Box Four / Shimano Compatibility
#1
Junior Member
Thread Starter
Box Four / Shimano Compatibility
I converted my used GT Aggressor Expert to a 1x8 and love it. However, the rear shifter won't shift up to the next gear in the middle of the cassette on one click. I have to upshift twice and down once. If I adjust he cable tension, it does the same thing - but on the downshift.
New cable, new chain. Rebuilt the shifter with no change. Clean drivetrain.
The last time this happened (on another bike) , the only fix was a new shifter.
I have hydraulic brakes and don't want the shifter gear window getting in the way of the brakes. I don't need /want it - I never look at it anyway.
Soooo ... long story short (too late!!) is the Box Four 8 speed shifter compatible with my Shimano rear mech?
New cable, new chain. Rebuilt the shifter with no change. Clean drivetrain.
The last time this happened (on another bike) , the only fix was a new shifter.
I have hydraulic brakes and don't want the shifter gear window getting in the way of the brakes. I don't need /want it - I never look at it anyway.
Soooo ... long story short (too late!!) is the Box Four 8 speed shifter compatible with my Shimano rear mech?
#2
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,624
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2976 Post(s)
Liked 1,182 Times
in
771 Posts
No.
It's amazing what you can find on the manufacturers website.
https://boxcomponents.com/products/b...shift-groupset
It's amazing what you can find on the manufacturers website.
https://boxcomponents.com/products/b...shift-groupset
#3
Junior Member
Thread Starter
Thanks prj71...
I know manufacturer's "say" something doesn't work - but sometimes they do. I was just wondering if anyone had every tried it.
I'm having difficulty finding an 8 speed Shimano shifter (without the window) that doesn't cost more than the bike.
I know manufacturer's "say" something doesn't work - but sometimes they do. I was just wondering if anyone had every tried it.
I'm having difficulty finding an 8 speed Shimano shifter (without the window) that doesn't cost more than the bike.
#4
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
8 speed Shimano is going slowly away... I think they are down to only EZ-Fires and one shifter pod, and the different part numbers are just different finishes for different groupsets.
That said, the indicator should not interfere with the brake lever. The pod sits below the brake perch and the indicator goes through the gap between the master cylinder and handlebar. This is not 8 speed nor hydraulic, but you get the idea:
That said, the indicator should not interfere with the brake lever. The pod sits below the brake perch and the indicator goes through the gap between the master cylinder and handlebar. This is not 8 speed nor hydraulic, but you get the idea:
__________________
Genesis 49:16-17
Genesis 49:16-17
Last edited by Darth Lefty; 01-11-21 at 08:22 PM.
#5
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
You can get an Altus M310 or Acera M315 RapidFire Plus shifter that will work fine. They do have gear windows, but if appearance is that important, then you’ll have to pay for it with a shifter from the 90’s.
John
John
Likes For 70sSanO:
#7
Junior Member
Thread Starter
#8
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
#9
Junior Member
Thread Starter
I just switched it from that way. When I did, I had to use my middle finger on the brake lever. It was too close to use my first finger. If I move it further away, I have difficulty reaching the shifter levers.