What have you been wrenching on lately?
#3176
Senior Member
Join Date: Feb 2011
Location: adelaide, australia
Posts: 2,798
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 227 Post(s)
Liked 388 Times
in
149 Posts
I've been adding components today to my smelly old hybrid to awesome gravel bike conversion. I think it's looking good but now just waiting on things like the seat, bars, tape, chain and cables to arrive that are in the post.
Likes For jbchybridrider:
#3177
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,185
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
Last summer I used my freshly overhauled 87 Schwinn Voyageur to travel the Great Allegheny Passage. 300 miles of decent gravel and screenings, largely dry but some rain and all rain the last day, 25 miles. After I got home I found the pedals acted funny so overhauled them finding rust on the crank end of the spindle. The wheels and BB sounded fine so I put that off. Recently I got to thinking it was time to be sure of the other bearings. I overhauled the two hubs and am happy to report they were fine. No water nor crud got past the Millaird labyrinthine "seals". Impressive, really. Now fresh grease and back on the bike. I then opened the BB and found, again no water intrusion, no rust. But pretty dirty. More good news - the accordion sleeve I included in the BB did it's job well. The bearings were fine but outside the sleeve was considerable gritty crud. Must have gotten between the spindle and the cups. But did not get to the balls. Ok. I've replaced all that with a sealed unit though. It was about time. "The mule" is ready for more adventure.
Likes For Prowler:
Likes For VtwinVince:
#3180
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,771
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2433 Post(s)
Liked 3,106 Times
in
1,956 Posts
What kind of hubs are those?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#3181
Senior Member
Join Date: Aug 2015
Location: Murrieta Ca.
Posts: 537
Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 623 Times
in
245 Posts
The hubs are Suzue Classica 10 speed, 440 grams for the pair. The skewers are from Paul Component Engineering. 3Rensho's claim to fame is frames for Japanese Keirin racing, Suzue manufactures professional Keirin hubs, the road hubs are visually similar to the professional parts. For this build I am using as many NJS stamped parts as possible, such as the Nitto NJS Pearl stem, Nitto Jaguar NJ-SP72 seatpost, and MKS Custom Nuevo NJS track pedals. The NJS parts are sort of a "kink" for me as there is no real advantage to using them.
: Mike
: Mike
__________________
Booyah Hubba-Hubba!!!
Booyah Hubba-Hubba!!!
Likes For Nemosengineer:
#3182
Senior Member
Join Date: Nov 2013
Location: Southern California
Posts: 1,453
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 746 Times
in
407 Posts
They're very pretty (and shiny), that's advantage enough.
I recently finished up my Miyata 1200 for the foreseeable future. These cranks were originally intended for a different bike, but it turns out said bike is better off with a triple rather than a double. So I decided to pop em onto the Miyata for fun, and to finish up the Suntour Vx groupset. Which was never intended, it sorta just happened on its own. All I need now is a Vx bottom bracket that isn't beat to hell and overpriced...
I do like the patina that has developed on the crane suzue bell; fits the frame and tires nicely.
I recently finished up my Miyata 1200 for the foreseeable future. These cranks were originally intended for a different bike, but it turns out said bike is better off with a triple rather than a double. So I decided to pop em onto the Miyata for fun, and to finish up the Suntour Vx groupset. Which was never intended, it sorta just happened on its own. All I need now is a Vx bottom bracket that isn't beat to hell and overpriced...
I do like the patina that has developed on the crane suzue bell; fits the frame and tires nicely.
Likes For Piff:
#3183
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,771
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2433 Post(s)
Liked 3,106 Times
in
1,956 Posts
The hubs are Suzue Classica 10 speed, 440 grams for the pair. The skewers are from Paul Component Engineering. 3Rensho's claim to fame is frames for Japanese Keirin racing, Suzue manufactures professional Keirin hubs, the road hubs are visually similar to the professional parts. For this build I am using as many NJS stamped parts as possible, such as the Nitto NJS Pearl stem, Nitto Jaguar NJ-SP72 seatpost, and MKS Custom Nuevo NJS track pedals. The NJS parts are sort of a "kink" for me as there is no real advantage to using them.
: Mike
: Mike
Very neat looking. And pricey! Eek!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#3185
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,771
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2433 Post(s)
Liked 3,106 Times
in
1,956 Posts
I need RJ the Bike Guy to visit my garage at the moment...I hate stuck seat posts...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For 2cam16:
#3187
Senior Member
Just finished going through this DB Fleet Streak. This thing is a tank. As in hi ten. Found during community clean up days last year.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
#3188
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
2cam,
Nice job! Must have been a bunch of work. Smiles, MH
Nice job! Must have been a bunch of work. Smiles, MH
Likes For Mad Honk:
#3189
Senior Member
Saved from the junk pile. Installed new tubes, rebuilt the front wheel and headset and have started a general cleanup. I’ll take it on a short spin tomorrow morning to see how I like the single speed setup and make some decisions.
Kind of hate it when something picked up cheap with an idea about harvesting parts starts to look like a potential full rehab project (++ $) !
A few nice original bits left on this one
Kind of hate it when something picked up cheap with an idea about harvesting parts starts to look like a potential full rehab project (++ $) !
A few nice original bits left on this one
#3190
Senior Member
Join Date: Aug 2014
Location: Budapest, Hungary
Posts: 50
Bikes: Steyr Waffenrad ('52, '62, '71, '72, '74), Cannondale (Saeco CAAD4, Criterium), Bianchi (Martini Racing mtb, RC SBX "weird"), Burco (transport, speciaal opa)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Liked 19 Times
in
11 Posts
Nice bike!
#3191
Member
My Gary revisited...
Lots of rain here in southern Florida. Getting this bike finally going again and taking test rides in between the raindrops. Making a sidewalk pounder and a gravel grinder out of my beloved 2006 Gary Fisher Marlin.
Likes For JimmyFish:
#3192
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,156
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 246 Post(s)
Liked 331 Times
in
192 Posts
Well I excitedly wanted to share what I have been working on the last couple days but my phone has completely died.
That said I had a spare wheel with a bad Apex rim, but I have a Mavic CP22 that was almost the same shape and size, so I taped the rims together and started transferring spokes over. All went well but I found out that somehow in the move to Tennessee the brand new Mavic rim that I have probably held onto 10+ years had developed a pretty serious hop in it.
But I still built a wheel, been probably 5 years since the last time, and the rim is pretty dang straight minus the hop. I was able to almost *indicating with hands small space* get the hop out, but it's good to ride. I took it on a 5 mile shake down and no movement and no popping noises.
Anyway, now to get a little more serious, I've got a MTB rear wheel to do next but needs spokes for it. Still low stakes, I have plenty of WTB LaserBeam rims to replace with, then I have a couple of nicer wheels to build, so at least one more practice. Then a nice rear MTB wheel, and then a 36h matched pair of 105 hubs with Mavic MA3 Rims, all still new. Anyway, a built wheel feels definitely like an accomplishment every time it works out.
That said I had a spare wheel with a bad Apex rim, but I have a Mavic CP22 that was almost the same shape and size, so I taped the rims together and started transferring spokes over. All went well but I found out that somehow in the move to Tennessee the brand new Mavic rim that I have probably held onto 10+ years had developed a pretty serious hop in it.
But I still built a wheel, been probably 5 years since the last time, and the rim is pretty dang straight minus the hop. I was able to almost *indicating with hands small space* get the hop out, but it's good to ride. I took it on a 5 mile shake down and no movement and no popping noises.
Anyway, now to get a little more serious, I've got a MTB rear wheel to do next but needs spokes for it. Still low stakes, I have plenty of WTB LaserBeam rims to replace with, then I have a couple of nicer wheels to build, so at least one more practice. Then a nice rear MTB wheel, and then a 36h matched pair of 105 hubs with Mavic MA3 Rims, all still new. Anyway, a built wheel feels definitely like an accomplishment every time it works out.
#3193
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
Matt,
I break down a lot of wheels to scrap from my local co-op. Most of those take a 260mm length spoke set. If you get spoke lengths from UBI or somewhere I can likely send you set of used stainless for cost of shipping. PM me. I only keep the stainless steel spokes as the others are almost ready to rust out. lemme know, MH
I break down a lot of wheels to scrap from my local co-op. Most of those take a 260mm length spoke set. If you get spoke lengths from UBI or somewhere I can likely send you set of used stainless for cost of shipping. PM me. I only keep the stainless steel spokes as the others are almost ready to rust out. lemme know, MH
Likes For Mad Honk:
#3194
aka: Mike J.
I picked this up yesterday to fix and sell. Spent about an hour or two on it last night just fixing major issues and hodgepodging it enough to get it ridable. Not sure yet how far I’ll go on it. Currently has 3x6 gearing and I’ve got some 8-speed wheels and shifters in the garage, I might even look at drop-baring it. Don’t know yet. It does kind of have a Miami Vice vibe to the bike.
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
Likes For treebound:
Likes For deux jambes:
#3197
aka: Mike J.
#3198
Master Parts Rearranger
Join Date: Mar 2015
Location: Portlandia's Kuiper Belt, OR
Posts: 4,402
Bikes: 1982 Trek 720 - 1985 Trek 620 - 1984 Trek 620 - 1980 Trek 510 - Other luminaries past and present
Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1556 Post(s)
Liked 2,024 Times
in
989 Posts
My apartment is a bike zoo presently. I went from zero 27" wheels to FIVE 27" wheels in just four days. Part of it was the taking in of a bike that is in the family (in-laws) and staying at my parents' place. Seven years ago when my brother and his then girlfriend were dating, I had seen this '83 Schwinn Super Le Tour hanging upside down in her grandparents' basement. Black with chrome. Looked nice. Well, it's still in the family, even if there was a semi-gifting to me (yet conditional upon it fitting which it doesn't as it is too small) a couple of years ago, well into my involvement with vintage bikes and bikes in general.
Anyway, it's high time the bike received some TLC from our family's lone bike super nerd (yours truly). So I hauled it up north three hours and got up close and personal with it. Well....wow. Lots of stuff wrong or neglected or not done correctly. A lot right, though, thankfully. So I'm on the other side of the valley on that. Just need to cable things and likely snag a new chain. I found some matching-enough 700C wheels for free and am using them instead of the original 27" wheels (for a number of reasons). Grand Bois Cypress tires that I have lying around and a new BB-UN55 to future proof things a bit more. Trying to thread the needle of doing right by a family/in-law bike and not spending a ton of money. I think I'm doing alright. The bike will hang at my parents' place mostly, with excursions when a big group of us get together and someone just needs a (58cm) bike. It looks like a mini version of my '74 Paramount, at a mere fraction of the cost, but of a multiple of frustration/annoyance (21.15mm stem standard, anyone???).
The bike will be safe again, finally, with some solid new (free!) parts that have been overhauled and will be good to go for many years.
Once I'm done with the Super Le Tour, it's on to the Paramount to get it's new new spokes for the front wheel. The right length... After that it will be Battaglin Test Ride & Decide, then work on my just-acquired '83 Specialized Expedition. I am scheming some plans for this bike, but they will be predicated upon my riding of it. Catch and release? Or go whole hog and set the cantis wider, add DT shifter bosses, and powder coat (paint is a bit worn). Lots to do and to think about.
Anyway, it's high time the bike received some TLC from our family's lone bike super nerd (yours truly). So I hauled it up north three hours and got up close and personal with it. Well....wow. Lots of stuff wrong or neglected or not done correctly. A lot right, though, thankfully. So I'm on the other side of the valley on that. Just need to cable things and likely snag a new chain. I found some matching-enough 700C wheels for free and am using them instead of the original 27" wheels (for a number of reasons). Grand Bois Cypress tires that I have lying around and a new BB-UN55 to future proof things a bit more. Trying to thread the needle of doing right by a family/in-law bike and not spending a ton of money. I think I'm doing alright. The bike will hang at my parents' place mostly, with excursions when a big group of us get together and someone just needs a (58cm) bike. It looks like a mini version of my '74 Paramount, at a mere fraction of the cost, but of a multiple of frustration/annoyance (21.15mm stem standard, anyone???).
The bike will be safe again, finally, with some solid new (free!) parts that have been overhauled and will be good to go for many years.
Once I'm done with the Super Le Tour, it's on to the Paramount to get it's new new spokes for the front wheel. The right length... After that it will be Battaglin Test Ride & Decide, then work on my just-acquired '83 Specialized Expedition. I am scheming some plans for this bike, but they will be predicated upon my riding of it. Catch and release? Or go whole hog and set the cantis wider, add DT shifter bosses, and powder coat (paint is a bit worn). Lots to do and to think about.
#3199
Senior Member
Join Date: Oct 2016
Location: Cambridge UK
Posts: 852
Bikes: 1903 24 spd Sunbeam, 1927 Humber, 3 1930 Raleighs, 2 1940s Sunbeams, 2 1940s Raleighs, Rudge, 1950s Robin Hood, 1958 Claud Butler, 2 1973 Colnago Supers, Eddie Merckx, 2 1980 Holdsworth, EG Bates funny TT bike, another 6 or so 1990s bikes
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 332 Times
in
185 Posts
Wheel building takes me ages.
Respoked 1903 rim with a K3 Strumey Archer 3 speed hub.
This is the original Bayliss Wiley hub and single speed free wheel block. Both still as smooth a silk.
This is the K3 Strumey Archer 3 speed that replaced the BW setup above.
Likes For Johno59:
#3200
aka: Mike J.
Well, that didn’t last long, the Scott mtb with the salmon and yellow colors is now someone’s new 4H project.
And, well, never say never.
I’ve been telling myself no more 27” wheeled road bikes, yeah, uh huh, I don’t listen well.
Latest project is a 10 speed Made in Belgium Browning complete with Simplex derailleurs.
Needs tires and a saddle at a minimum.
N-1+1 🤷🏻♂️
And, well, never say never.
I’ve been telling myself no more 27” wheeled road bikes, yeah, uh huh, I don’t listen well.
Latest project is a 10 speed Made in Belgium Browning complete with Simplex derailleurs.
Needs tires and a saddle at a minimum.
N-1+1 🤷🏻♂️
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
Likes For treebound: