Frame Life
#1
OldSchool
Thread Starter
Frame Life
What is the mileage life expectancy of a steel frame (Columbus TSX tubing on a Pinarello). Discounting other factors (assuming this is a fair weather bike only), if someone says they have 4,000 miles on the frame, is that a non factor in evaluating the value of the bike?
#2
Riding to fill the void
Join Date: Dec 2005
Location: NC Foothills
Posts: 105
Bikes: 1998 Kona Caldera
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What is the mileage life expectancy of a steel frame (Columbus TSX tubing on a Pinarello). Discounting other factors (assuming this is a fair weather bike only), if someone says they have 4,000 miles on the frame, is that a non factor in evaluating the value of the bike?
Deep rust, or rust inside the tubes, though is bad news...
#3
Senior Member
Life expectancy-till it rusts away which for all practical purposes, is forever unless you leave the bike outside in the weather. Mileage doesn't matter but obviously he more mielage, the more likely it has been crashed, but a crash that caused any damage is readily apparent.
__________________
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
#5
Sir Fallalot
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
In theory a steel frame can live forever (unlike some other metals *cough* any alloy of aluminum *cough*). In practice, my steel frames have never failed me. One has over 100.000 Km in it (pre-owned steel MTB frame I use as a $hitbike) the other has 20.000 Km. The third one is from 1990 and I don't know for sure, but it must have various tens of thousands of Km on it (also pre-owned, Specialized Allez).
I also have a brand new Redline Monocog 29er which I'll probably leave to my grandchildren. One day.
TO BE HONEST an aluminum frame alloyed with scandium has a very much prolongued fatigue life. But what I wrote above is true: steel CAN, in theory, support a certain amount of compressive or tensile stresses without ANY (=0) plastic deformations. Titanium is the same. Carbon fiber, in a sense, is like that, too. Aluminum isn't. There even the smallest stress will cause SOME crystal structure displacements/plastic deformations.
I also have a brand new Redline Monocog 29er which I'll probably leave to my grandchildren. One day.
TO BE HONEST an aluminum frame alloyed with scandium has a very much prolongued fatigue life. But what I wrote above is true: steel CAN, in theory, support a certain amount of compressive or tensile stresses without ANY (=0) plastic deformations. Titanium is the same. Carbon fiber, in a sense, is like that, too. Aluminum isn't. There even the smallest stress will cause SOME crystal structure displacements/plastic deformations.
Last edited by wroomwroomoops; 10-11-07 at 04:05 PM.
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Steel and Ti frames can last nearly forever if not crashed or abused. I have a Litespeed Ti frame with 70,000 miles and it is still in perfect condition so 4,000 miles is not even broken-in.
I also have an '83 Trek lugged steel frame with God-knows how many miles (I got it used) and it's also perfect.
Aluminum frames, particularly very light, thin wall ones, have a finite fatigue life and are always questionable in used form.
I also have an '83 Trek lugged steel frame with God-knows how many miles (I got it used) and it's also perfect.
Aluminum frames, particularly very light, thin wall ones, have a finite fatigue life and are always questionable in used form.
Last edited by HillRider; 10-11-07 at 06:40 PM.
#7
My bikes became Vintage
Nishiki frames had a 25 year warranty, but mine look like they'll last at least twice that long.
#8
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#9
Senior Member
Join Date: Dec 2005
Posts: 7,848
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have a custom made columbus sl since 1987 maybe. No problems with him ever. And probably it will last long enough to be used by my kids in a few more years. So such a thing of a lifespan is so relative. For example years ago many italian bikes had failures in their tubes or lugs, since day 1 u knew the bike was going to last 2 or 4 years like for example atala's. A Miyata Dura ace i had (this model never came to the us) used to get craked in the middle of the BB after 6 months, all of them got the same issue so the solution was take the bike straight to a frame builder to get the BB reinforced, repaint and then the frame last forever, after more than 25 years a friend still have his. Alan's were famous for having issues in the their forks. Aluminum Vitus had similar issues and other related with bonding.
Now a days with carbon u can get lifetime warrantee from some brands but only a few brands deos that, for example Pinarello gives you 6 months i believe in their carbon frames, so no wonder why is hard to see Pinarello's moving around.
Thanks.
Now a days with carbon u can get lifetime warrantee from some brands but only a few brands deos that, for example Pinarello gives you 6 months i believe in their carbon frames, so no wonder why is hard to see Pinarello's moving around.
Thanks.
#12
Senior Member
Join Date: May 2007
Posts: 72
Bikes: Condor Italia + Marin Muirwoods (which got me back into riding)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Age and rust are much more important (unless there is crash damage). I only say age because you want to take more care checking over a 5 year old frame than a 1 year old one.
I've ridden 4,000 miles in the last 18 months and I'd bet my bike is in better condition than soneone who has ridden 20 miles and left the bike to rot in the garage the rest of the time. Don't worry about distance.
I've ridden 4,000 miles in the last 18 months and I'd bet my bike is in better condition than soneone who has ridden 20 miles and left the bike to rot in the garage the rest of the time. Don't worry about distance.
#13
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
I agree with all of the above UNLESS the bike has been raced.
I once had a chance to ride Brian Walton's spare bike when he rode for Mororola. On the outside everything looked great. When I got out of the saddle it was a noodle. Take it for a quick spin on a less than perfect road and get a feel for how solid the bike still is. If it feels ok it will probably last you for years.
I once had a chance to ride Brian Walton's spare bike when he rode for Mororola. On the outside everything looked great. When I got out of the saddle it was a noodle. Take it for a quick spin on a less than perfect road and get a feel for how solid the bike still is. If it feels ok it will probably last you for years.
Last edited by Bob Dopolina; 10-13-07 at 04:52 AM.
#14
Senior Member
Join Date: Dec 2005
Location: Boulder, Colorado
Posts: 1,383
Bikes: Cinelli Supercoursa 69, Ritchey Breakaway Cross, Mondonico Diamond Extra 05, Coors Light Greg Lemond (built by Scapin) 88, Scapin MTB, Stumpjumper 83, Specialized Stumpjumper M4, Lemond Poprad 2001
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 2 Times
in
1 Post
My 1969 Cinelli is still going strong and is way north of 150K miles.
#16
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Frames do not "soften" or become more flexible with age and miles. That is an "old wives tale" used by riders to convince their wives or sponsors they need a newer bike but it has no basis in metalurgy. Frames fail by breaking somewhere, they do not soften gradually.
#17
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
I asked a mechanical engineer friend about this once, and he said basically the same thing. With that being said, you will still have folks who swear a frame has gotten "soft." I remember Dirtdrop saying he once stripped a steel frame of its paint and discovered hairline cracks he wouldn't have known were there otherwise. I suspect something like this scenario is the cause of "soft" frames, either that or it's all in the riders' heads.
Last edited by well biked; 10-13-07 at 08:44 AM.
#18
Sir Fallalot
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
+1
I asked a mechanical engineer friend about this once, and he said basically the same thing. With that being said, you will still have folks who swear a frame has gotten "soft." I remember Dirtdrop saying he once stripped a steel frame of its paint and discovered hairline cracks he wouldn't have known were there otherwise. I suspect something like this scenario is the cause of "soft" frames, either that or it's all in the riders' heads.
I asked a mechanical engineer friend about this once, and he said basically the same thing. With that being said, you will still have folks who swear a frame has gotten "soft." I remember Dirtdrop saying he once stripped a steel frame of its paint and discovered hairline cracks he wouldn't have known were there otherwise. I suspect something like this scenario is the cause of "soft" frames, either that or it's all in the riders' heads.
The "spore" misstyping was so much more fun than this revisionist history here.
#19
Making a kilometer blurry
I have over 100,000 miles on a Bridgestone RB-1, and probably 35,000 miles on my Ritchey Road logic. It's gonna last.
#20
Geek Extraordinaire
Join Date: Feb 2006
Location: Long Beach, CA
Posts: 1,769
Bikes: Bianchi Advantage Fixed Conversion; Specialized Stumpjumper FS Hardtail
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
One other thing:
If you do buy the bike, it wouldn't hurt to clean out the seat tube (a trombone cleaner works great for this, $5 at you local music store) and use some framesaver. I've been told that the seat tube is really the only tube that needs to be sprayed, but if you have a bare frame, it doesn't hurt to spray everywhere you can.
If you do buy the bike, it wouldn't hurt to clean out the seat tube (a trombone cleaner works great for this, $5 at you local music store) and use some framesaver. I've been told that the seat tube is really the only tube that needs to be sprayed, but if you have a bare frame, it doesn't hurt to spray everywhere you can.
__________________
I'd rather have a bottle in front of me than a frontal lobotomy.
Sintesi Conversion Serotta Track
I'd rather have a bottle in front of me than a frontal lobotomy.
Sintesi Conversion Serotta Track
#21
Sir Fallalot
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
One other thing:
If you do buy the bike, it wouldn't hurt to clean out the seat tube (a trombone cleaner works great for this, $5 at you local music store) and use some framesaver. I've been told that the seat tube is really the only tube that needs to be sprayed, but if you have a bare frame, it doesn't hurt to spray everywhere you can.
If you do buy the bike, it wouldn't hurt to clean out the seat tube (a trombone cleaner works great for this, $5 at you local music store) and use some framesaver. I've been told that the seat tube is really the only tube that needs to be sprayed, but if you have a bare frame, it doesn't hurt to spray everywhere you can.
Wow, great advice! Would you kindly post it in the "hints 'n' tricks"? Especially the trombone cleaner part is awesome. I'mma gonna buy me a trombone cleaner.
#22
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Frame fatigue is an issue that doesn't blip my radar.
#24
Geek Extraordinaire
Join Date: Feb 2006
Location: Long Beach, CA
Posts: 1,769
Bikes: Bianchi Advantage Fixed Conversion; Specialized Stumpjumper FS Hardtail
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The fine print is Original Owner.
__________________
I'd rather have a bottle in front of me than a frontal lobotomy.
Sintesi Conversion Serotta Track
I'd rather have a bottle in front of me than a frontal lobotomy.
Sintesi Conversion Serotta Track
#25
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
The frames I was refering to are the ultra light, very thin wall competition frames sold strictly for racing. They are made to be light above all else and longevity isn't an issue as they are replaced every racing season. Maybe they will last a lot longer but I wouldn't spend my money finding out.