Chain stays and Boost spacing
12-08-23, 01:07 PM
#1
Full Member
Thread Starter
Chain stays and Boost spacing
I am building a steel "adventure touring" bike for my son. When I bought the tubes (BFS) I purchased chain stays for a "plus/fat" size. I am following the basic geometry of my 2013 Ti Fargo. I want it to accommodate 29 x 2.6" as a maximum tire size. I am under the impression that I should use a boost crank and rear hub to buy me some clearance. I will be using 26/36 double chainrings, and a 10 speed cassette. Do these assumptions seem reasonable?
12-08-23, 02:45 PM
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
Yes. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
