Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Cassette sizing

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Cassette sizing

Old 08-19-19, 09:48 AM
  #1  
Princess_Allez
Senior Member
Thread Starter
 
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times in 40 Posts
Cassette sizing

I currently have an 11-28 cassette on a compact Shimano r7000 105 (50-34). I'm wanting to move to a cassette with a larger rear cog. What can I upsize to without requiring a new chain?
Princess_Allez is offline  
Old 08-19-19, 09:51 AM
  #2  
ksryder
Senior Member
 
Join Date: May 2014
Posts: 2,549

Bikes: yes

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times in 329 Posts
Originally Posted by Princess_Allez
I currently have an 11-28 cassette on a compact Shimano r7000 105 (50-34). I'm wanting to move to a cassette with a larger rear cog. What can I upsize to without requiring a new chain?
Nothing. The bigger cogs will mandate a longer chain.

You need the rear derailleur with the medium cage to handle a 32 or 34-tooth cassette, fyi. Shimano claims that it maxes out at 34t.
ksryder is offline  
Old 08-19-19, 10:08 AM
  #3  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Yeah, assuming that the chain was properly sized in the first place, you not going to be able to go bigger without a new chain. There is a chance that it wasn't properly sized, though; shift to your big/big and look at your RD - it should be stretched forward with some, but not a lot, of bend at the elbow. If there's a lot of bend, you might have a couple extra chain links to play with.
WhyFi is offline  
Old 08-19-19, 10:13 AM
  #4  
alcjphil
Senior Member
 
alcjphil's Avatar
 
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,869
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1792 Post(s)
Liked 1,671 Times in 955 Posts
How old is your current chain? Unless it is almost new it is never a good idea to install a new cassette without changing the chain as well
alcjphil is offline  
Likes For alcjphil:
Old 08-19-19, 10:18 AM
  #5  
redlude97
Senior Member
 
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times in 173 Posts
Originally Posted by WhyFi
Yeah, assuming that the chain was properly sized in the first place, you not going to be able to go bigger without a new chain. There is a chance that it wasn't properly sized, though; shift to your big/big and look at your RD - it should be stretched forward with some, but not a lot, of bend at the elbow. If there's a lot of bend, you might have a couple extra chain links to play with.
There is nothing improper about sizing a chain using the longest chain method of small+small w/o slack as long as you are within the capacity limits of the RD
redlude97 is offline  
Old 08-19-19, 10:27 AM
  #6  
ksryder
Senior Member
 
Join Date: May 2014
Posts: 2,549

Bikes: yes

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times in 329 Posts
Originally Posted by redlude97
There is nothing improper about sizing a chain using the longest chain method of small+small w/o slack as long as you are within the capacity limits of the RD
That's... not what he said.
ksryder is offline  
Likes For ksryder:
Old 08-19-19, 10:29 AM
  #7  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Originally Posted by redlude97
There is nothing improper about sizing a chain using the longest chain method of small+small w/o slack as long as you are within the capacity limits of the RD
We're in Road. We're weenies. It's improper to weenies.

Originally Posted by ksryder
That's... not what he said.
This is also true.
WhyFi is offline  
Old 08-19-19, 10:33 AM
  #8  
redlude97
Senior Member
 
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times in 173 Posts
Originally Posted by ksryder
That's... not what he said.
He said that assuming it is properly sized, that you wouldn't be able to go larger without a new chain, with an r7000 SS that has a capacity for a 11-30, a chain sized using small+small would work for anything from an 11-25 to an 11-30 without needing the length to be changed. Since the OP is using an 11-28, if the chain was sized using this method then they could go to 11-30 without changing their chain
redlude97 is offline  
Old 08-19-19, 10:34 AM
  #9  
redlude97
Senior Member
 
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times in 173 Posts
Originally Posted by WhyFi
We're in Road. We're weenies. It's improper to weenies.
I know campy makes gravel equipment now but they are still primarily road. Is their chain sizing method not appropriate?
redlude97 is offline  
Old 08-19-19, 10:38 AM
  #10  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Originally Posted by redlude97
I know campy makes gravel equipment now but they are still primarily road. Is their chain sizing method not appropriate?
Campy? What's that?
WhyFi is offline  
Old 08-19-19, 11:01 AM
  #11  
Princess_Allez
Senior Member
Thread Starter
 
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times in 40 Posts
The drivetrain is all fairly new. It has ~1500 miles on it. It's all the factory stuff that came on my 2018 Specialized Allez Sprint.

So the takeaway here is that I can go 11-30 without changing chain or rear mech, but if I want to go 32 or 34, then it would require a new chain and mech?
Princess_Allez is offline  
Old 08-19-19, 11:20 AM
  #12  
redlude97
Senior Member
 
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times in 173 Posts
Originally Posted by Princess_Allez
The drivetrain is all fairly new. It has ~1500 miles on it. It's all the factory stuff that came on my 2018 Specialized Allez Sprint.

So the takeaway here is that I can go 11-30 without changing chain or rear mech, but if I want to go 32 or 34, then it would require a new chain and mech?
The takeaway is that we don't know how the chain was sized originally because there are a few different ways to correctly size a chain. Since it is a KMC chain you can test it easily by installing the new cassette and wrapping the chain around the big front cog and big rear cog and see how much excess chain there is for your desired cassette. The rear mech is generally conservative so an 11-32 should work fine on a short cage mech and possibly even the 11-34.
redlude97 is offline  
Old 08-19-19, 11:22 AM
  #13  
Litespud
Senior Member
 
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683

Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times in 446 Posts
Originally Posted by Princess_Allez
The drivetrain is all fairly new. It has ~1500 miles on it. It's all the factory stuff that came on my 2018 Specialized Allez Sprint.
So the takeaway here is that I can go 11-30 without changing chain or rear mech, but if I want to go 32 or 34, then it would require a new chain and mech?
That's not quite what was said. Given that we don't know how your current chain length was measured, your drivetrain might be at its limit with your current 28 sprocket. A 30 sprocket will be within the chain wrap capacity of your current RD, so you know that you're not going to need a new RD if your switch cassettes, but again - this is a separate issue from chain length, which is the one individual variable about which we know nothing. You will not need a new RD, and you may not need new chain. Easiest thing to do is put your drivetrain on large/large and confirm that your RD is not at its limit. If it still has a bit more forward travel, you likely will get away with your current chain
Litespud is offline  
Old 08-19-19, 11:27 AM
  #14  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Originally Posted by Princess_Allez
So the takeaway here is that I can go 11-30 without changing chain or rear mech,
Maybe, but not likely. The most common sizing method for road, and what Shimano recommends, is big/big + 2; this would leave your chain too short for the additional teeth.

Originally Posted by Princess_Allez
but if I want to go 32 or 34, then it would require a new chain and mech?
Most likely yes on the new chain, not necessarily on the new RD - I haven't tried it, but many people seem to get on just fine when exceeding Shimano's largest cog spec by two teeth (check to see what the official spec is). Alternatively, you might be able to use something like a Wolftooth Road Link as long as the RD can handle the wrap.
WhyFi is offline  
Old 08-19-19, 11:36 AM
  #15  
Atlas Shrugged
Senior Member
 
Join Date: Mar 2010
Posts: 1,629
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1217 Post(s)
Liked 1,281 Times in 653 Posts
Regarding chain length sometimes you get lucky. I wanted a more robust spare wheelset and run easier gearing on my Dura-Ace Di2 Roubaix and was able to handle an 11-32 cassette without changing the chain even though the bike was supplied with 11-30. I found this online tool helps with approximating chain length.
Javascript Bicycle Chain Length Calculator
Atlas Shrugged is online now  
Old 08-19-19, 11:56 AM
  #16  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,083

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,946 Times in 936 Posts
It cost me $400 to upgrade from a short cage 11-28 drivetrain to an Ultegra 8000 long cage RD, 11-34 cassette and chain installed by my LBS.

IMHO, worth the extra $ to have a finely tuned drivetrain.
CAT7RDR is offline  
Old 08-19-19, 12:02 PM
  #17  
Princess_Allez
Senior Member
Thread Starter
 
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times in 40 Posts
Thanks for all the help, guys. My next question: is it even worth it to try such an incremental change, or should try a 32 or 34 first? I feel like I'm exerting too much energy powering up any grade >6%. I see guys on 34-36 having an easier time at it. I want to change my cassette not because I want to keep up with the Jones', but because my legs feel exhausted by the time I plateau.

Last edited by Princess_Allez; 08-19-19 at 12:27 PM.
Princess_Allez is offline  
Old 08-19-19, 12:08 PM
  #18  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,083

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,946 Times in 936 Posts
You answered your own question.

I have been able to complete several long ascent bucket list rides because of the 11-34 cassette offering 27, 30 and 34 cogs with my 34 chain ring. Sometimes you need the climbing cogs to 'rest' the legs. I was really fatigued always grinding in the 25, 28 cogs.
CAT7RDR is offline  
Old 08-19-19, 12:32 PM
  #19  
Princess_Allez
Senior Member
Thread Starter
 
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times in 40 Posts
Originally Posted by CAT7RDR
You answered your own question.

I have been able to complete several long ascent bucket list rides because of the 11-34 cassette offering 27, 30 and 34 cogs with my 34 chain ring. Sometimes you need the climbing cogs to 'rest' the legs. I was really fatigued always grinding in the 25, 28 cogs.
I guess I did ...looks like I'll need a new chain, mech and cassette...

It's called a "long cage" mech, right?

Last edited by Princess_Allez; 08-19-19 at 01:47 PM.
Princess_Allez is offline  
Old 08-19-19, 12:34 PM
  #20  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by Princess_Allez
The drivetrain is all fairly new. It has ~1500 miles on it. It's all the factory stuff that came on my 2018 Specialized Allez Sprint.

So the takeaway here is that I can go 11-30 without changing chain or rear mech, but if I want to go 32 or 34, then it would require a new chain and mech?
I wore out a chain in about 1500 miles a few years ago. Chains are cheap enough that it's a no-brainer to get a new one when you buy a different cassette. You could always put the old one in a baggie and save it in case you ever want to put the old cassette back on.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 08-19-19, 01:01 PM
  #21  
redlude97
Senior Member
 
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times in 173 Posts
Originally Posted by Princess_Allez
I guess I did ...looks like I'll need a new chain, mech and cassette...

It's calles a "long cage" mech, right?
GS, but I'd try it with the mech on there already.
redlude97 is offline  
Old 08-19-19, 01:46 PM
  #22  
colnago62
Senior Member
 
Join Date: Aug 2014
Posts: 2,433
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 412 Times in 230 Posts
Originally Posted by redlude97
He said that assuming it is properly sized, that you wouldn't be able to go larger without a new chain, with an r7000 SS that has a capacity for a 11-30, a chain sized using small+small would work for anything from an 11-25 to an 11-30 without needing the length to be changed. Since the OP is using an 11-28, if the chain was sized using this method then they could go to 11-30 without changing their chain
This is how I understand it.
colnago62 is offline  
Old 08-19-19, 01:52 PM
  #23  
colnago62
Senior Member
 
Join Date: Aug 2014
Posts: 2,433
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 412 Times in 230 Posts
Originally Posted by WhyFi
Maybe, but not likely. The most common sizing method for road, and what Shimano recommends, is big/big + 2; this would leave your chain too short for the additional teeth.



Most likely yes on the new chain, not necessarily on the new RD - I haven't tried it, but many people seem to get on just fine when exceeding Shimano's largest cog spec by two teeth (check to see what the official spec is). Alternatively, you might be able to use something like a Wolftooth Road Link as long as the RD can handle the wrap.
I have 9000 and ride 11-32 cassette on it. I ride a Trek and they seem to have long hangers. Giants do also.
colnago62 is offline  
Old 08-19-19, 02:46 PM
  #24  
aspalmat
Newbie
 
Join Date: Jul 2018
Posts: 66
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Liked 19 Times in 12 Posts
Originally Posted by Princess_Allez
I currently have an 11-28 cassette on a compact Shimano r7000 105 (50-34). I'm wanting to move to a cassette with a larger rear cog. What can I upsize to without requiring a new chain?
I ride a 2018 Trek Domane AL3. It came with a 11-28 rear cassette, with Shimano Sora 9 speed group set. I installed a 11-32, 9 speed cassette on the rear, and have been riding for a year now without a new chain. Seems to work fine for me. And I do occasionally go big/big. Never had an issue.
aspalmat is offline  
Old 08-19-19, 03:38 PM
  #25  
Princess_Allez
Senior Member
Thread Starter
 
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times in 40 Posts
Originally Posted by aspalmat
I ride a 2018 Trek Domane AL3. It came with a 11-28 rear cassette, with Shimano Sora 9 speed group set. I installed a 11-32, 9 speed cassette on the rear, and have been riding for a year now without a new chain. Seems to work fine for me. And I do occasionally go big/big. Never had an issue.
Good to hear. I've been told to avoid cross-chaining, so I avoid going big-big, small-small and the next up/down combination. This essentially makes the bike a 16-speed instead of 22; go figure
Princess_Allez is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.