Bike racks & uhaul hitches
#1
Senior Member
Thread Starter
Join Date: Oct 2015
Posts: 170
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bike racks & uhaul hitches
Howdy All,
I have been inactive on the site since moving to Jupiter, Florida a few years ago. Been really busy. Have been riding my '72 Lejeune TDF all around the surrounding area. Salt air is wreaking havoc on the chrome parts as well as derailleurs, brake parts, and such. The ride is still great however. 🚴♂️
I have a problem Im sure someone can help me solve. I want to add a two-bike Thule carrier to my 2019 Subaru Forester. Ive heard Uhaul hitches are good and cheaper than other hitches to buy and install. I was wondering has any idea which Uhaul hitch is an appropriate fit for the Subaru? Thanks for any help/advice. 😎
rsterman
I have been inactive on the site since moving to Jupiter, Florida a few years ago. Been really busy. Have been riding my '72 Lejeune TDF all around the surrounding area. Salt air is wreaking havoc on the chrome parts as well as derailleurs, brake parts, and such. The ride is still great however. 🚴♂️
I have a problem Im sure someone can help me solve. I want to add a two-bike Thule carrier to my 2019 Subaru Forester. Ive heard Uhaul hitches are good and cheaper than other hitches to buy and install. I was wondering has any idea which Uhaul hitch is an appropriate fit for the Subaru? Thanks for any help/advice. 😎
rsterman
#2
Senior Member
I have a 2016 Subaru Forester and purchased this Curt Class III (2") hitch from e-trailer and installed it myself. Installation was fairly simple and only took me an hour or so. They have easy to follow videos on the site showing you the install process. I know when I purchased this one it was a little cheaper than the option U-haul had. Although U-haul will do the installation for an extra fee if you want to go that route. Hope that helps!
https://www.etrailer.com/hitch-2019_Subaru_Forester.htm
https://www.etrailer.com/hitch-2019_Subaru_Forester.htm
Likes For WolfgangVerne:
#3
Senior Member
I just bought a hitch mount for my 12 Prius. Bought from etrailer.com and installed myself. Any website you shop on for this should allow you to choose your vehicle to filter for an appropriate mount.
#4
Bicycle Repairman
Here ya go!
https://www.uhaul.com/Trailer-Hitche...eel-Drive/?ddl
Their hitches are inexpensive and some locations will even install them.
I had one on my old Element and it was an easy half hour job to install it while laying on the ground.
My only complaint was that it got rusty pretty quick but I live where there is a lot of road salt in the winter. You shouldn't have an issue like that in Florida...
https://www.uhaul.com/Trailer-Hitche...eel-Drive/?ddl
Their hitches are inexpensive and some locations will even install them.
I had one on my old Element and it was an easy half hour job to install it while laying on the ground.
My only complaint was that it got rusty pretty quick but I live where there is a lot of road salt in the winter. You shouldn't have an issue like that in Florida...
Likes For kingsting:
#5
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
If it's of interest, most Curt hitches are made in the US. Varies by model, however.
#6
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,023 Times
in
665 Posts
I have had good luck with Curt hitches. I don't have a Subaru, so I can't make a comment on specifics of fit and price.
If you can find a class III receiver, (it is 2" square), it is bigger and sturdier than a class I or II (1 - 1/4") receiver. I don't know if that is available for your car.
If you can find a class III receiver, (it is 2" square), it is bigger and sturdier than a class I or II (1 - 1/4") receiver. I don't know if that is available for your car.
#7
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,054
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
Coppi 50K 02 by iabisdb, on Flickr
#8
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,699 Times
in
2,611 Posts
Sorry to hijack, but along with hitches, any recommendations on racks?
#9
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,647
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,702 Times
in
937 Posts
We had one of the Saris "Bones" strap on racks- it was awesome, but it wouldn't work on either of our new cars. When I was looking at racks- I decided I'd get a hitch. I knew Saris was made in Wisconsin. I'd seen all kinds of Saris racks and my decision was pretty much made. Then I started seeing recommendations and reviews for 1Up racks. After seeing plenty of reviews and videos and stuff, I still decided to go with Saris- because it was made in WI. I've had that thing for a year- it's great. But I just found out last month or so that 1UP is made in WI as well. Not that I don't like the Saris- but I think I would have chosen the 1Up if I'd known it was made in WI.
I don't think you'd go wrong with either brand.
BTW- I have a Saris Freedom EX II.
(I need to take some pix of the rack with the bikes on my car- but here's the stock ones)
I don't think you'd go wrong with either brand.
BTW- I have a Saris Freedom EX II.
(I need to take some pix of the rack with the bikes on my car- but here's the stock ones)
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#10
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,647
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,702 Times
in
937 Posts
I have a Curt hitch that I had installed from a local 'automotive accessories' place. My car is an Acura- when I asked them about it- I was referred there.
Hitch 1 by Dave The Golden Boy, on Flickr
Hitch 2 by Dave The Golden Boy, on Flickr
Hitch 1 by Dave The Golden Boy, on Flickr
Hitch 2 by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#11
Senior Member
It depends on the car, too. The uhaul hitch was going to hang down like the car above but I ended up going to a local truck store and they had a hitch that was essentially hidden other than the square for the ball insertion. Similar price.
#12
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 825
Bikes: 1981 Bianchi Specialissim, 1976 Colnago Super. 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 276 Post(s)
Liked 952 Times
in
389 Posts
I've installed Curt 2" hitches on 2 Acura MDX's, a Cayenne, and an Infinity QX60. I would recommend the 2" it gives you way more options they are generally mounted more securely also. As for rack's I really like my Kuat. I keep it as a 2 bike carrier, but can add the extension on if I need to carry up to 4 bike.
Mike
Mike
#13
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,054
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
#15
Junior Member
Join Date: Apr 2016
Location: Dallas
Posts: 132
Bikes: Current Stable: 1973 Mercian Vincitore;1985 CIOCC Designer'84;1988 Raleigh "531c USA" ;1990 LeMond Maillot Jaune Z Team; 1991 Fuji Titanium;1996 Calfee LunaPro-Lemond Z team Tribute Replica; 2013 Wilier Zero.Seven
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 31 Times
in
14 Posts
I got a Curt for my Outback. I tried to order it from etrailer, but their stock was out at the time. I ended up saving ~50 bucks and got it from amazon.
In regards to the type of rack, I have a 1UP rack which is manufactured in Wisconsin, the saris rack is similar to the 1UP, IIRC, 1UP is the original "no contact" bike rack.
One of the nice options with the 1UP is that if you can add "rack add-ons" if you need to carry more than one bike. IIRC the subarus have a fairly low "tongue" weight limit so you might not be able to carry 4 ebikes on the Forester
In regards to the type of rack, I have a 1UP rack which is manufactured in Wisconsin, the saris rack is similar to the 1UP, IIRC, 1UP is the original "no contact" bike rack.
One of the nice options with the 1UP is that if you can add "rack add-ons" if you need to carry more than one bike. IIRC the subarus have a fairly low "tongue" weight limit so you might not be able to carry 4 ebikes on the Forester
Last edited by shoff535; 08-25-20 at 05:37 PM. Reason: more info on bike rack
Likes For shoff535:
#16
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,699 Times
in
2,611 Posts
Seems that the mini-boom for bikes is also affecting the rack sellers. From the 1UP site: All racks and add-ons are out of stock until Aug 26th without the option for backorder.
#17
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,184
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,355 Times
in
717 Posts
Uhaul quoted me 285 + install for my 13" G37 sedan back in 2015. No way did I pay that.
I found one on etrailer for $90 and installed it myself.
Bought a Thule rack
I found one on etrailer for $90 and installed it myself.
Bought a Thule rack
#18
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,023 Times
in
665 Posts
Racks are in short supply right now. I prefer racks with tire trays rather than hanging bikes from the top tube. Kuat, Yakima, Thule, 1-up and Saris all make nice racks. If money was not an issue, the Kuat would be my choice. Money is always an issue and now availability is the other issue.
I have a much less expensive rack made by a company called MaxHaul. It is built like an erector set, it is not as elegant as the brands listed above, but it works perfectly. I have fenders on most of my bikes so this holding system works well for the bikes I carry.
This seems to be the same one. Walmart Hitch mount bike rack
I have a much less expensive rack made by a company called MaxHaul. It is built like an erector set, it is not as elegant as the brands listed above, but it works perfectly. I have fenders on most of my bikes so this holding system works well for the bikes I carry.
This seems to be the same one. Walmart Hitch mount bike rack
#19
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,420
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 531 Post(s)
Liked 1,005 Times
in
514 Posts
Racks are in short supply right now. I prefer racks with tire trays rather than hanging bikes from the top tube. Kuat, Yakima, Thule, 1-up and Saris all make nice racks. If money was not an issue, the Kuat would be my choice. Money is always an issue and now availability is the other issue.
I have a much less expensive rack made by a company called MaxHaul. It is built like an erector set, it is not as elegant as the brands listed above, but it works perfectly. I have fenders on most of my bikes so this holding system works well for the bikes I carry.
This seems to be the same one. Walmart Hitch mount bike rack
I have a much less expensive rack made by a company called MaxHaul. It is built like an erector set, it is not as elegant as the brands listed above, but it works perfectly. I have fenders on most of my bikes so this holding system works well for the bikes I carry.
This seems to be the same one. Walmart Hitch mount bike rack
#20
Senior Member
I have this Rola rack on the way. I need one that can secure with the frame for fendered bikes. Option to add a second holder if I feel the need.
Also, it was in stock.
Also, it was in stock.
#21
Senior Member
I bought a hitch at U-Haul a couple months ago for my 2020 Honda CR-V. It was by far the cheapest place at $189 installed. I purchased a used Yakima 4 bike rack for $80. Pretty inexpensive for the whole setup.
Last edited by rjhammett; 08-26-20 at 09:33 PM.
#22
PeopleCode delaminator
Wife and I had a Draw-Tite 2" hitch put on our Grand Caravan. If you don't have a vehicle lift, you need to take off the rear bumper cover to install the hitch. I didn't want to deal with that so we paid a mechanic to do the install. We have a Thule 4 bike rack that uses stretchy band straps across the top tubes to hold the bikes in cradles on the rack. Super easy to pop the rack in to the hitch and load up the bikes.
#23
Full Member
2009 Forrester was total loss..but bike was OK!
Had a 2" Draw-tite with a Specialized Dolce Al Elite hanging on a $90 Harbor Freight 4-bike hanger. Drove onto a steep bank and down through a deep ditch (and back up and out) after clipping a car turning right from the left lane. Did not roll it, but the Subaru was a total loss while the bike is just fine. And I still haul the bike on the same hanger from my Jeep's 2" Draw-tite hitch.
#24
Senior Member
I have this Rola rack on the way. I need one that can secure with the frame for fendered bikes. Option to add a second holder if I feel the need.
Also, it was in stock.
Also, it was in stock.
#25
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I love my Kόat NV rack. If you've got a hitch, I recommend it.
It has an integrated cable lock for quick stops, and an integrated workstand. I can put the rack on the car, tools free, in about a minute. Bikes are also easy to put on and off. Service is also good. After about a year and a half I had a problem with the lock seizing. I wrote to their customer service for advice and they sent me a replacement. My only complain is that the rack bounces a little going over speed bumps. If you forget to secure the rear wheel (which I do pretty often) the rear wheel can jump off the rack. So far, the front wheel hold has kept the bike on the vehicle, but I've got some chainring gashes on the rack from this kind of incident. Mine is over 5 years old. They may have improved it since then.
It has an integrated cable lock for quick stops, and an integrated workstand. I can put the rack on the car, tools free, in about a minute. Bikes are also easy to put on and off. Service is also good. After about a year and a half I had a problem with the lock seizing. I wrote to their customer service for advice and they sent me a replacement. My only complain is that the rack bounces a little going over speed bumps. If you forget to secure the rear wheel (which I do pretty often) the rear wheel can jump off the rack. So far, the front wheel hold has kept the bike on the vehicle, but I've got some chainring gashes on the rack from this kind of incident. Mine is over 5 years old. They may have improved it since then.
__________________
My Bikes
My Bikes
Likes For Andy_K: