Beginner questions on brazing equiptment - Part 4, Lenses
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 0 Times
in
0 Posts
Beginner questions on brazing equiptment - Part 4, Lenses
Lenses
Dan
- What shade lens do you use for brazing steel frame?
- What color lens works best for you?
Dan
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
I use a #3 or #4 green lens for brass and blue Didymium glassblower's glasses for silver.
#3
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 0 Times
in
0 Posts
Thanks again John, and sorry for being a novice - but when you say brass and silver, you're referring to the filler rods?
#4
Senior Member
#5
Senior Member
Join Date: Jan 2013
Location: South Jersey
Posts: 2,266
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 714 Post(s)
Liked 800 Times
in
475 Posts
#5 is way too dark for brazing. I used to use a B3 series glassblowing lens from Wale Apparatus https://www.waleapparatus.com/category/wale-wear when I was fillet brazing. They are a bit pricey, but it makes it easier to see the difference between molten flux and molten brass.
I switched to TIG welding, but I still braze in bridges and braze ons. I usually just use a pair of dark sunglasses for those tasks.
I switched to TIG welding, but I still braze in bridges and braze ons. I usually just use a pair of dark sunglasses for those tasks.
#6
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
#5 is too dark for anything. I use it for gas welding, but even then seeing is tricky. I use a combo #3/ace for everything. Unfortunately, I think that combo isn't available since the last batch failed. I might just order some ACE glasses for silver, the shaded glasses are too dark for my tastes, and I would rather be able to see better for silver. My understanding is that didymium by itself isn't adequate for brass.
#7
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 0 Times
in
0 Posts
#5 is way too dark for brazing. I used to use a B3 series glassblowing lens from Wale Apparatus https://www.waleapparatus.com/category/wale-wear when I was fillet brazing. They are a bit pricey, but it makes it easier to see the difference between molten flux and molten brass.
I switched to TIG welding, but I still braze in bridges and braze ons. I usually just use a pair of dark sunglasses for those tasks.
I switched to TIG welding, but I still braze in bridges and braze ons. I usually just use a pair of dark sunglasses for those tasks.
#8
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,081
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4204 Post(s)
Liked 3,861 Times
in
2,309 Posts
I'm using currently Phillips 202s glass blowing eye ware currently, partially because they make them in magnifiers and also because they mimic the dydimium glasses I got in 1979 and got use to. I like their ability to change the flux flare and see through it better. Andy
__________________
AndrewRStewart
AndrewRStewart