Campagnolo Mirage rear hub spoke removal
#1
Senior Member
Thread Starter
Campagnolo Mirage rear hub spoke removal
Anyone know how to remove the retaining thingy so I can remove/change the spokes?
Tried prying it off to no avail.
Pry harder?
There's a pin there but seems just that: a pin.
Little help here.
Tried prying it off to no avail.
Pry harder?
There's a pin there but seems just that: a pin.
Little help here.
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
It's a spring clip held in a groove. The rivet (at 12:30 in the photo) is where the clip's ends are. Using a prick/sharpened spoke/knife blade/…, at the closest spoke access cut away to that rivet, pry the clip's end up and past the groove. Then move it outwards so the end falls off the flange. Working the rest of the clip up and over should then be easier. Andy
__________________
AndrewRStewart
AndrewRStewart