Trainer or Rollers
#1
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Cincinnati
Posts: 54
Bikes: 19?? Pacific Quasar, 2008 Cannondale Synapse. 2009 Specialized Hard Rock Disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Trainer or Rollers
Don't care to mess with the weather. Which do you use?
#3
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,627
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1671 Post(s)
Liked 1,828 Times
in
1,063 Posts
I've got both; over the last few years just used the trainer - but, and it's a big but - unlike rollers, you gotta be real careful you don't develop bad habits on a trainer. Your bike's locked down and you don't have to have the slightest balance or subtlety. I see folks out in the spring after a winter of spin classes, stomping at the pedals and bobbing&weaving their upper bodies, their bicycles lurching and twitching around the road.
#4
Junior Member
Join Date: Jun 2013
Location: NoVa
Posts: 105
Bikes: 1993 GT Corrado, 1999 Kona Explosif, 2014 Cannondale Synapse Carbon 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
I had a set of Minoura mag rollers 20 or so years ago which were pretty inexpensive and worked pretty well. I currently use Kreitler Challengers with the fan attachment. The fan is awesome, not only do you get to direct a nice breeze but you can adjust the resistance for an incredible workout.
I do see a lot of options on the trainers that I'm a bit jealous of, such as interfacing with a computer, programmed workouts etc. Overall though I like the rollers because they require me to pay attention to what I'm doing and are built like the proverbial brick *****house. They will probably outlive me. If you have never used both be aware that it is much different than riding outdoors. It can be a grind and at least for me, I have to find things to keep my interest up. Most times it's just finding the right music, on rare occasions I'll put a tv on a shelf in front of me. The best is when my six year-old yells "go daddy go"...
I do see a lot of options on the trainers that I'm a bit jealous of, such as interfacing with a computer, programmed workouts etc. Overall though I like the rollers because they require me to pay attention to what I'm doing and are built like the proverbial brick *****house. They will probably outlive me. If you have never used both be aware that it is much different than riding outdoors. It can be a grind and at least for me, I have to find things to keep my interest up. Most times it's just finding the right music, on rare occasions I'll put a tv on a shelf in front of me. The best is when my six year-old yells "go daddy go"...
Last edited by K100Fran; 12-11-14 at 10:08 AM. Reason: fixed spelling
#5
Senior Member
Join Date: May 2008
Posts: 870
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
I have used both but rollers (same as K100Fran) are ultimately better because it is closer to the feel of the road it is also good for balance and smoothness. A little less boring than a home trainer because you involve more of your body for balancing.
The home trainer feels like you are glued to the ground!
The home trainer feels like you are glued to the ground!
#6
Senior Member
Join Date: May 2008
Posts: 2,712
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
This may be a stupid question; but this is the internet and I've not used rollers. So, how does one start and stop when using rollers?
Outdoors there is that little bit of wobble and moving around while in the process of starting and getting clipped in. I envisage that translating to falling on the nearest object when using rollers.
Outdoors there is that little bit of wobble and moving around while in the process of starting and getting clipped in. I envisage that translating to falling on the nearest object when using rollers.
#7
Junior Member
Join Date: Dec 2014
Location: The Hague
Posts: 12
Bikes: Felt F1, Dolan Pre Cursa
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This may be a stupid question; but this is the internet and I've not used rollers. So, how does one start and stop when using rollers?
Outdoors there is that little bit of wobble and moving around while in the process of starting and getting clipped in. I envisage that translating to falling on the nearest object when using rollers.
Outdoors there is that little bit of wobble and moving around while in the process of starting and getting clipped in. I envisage that translating to falling on the nearest object when using rollers.
in the beginning it's easy to roll somewhere where you can grip. go on your bike, put the bike on the rollers, take a seat on your saddle (while holding a chair or something, click in to your pedals and start rolling. when you got enough speed just try the balance without holding the chair.
#8
Senior Member
Join Date: May 2008
Posts: 2,712
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
it's easy, you just start and keep balance.
in the beginning it's easy to roll somewhere where you can grip. go on your bike, put the bike on the rollers, take a seat on your saddle (while holding a chair or something, click in to your pedals and start rolling. when you got enough speed just try the balance without holding the chair.
in the beginning it's easy to roll somewhere where you can grip. go on your bike, put the bike on the rollers, take a seat on your saddle (while holding a chair or something, click in to your pedals and start rolling. when you got enough speed just try the balance without holding the chair.
#9
Senior Member
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
2 Posts
I've got both, but don't use either. I "mess with the weather." I've found both to be mind numbingly boring.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
#13
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Lets' see. Leaning over to keep hand on chair. Pedaling to get started. Turning loose of chair and swinging body upright. All the time being sure the bike doesn't slide sideways and dump the whole thing on the floor. Doesn't read easy. Now I see why most people use trainers.
#14
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,627
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1671 Post(s)
Liked 1,828 Times
in
1,063 Posts
#15
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
Both can be deadly boring, but rollers at least force you to pay attention. And your riding technique is sure to improve on rollers: both smoothness of pedaling and ability to hold a line.
#16
Junior Member
Join Date: Jun 2013
Location: NoVa
Posts: 105
Bikes: 1993 GT Corrado, 1999 Kona Explosif, 2014 Cannondale Synapse Carbon 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
There is a short learning curve but after a while it's second hand. You'll be able to grab a water bottle, shift etc in no time.
Anybody can use a trainer, but you ride rollers.
Just check out this guy...(he's got skills!)
https://www.youtube.com/watch?v=VoApbqiKAB4
Anybody can use a trainer, but you ride rollers.
Just check out this guy...(he's got skills!)
https://www.youtube.com/watch?v=VoApbqiKAB4
#17
Climbers Apprentice
Join Date: Feb 2012
Posts: 1,600
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just bought my second trainer because I wanted more computer control and better integration with my HR strap and cadence sensor.
If you want to not be bored on a trainer, get one electronically controlled. When you are doing a ride on trainer road and that resistance jacks up to 120% ftp, you are no longer bored
If you want to not be bored on a trainer, get one electronically controlled. When you are doing a ride on trainer road and that resistance jacks up to 120% ftp, you are no longer bored
#18
Senior Member
Join Date: May 2008
Posts: 870
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
It is easier to ride without hands on handlebars because the steering is so touchy--nice and fun video--there is another where mattresses are laid on both sides and you guessed it the cyclist falls in different funny ways!
#19
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,544
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3895 Post(s)
Liked 1,944 Times
in
1,389 Posts
Rollers. I highly recommend spending the extra money to get rollers with resistance. That makes the set into a much more versatile and less boring training tool.
Rollers are easy to get started on. Position the center of the set in a doorway that's narrow enough for you to reach the door jambs with your elbows before you come off the rollers. If you are cursed with wide modern doors, improvise. Mount, put both hands on the bars, balance yourself with one elbow, and start pedaling! The faster you go, the easier it is. Move the bike laterally by lightly pushing down on the bar that's on the side where you want to go.
Rollers are easy to get started on. Position the center of the set in a doorway that's narrow enough for you to reach the door jambs with your elbows before you come off the rollers. If you are cursed with wide modern doors, improvise. Mount, put both hands on the bars, balance yourself with one elbow, and start pedaling! The faster you go, the easier it is. Move the bike laterally by lightly pushing down on the bar that's on the side where you want to go.
#20
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
I just bought my second trainer because I wanted more computer control and better integration with my HR strap and cadence sensor.
If you want to not be bored on a trainer, get one electronically controlled. When you are doing a ride on trainer road and that resistance jacks up to 120% ftp, you are no longer bored
If you want to not be bored on a trainer, get one electronically controlled. When you are doing a ride on trainer road and that resistance jacks up to 120% ftp, you are no longer bored
#21
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Cincinnati
Posts: 54
Bikes: 19?? Pacific Quasar, 2008 Cannondale Synapse. 2009 Specialized Hard Rock Disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the feedback. Just bought rollers.
#22
Semper Fi
Join Date: Jan 2008
Posts: 12,942
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 358 Times
in
241 Posts
Which rollers did you choose? I want a trainer, or another set of rollers, and I'd be interested in knowing about your choice. I used rollers a lot back in the late 70's and early 80's, always felt my balance improved from riding on them, trainers didn't really have anything to offer back then. I owned some Kreitler rollers, very well made and sturdy equipment that always felt smooth. I was warned about the drive belt being a weak point by the friend I purchased them from, but I never had it break on me. Post some pics when you get it going.
Bill
Bill
__________________
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
#25
Junior Member
Join Date: Jun 2013
Location: NoVa
Posts: 105
Bikes: 1993 GT Corrado, 1999 Kona Explosif, 2014 Cannondale Synapse Carbon 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
I recommend you don't try too much too soon, you'll get burned out. Definitely report back and give us your thoughts.