Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Bb type

Old 07-22-19, 02:32 PM
  #1  
thehammerdog
Senior Member
Thread Starter
 
thehammerdog's Avatar
 
Join Date: Dec 2007
Location: NWNJ
Posts: 3,704

Bikes: Road bike is a Carbon Bianchi C2C & Grandis (1980's), Gary Fisher Mt Bike, Trek Tandem & Mongoose SS MTB circa 1992.

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 722 Post(s)
Liked 353 Times in 226 Posts
Bb type

I want to upgrade my old Crankset and BB but not sure how to determine what I currently have. I know there is now a half dozen sizes and styles so what is the trick?
2007/2008 Bianchi c2c 928 FSA gossamer with external BB cups
thehammerdog is offline  
Old 07-22-19, 02:58 PM
  #2  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Best bet is to pull it apart and ID the actual bottom bracket parts.

My guess is that this bike comes with an english threaded BSA bottom bracket shell. Almost certainly if it is 10 speed.


-Tim-
TimothyH is offline  
Old 07-22-19, 03:23 PM
  #3  
Eggman84
Full Member
 
Join Date: Nov 2016
Location: SoCal
Posts: 489

Bikes: 2014 Bruce Gordon Rock&Road, 1995 Santana Visa Tandem, 1990 Trek 520, 2012 Surly LHT

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Likes: 0
Liked 43 Times in 35 Posts
Originally Posted by thehammerdog
2007/2008 Bianchi c2c 928 FSA gossamer with external BB cups
You have a 2007/2008 FSA Gossamer crankset with external BB cups. Most likely a 68mm BSA threaded BB shell. Suggest you remove the crankset and one of the cups to verify. Should not take but 10 or so minutes assuming you have the tools. If you don't have the tools, take it to your LBS and they will properly identify what you have and make some recommendations on replacement. Finally, inquiring minds want to know why you are wanting a new crankset.
Eggman84 is offline  
Old 07-22-19, 03:24 PM
  #4  
ksryder
Senior Member
 
Join Date: May 2014
Posts: 2,549

Bikes: yes

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times in 329 Posts
It's an FSA Gossamer-- I think that pretty much explains why he wants to upgrade.
ksryder is offline  
Likes For ksryder:
Old 07-22-19, 03:40 PM
  #5  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times in 3,262 Posts
I'd agree it's probably english threaded BSA. So that means it's 1.37inches Diameter threads with 24 threads per inch. Be very careful not to confuse a 1.375 inch x 24 TPI because that is Italian threaded and that .005 inch does usually make a difference though I sure someone here probably tried and it worked for them.

The other thing you need to know is the BB shell width. The mfr or google search might find that but you also can find that out by taking it apart and measuring the width of the shell from one side of the bike to the other side. Usually you need that measurement in millimeters. Some BBs are made for a specific width and others are designed for a narrow range of width.

You also need to know what your crank is. And then you have to find an English threaded BB of the proper width that also fits your particular crank or the new one you might purchase.

What are you expecting from upgrading the BB? If it's working and you are okay with the current cranks you really won't gain much, except maybe the knowledge of how to change one.
Iride01 is offline  
Old 07-22-19, 04:30 PM
  #6  
thehammerdog
Senior Member
Thread Starter
 
thehammerdog's Avatar
 
Join Date: Dec 2007
Location: NWNJ
Posts: 3,704

Bikes: Road bike is a Carbon Bianchi C2C & Grandis (1980's), Gary Fisher Mt Bike, Trek Tandem & Mongoose SS MTB circa 1992.

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 722 Post(s)
Liked 353 Times in 226 Posts


Bike
Originally Posted by ksryder
It's an FSA Gossamer-- I think that pretty much explains why he wants to upgrade.
Indeed
well I suppose the thing needs grease or bearings or something plus i want a nicer lighter set cannot afford nee bike so figured why not make this upgrade

Last edited by thehammerdog; 07-22-19 at 04:34 PM. Reason: Photo added
thehammerdog is offline  
Old 07-22-19, 04:37 PM
  #7  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,461
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,316 Times in 2,701 Posts
I think Italian bbs are threaded opposite so you are unlikely to confuse them. Current Shimano cranks with HT II all use the same bb, though there are several group levels to suit your budget. I'd suggest a current Shimano crank that matches the rest of your components.
shelbyfv is offline  
Old 07-23-19, 07:40 AM
  #8  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,936

Bikes: Several, mostly not name brands.

Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3571 Post(s)
Liked 3,367 Times in 1,916 Posts
Originally Posted by Iride01
I'd agree it's probably english threaded BSA. So that means it's 1.37inches Diameter threads with 24 threads per inch. Be very careful not to confuse a 1.375 inch x 24 TPI because that is Italian threaded
No, 1.375 x 24tpi is ISO thread, and compatible with English. Italian is 36mm x 24tpi, and an English or ISO cup will simply fall into an Italian thread shell without engaging any threads.

Originally Posted by shelbyfv
I think Italian bbs are threaded opposite so you are unlikely to confuse them.
English and ISO thread shells use standard thread on the non-drive side, and reverse ("left-hand") thread on the drive side to prevent precessional loosening. Italian thread shells use standard thread on both sides. As noted above, an English or ISO cup will simply fall into an Italian thread shell without engaging any threads.
JohnDThompson is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
raria
Bicycle Mechanics
15
10-06-17 09:41 AM
ian0789
Bicycle Mechanics
3
01-18-15 11:36 AM
billh
Bicycle Mechanics
10
09-13-13 08:14 AM
buffalowings
Bicycle Mechanics
9
03-29-13 09:56 AM
puckdaddy
Road Cycling
6
07-22-11 02:25 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.