What to do with a dented-a** frame...
#1
Climbing: Ropes or Wheels
Thread Starter
Join Date: Jul 2013
Location: Unied States, Maine
Posts: 384
Bikes: 2012 Scott Foil 30, Homebrew Windsor Fens Build, 2015 Fuji Touring, 1980 Univega
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
What to do with a dented-a** frame...
So a brief bit ago I bought a 2008 CAAD8 (to my best guess).
I didn't pay much for it - got it from a friend who was ditching the sport, but the frame is dented. Now when I say dented, I mean DENTED. In the way that I started reading the frame flames inspired by single dents fractions of the size of the numerable dents in this frame. Top tube, seat tube, down tube, and NDS chain stay .
On the other hand, the components make it worth it and I just ebayed a new frame that actually fits too.
The fork off the CAAD is still in good shape... Lord only knows how.
I have no idea what happened to this poor bike. By the paint around the dents, it looks like someone took a rubber hammer to it. w/e. I'm over it by now.
But this leaves me with a frame and nothing to do with it. I figure I'll keep the fork in fear of crits or sell it separately. But does anyone have any thoughts on something creative to do with an old CAAD frame? Or what are the chances anyone on ebay will want a dented-as-b**** 58cm frame?
Pictures for your amusement. No, I am NOT riding this. Calm down.
I didn't pay much for it - got it from a friend who was ditching the sport, but the frame is dented. Now when I say dented, I mean DENTED. In the way that I started reading the frame flames inspired by single dents fractions of the size of the numerable dents in this frame. Top tube, seat tube, down tube, and NDS chain stay .
On the other hand, the components make it worth it and I just ebayed a new frame that actually fits too.
The fork off the CAAD is still in good shape... Lord only knows how.
I have no idea what happened to this poor bike. By the paint around the dents, it looks like someone took a rubber hammer to it. w/e. I'm over it by now.
But this leaves me with a frame and nothing to do with it. I figure I'll keep the fork in fear of crits or sell it separately. But does anyone have any thoughts on something creative to do with an old CAAD frame? Or what are the chances anyone on ebay will want a dented-as-b**** 58cm frame?
Pictures for your amusement. No, I am NOT riding this. Calm down.
#3
In the wind
I was going to say it didn't look too bad, till that last one.
I'd drop it in the recycling bin.
I'd drop it in the recycling bin.
#5
Administrator
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,006
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11975 Post(s)
Liked 6,655 Times
in
3,486 Posts
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#6
Speechless
Join Date: Jun 2011
Location: Central NY
Posts: 8,842
Bikes: Felt Brougham, Lotus Prestige, Cinelli Xperience,
Mentioned: 22 Post(s)
Tagged: 1 Thread(s)
Quoted: 163 Post(s)
Likes: 0
Liked 39 Times
in
16 Posts
I would take a dremel tool and just cut out the bad spots. Since everyone talks about how failure prone dented aluminum is, it will be far stronger with the dents removed.
#9
Senior Member
Join Date: Nov 2013
Location: Southern California
Posts: 1,416
Bikes: 2019 Supersix Evo, 2002 Trek 2000
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 45 Times
in
32 Posts
is your friend abandoning cycling because his wife told him either she goes or the bike does and then proceeded to beat the hell out of the bike with a hammer?
#10
Climbing: Ropes or Wheels
Thread Starter
Join Date: Jul 2013
Location: Unied States, Maine
Posts: 384
Bikes: 2012 Scott Foil 30, Homebrew Windsor Fens Build, 2015 Fuji Touring, 1980 Univega
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Hahaha! No? Sounds like there's a story behind that. We're both climbers as well and he's drifting more towards the rocks than the roads. I did my best to convince him to stay, but alas. One less college kid on a bike unfortunately. Neither of us are married.
#13
Senior Member
Join Date: Sep 2012
Location: Potomac, MD
Posts: 776
Bikes: 2012 GT Transeo 3 2014 Cannondale CAAD 10 105
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#14
Senior Member
Join Date: Jul 2008
Location: Spartanburg, SC, USA
Posts: 255
Bikes: 1983 Fuji Touring Series IV, Masi Volumetrica 3VC
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Aluminum brings just over 50 cents per pound at the metal recycler. If you live close to one, that might just about compensate you for the fuel to take it there. However, bear in mind many states have instituted a licensing requirement to recycle non-ferrous metals, as a way to combat theft.
#16
Administrator
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,006
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11975 Post(s)
Liked 6,655 Times
in
3,486 Posts
Sugar is the devil, artificial or otherwise. Drink water.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#17
Middle-Aged Member
Join Date: Apr 2011
Location: Mesa, AZ
Posts: 2,276
Bikes: Bianchi Infinito CV 2014, TREK HIFI 2011, Argon18 E-116 2013
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Aluminum brings just over 50 cents per pound at the metal recycler. If you live close to one, that might just about compensate you for the fuel to take it there. However, bear in mind many states have instituted a licensing requirement to recycle non-ferrous metals, as a way to combat theft.
#18
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
I drink lots of water. It just has about 1% of dissolved solids in it, the devil and other flavorings. Lot's of people feel as you do, but none of them have ever provided me any convincing evidence of a problem. You are welcome to try. Naturally I am not talking about sugar. That I understand.
By the way, should we expand this disgreement to high fructose corn syrup being worse than natural sucrose or not? I mean why confine ourselves to just one urban myth.
By the way, should we expand this disgreement to high fructose corn syrup being worse than natural sucrose or not? I mean why confine ourselves to just one urban myth.
#19
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
I thought I was the only person still using those pedals.
Let me know if you want to get rid of them.
Let me know if you want to get rid of them.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Last edited by Homebrew01; 05-29-14 at 07:33 PM.
#20
Administrator
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,006
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11975 Post(s)
Liked 6,655 Times
in
3,486 Posts
No thanks, I've seen you beat a dead horse into submission elsewhere. I give. lol
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#22
Aluminium Crusader :-)
Eh, I'd ride it, and obviously keep an eye on dents turning into cracks.
I have the same model (also with a ding in it) and it's fantastic.
I have the same model (also with a ding in it) and it's fantastic.
#25
Senior Member
Join Date: Jul 2007
Posts: 7,570
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 679 Times
in
430 Posts
As long as it's not cracked anywhere, it is perfectly safe to ride.
But, if you ride it a lot, it will eventually crack near those dents. The nice thing about aluminum though is that the cracks develop slowly, so you will see it coming. It's not likely to suddenly fall apart mid ride. (I speak from experience having put a huge dent into the top tube of my old S-Works E5 frameset. I raced it for six more weeks before a crack formed.)
But, if you ride it a lot, it will eventually crack near those dents. The nice thing about aluminum though is that the cracks develop slowly, so you will see it coming. It's not likely to suddenly fall apart mid ride. (I speak from experience having put a huge dent into the top tube of my old S-Works E5 frameset. I raced it for six more weeks before a crack formed.)