Computer built wheels
#1
Banned
Thread Starter
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times
in
635 Posts
Computer built wheels
Most cyclist feel that having wheels built by a master wheel builder is the zenith of bike wheels. Well maybe they are, but most of us do not have a set of them.
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
#2
Banned
Bike parts Wholesalers (To Bike Shops) make up wheels using automated wheel machines,
The assembly factories making new bikes do too.
The assembly factories making new bikes do too.
#4
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,437 Times
in
2,763 Posts
I don't know about computers but my understanding is that machine built wheels can be as "good" as the manufacturer chooses, depending on how many passes ($$) through the tensioning process. It's been awhile since I read about that so it could be all different now.
Likes For shelbyfv:
#5
Full Member
Likes For RiceAWay:
#6
Full Member
Most cyclist feel that having wheels built by a master wheel builder is the zenith of bike wheels. Well maybe they are, but most of us do not have a set of them.
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
Likes For RiceAWay:
#7
Senior Member
Join Date: Jul 2020
Location: Parts Unknown
Posts: 356
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 325 Post(s)
Likes: 0
Liked 109 Times
in
72 Posts
The OEM wheels that were on my touring bike when I bought it were definitely "computer built," and I usually checked their trueness about once a year. I never had to make more than a minor adjustment to those wheels.
I ended up building a new front wheel for that same bike (laced a Sturmey Archer XL-FDD into a Mavic A319) because my V-brake arms were wearing out too quickly due to my all-weather riding habits. The drum brake in the new hub gave me a permanent solution to my front braking needs, so I built the wheel myself. I've checked it for trueness once a year (about 4 years total) and have never had to make any adjustments. Once the spokes were properly tensioned and balanced, that wheel became pretty much bomb-proof.
That's been my experience with pretty much all my wheels across 5 different bikes over the years: once you get the spoke tension right, there's not much in the day-to-day world that will un-true a good wheel.
I ended up building a new front wheel for that same bike (laced a Sturmey Archer XL-FDD into a Mavic A319) because my V-brake arms were wearing out too quickly due to my all-weather riding habits. The drum brake in the new hub gave me a permanent solution to my front braking needs, so I built the wheel myself. I've checked it for trueness once a year (about 4 years total) and have never had to make any adjustments. Once the spokes were properly tensioned and balanced, that wheel became pretty much bomb-proof.
That's been my experience with pretty much all my wheels across 5 different bikes over the years: once you get the spoke tension right, there's not much in the day-to-day world that will un-true a good wheel.
#8
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
Road a Wheelmaster wheel for well over 30 years and never turned a spoke more than 1/4 turn in all that time. Magic MA40 rim with 36 ST Swiss straightgage spokes. This is with a 220 pound rider. Only reason I replaced it was it ate a broken chain.
Always amazed when people state categorically to always buy a hand built wheel. Not sure how much of that is factual, how much is posturing and how much is someone wanting a union card punched
Always amazed when people state categorically to always buy a hand built wheel. Not sure how much of that is factual, how much is posturing and how much is someone wanting a union card punched
#9
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,400 Times
in
1,934 Posts
Back in the early 80s, Trek used a wheel building robot from Holland Mechanics. The robot needed to be fed wheels that had been manually laced, and then it tensioned the spokes. The wheels were touched up by hand after leaving the robot.
Things have progressed since then, e.g.:
Things have progressed since then, e.g.:
#10
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,219 Times
in
2,366 Posts
Always amazed when people state categorically to always buy a hand built wheel. Not sure how much of that is factual, how much is posturing and how much is someone wanting a union card punched
And, news flash, there is no bicycle wheel builders union. Custom wheel builders are usually individuals that build wheels through a shop or as a side job or because they just like to build wheels. I guarantee that no one is getting rich off of building wheels. The cost of parts at wholesale is expensive and, when labor and markup are included, the cost of a wheel set quickly becomes prohibitively expensive. The bike and bike wheel manufacturers buy thousands of units and get a huge price break on the parts. Some guy building 10 wheels a year on spec can’t get the same break. Add in overhead...shop rental, insurance, utilities...and the little guy isn’t going to make much on an expensive wheel set. They are almost doing you a favor.
I build my own wheels...I don’t build for others due to liability...and I also teach people how to build wheels through my local co-op. The very first thing I tell my students is
...Let me start by saying that if you are planning on building a wheel to beat the price the “Man” charges for a new wheel, stop right there. Just as with building up a bicycle, don’t do it to save money. You won’t. Machine built wheels are available at less cost than any hand built wheel. If you just need a wheel at a reasonable price, talk to a bike shop. They can find you really good wheels for very reasonable prices.
Now that I’ve turned you off to the whole idea of building wheels, I’ll address some of the reasons that you should build a wheel.There are certain wheel combinations that you just won’t find in a prebuilt wheel. Seldom are you going to find butted spokes or boutique hubs. Perhaps you want wider rims or even narrower rims. Perhaps you want some combination of wheel components that will be lighter and stronger than what you can get in a prebuilt wheel. You might tour and want stronger wheels so that you don’t have to replace broken spokes. Maybe you like the idea of riding on something that you built. The list is endless.
Just don’t go building wheels to “stick it to the Man”. The House always wins.
Just don’t go building wheels to “stick it to the Man”. The House always wins.
But never assume anyone is getting rich off of bicycles.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School When It Wasnt Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School When It Wasnt Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#11
Senior Member
Join Date: Jul 2009
Posts: 5,949
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3952 Post(s)
Liked 7,299 Times
in
2,947 Posts
I've searched everywhere, but I haven't been able to find an app for my computer that will allow it to build wheels. Is it because I'm using a Mac?
#13
Senior Member
Back in the early 80s, Trek used a wheel building robot from Holland Mechanics. The robot needed to be fed wheels that had been manually laced, and then it tensioned the spokes. The wheels were touched up by hand after leaving the robot.
Things have progressed since then, e.g.:
https://www.youtube.com/watch?v=hKLkr2hM524
Things have progressed since then, e.g.:
https://www.youtube.com/watch?v=hKLkr2hM524
A skilled wheelbuilder doing production work - series of wheels all to same spec - should build a wheel in about fifteen minutes. I will name names if anyone cares. Full custom wheels take 20 minutes. Capex on a hand build wheel shop is trivial. It would take a market for huge volumes of wheels for the machine built wheel to make any sense. Sure, Giant and Trek will want these. Most others should work with humans. But that would mean respecting humans.
Even in the promo video Shuz Tung has a more manual setup for high end wheels. Accuracy of 0.1mm is presented as some sort of big deal. Hand built wheels hit that mark every time if the rim itself is accurate.
One of my favorite wheels was built by Oscar Wastyn in 1959. Did not have huge miles when I got it but plainly had been used. Prewar FB hub, 32 hole. Unknown spokes about 1.9/1.4mm butted with a uniform layer of protective rust. Fiamme Red Label rim, a rim that all over at C&V will claim is Kleenex. So far about 10,000 miles in my custody. Have not done a thing to that wheel and it is dead straight, perfectly centered, absolutely uniformly tensioned.
#14
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,614
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10964 Post(s)
Liked 7,491 Times
in
4,189 Posts
Most cyclist feel that having wheels built by a master wheel builder is the zenith of bike wheels. Well maybe they are, but most of us do not have a set of them.
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
My experiences are...
- single wall rim machine built wheels are trash. The ones I have come across through refurbishing bikes have consistently been unimpressive. They were all machine built based on a cost avoidance strategy. Many are out of true both radially and laterally. Lateral trying is easy enough so thats usually what gets fixed.
- modern double wall rim machine built wheels can be good and can be terrible. It all depends on the rider and how much time went into tensioning and trying the wheels during the build. This is, as mentioned, the number of cycles a wheel goes through.
Some have been great for years. Some are absurdly high tensioned and true. Some are low tensioned and true.
- handbuilt wheels have been great. simple as that.
#15
Non omnino gravis
So long as it's properly laced and tensioned, it doesn't matter if a man did it or a machine did it. At the same time, it's not like there's some absurd cost that prevents us from buying handbuilt wheels. I have 6 bikes in my shop, and five them are on handbuilt wheels.
And as I've said what feels like a zillion times, rating a component based on it's life in years in kinda meaningless-- you could have a wheel from 1978 that's been hanging in a garage for 40 years. The hand-built front wheel on my Ritchey has 22,000 miles on it. Never been touched.
And as I've said what feels like a zillion times, rating a component based on it's life in years in kinda meaningless-- you could have a wheel from 1978 that's been hanging in a garage for 40 years. The hand-built front wheel on my Ritchey has 22,000 miles on it. Never been touched.
#16
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,219 Times
in
2,366 Posts
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School When It Wasnt Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School When It Wasnt Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#17
Senior Member
The Shuz Tung machinery does not look that fast. Lots of steps still done purely by hand. But it will work with hands that have no skill. That is the only purpose. It is about total respect for capex and zero respect for humans.
A skilled wheelbuilder doing production work - series of wheels all to same spec - should build a wheel in about fifteen minutes. I will name names if anyone cares. Full custom wheels take 20 minutes. Capex on a hand build wheel shop is trivial. It would take a market for huge volumes of wheels for the machine built wheel to make any sense. Sure, Giant and Trek will want these. Most others should work with humans. But that would mean respecting humans.
Even in the promo video Shuz Tung has a more manual setup for high end wheels. Accuracy of 0.1mm is presented as some sort of big deal. Hand built wheels hit that mark every time if the rim itself is accurate.
One of my favorite wheels was built by Oscar Wastyn in 1959. Did not have huge miles when I got it but plainly had been used. Prewar FB hub, 32 hole. Unknown spokes about 1.9/1.4mm butted with a uniform layer of protective rust. Fiamme Red Label rim, a rim that all over at C&V will claim is Kleenex. So far about 10,000 miles in my custody. Have not done a thing to that wheel and it is dead straight, perfectly centered, absolutely uniformly tensioned.
A skilled wheelbuilder doing production work - series of wheels all to same spec - should build a wheel in about fifteen minutes. I will name names if anyone cares. Full custom wheels take 20 minutes. Capex on a hand build wheel shop is trivial. It would take a market for huge volumes of wheels for the machine built wheel to make any sense. Sure, Giant and Trek will want these. Most others should work with humans. But that would mean respecting humans.
Even in the promo video Shuz Tung has a more manual setup for high end wheels. Accuracy of 0.1mm is presented as some sort of big deal. Hand built wheels hit that mark every time if the rim itself is accurate.
One of my favorite wheels was built by Oscar Wastyn in 1959. Did not have huge miles when I got it but plainly had been used. Prewar FB hub, 32 hole. Unknown spokes about 1.9/1.4mm butted with a uniform layer of protective rust. Fiamme Red Label rim, a rim that all over at C&V will claim is Kleenex. So far about 10,000 miles in my custody. Have not done a thing to that wheel and it is dead straight, perfectly centered, absolutely uniformly tensioned.
And what about highend aero wheels with internal spokes? Gonna need a human there.
#18
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
I've seen wheels on two new bikes in the family fleet go out of true, and found both of them to be under-tensioned. Both were name brands, albeit relatively low end models, purchased at LBS's. I would personally check the tensioning on any new wheel. On the other hand, two other new bikes, a Surly and a Diamondback, both had impeccably built wheels.
The quality of today's bikes is like the quality of cars up through the 1970s: Hit or miss. Bikes are not fully tested before they leave the factory. A built up frameset is pulled off one pile, wheels from another pile, and they're thrown in a box. What you ultimately get depends on the hands that the bike passes through after it leaves the factory, including your own. With that said, I'm sure reputable dealers don't want to waste their time reworking bikes, or deal with excessive warranty service, and have an interest in selling a decent bike. But they will take matters into their own hands if needed.
After a few beginner attempts that were substandard, my home built wheels have held up quite well, though I have not put as many hard miles on them as some here. At 14 miles per hour, it takes me longer to put miles on my wheels. I build wheels because I like oddball hub combinations, like an ancient Sturmey Archer on a new Sun CR18 rim.
The quality of today's bikes is like the quality of cars up through the 1970s: Hit or miss. Bikes are not fully tested before they leave the factory. A built up frameset is pulled off one pile, wheels from another pile, and they're thrown in a box. What you ultimately get depends on the hands that the bike passes through after it leaves the factory, including your own. With that said, I'm sure reputable dealers don't want to waste their time reworking bikes, or deal with excessive warranty service, and have an interest in selling a decent bike. But they will take matters into their own hands if needed.
After a few beginner attempts that were substandard, my home built wheels have held up quite well, though I have not put as many hard miles on them as some here. At 14 miles per hour, it takes me longer to put miles on my wheels. I build wheels because I like oddball hub combinations, like an ancient Sturmey Archer on a new Sun CR18 rim.
#19
Passista
Join Date: Jul 2005
Posts: 7,599
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaņa pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 868 Post(s)
Liked 721 Times
in
396 Posts
I'm no master wheel builder at all, but I built all my wheels - I enjoyed the work, they turned out pretty good, and it's satisfying to ride them.
#20
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
Most cyclist feel that having wheels built by a master wheel builder is the zenith of bike wheels. Well maybe they are, but most of us do not have a set of them.
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
OTOH both my bike and trike im sure has computer built wheels. My bike is 12 years old and my trike is 9 years old, and the 5 wheels on both of them are perfectly true yet. I have never had to put a spoke wrench on any of them.
What has been your experience?
#21
Senior Member
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,733
Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 781 Times
in
498 Posts
#22
Banned