickr
I don't see any serial numbers on it or decals beyond the Cannondale one.
It seems to be in decent shape but needs a thorough cleaning and replacement of consumables.
The ST is 61cm CTC, top tube is 59 cm ctc. Rear spacing is 126 mm.
Most components are Shimano Tricolour, 8 speed 6400. FD is Duraace. Seat post is slammed but it comes out and is tricolour. Bar and stem are 3TTT. Headset is Stronglight.
Thanks.
Brad
Cannondale by BJ Stevens, on Flickr
Cannondale by BJ Stevens, on Flickr
Cannondale by BJ Stevens, on Flickr
__________________
Better bike .. Better life!
Better bike .. Better life!
11-23-19, 07:30 AM
#2
Senior Member
Join Date: Sep 2019
Location: NPR, Florida
Posts: 83
Bikes: 1984~85 Raleigh Competition, 1985 Raleigh Super Course, 2013 Raleigh Revenio 2.0
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 35 Times
in
23 Posts
Looks a lot like a 1996 R2000 based on the cantilevered rear dropouts and the quill stem, but it would've had full dura Ace components. The serial number should be visible on the bottom bracket. Is it a matte finish?
