Go Back  Bike Forums > Bike Forums > Cyclocross and Gravelbiking (Recreational)
Reload this Page >

Least expensive sub 20lb cyclocross style.

Search
Notices
Cyclocross and Gravelbiking (Recreational) This has to be the most physically intense sport ever invented. It's high speed bicycle racing on a short off road course or riding the off pavement rides on gravel like : "Unbound Gravel". We also have a dedicated Racing forum for the Cyclocross Hard Core Racers.

Least expensive sub 20lb cyclocross style.

Thread Tools
 
Search this Thread
 
Old 01-20-24, 06:11 PM
  #1  
RH Clark
Senior Member
Thread Starter
 
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times in 259 Posts
Least expensive sub 20lb cyclocross style.

Who makes the least expensive sub 20 lb. bike that will handle at least 32mm but preferably slightly wider 700c tires. Just wondering if anything is out there even direct consumer that I am not aware of. I am less interested in group set than overall weight. I have no problem assembling a bike.
RH Clark is offline  
Old 01-20-24, 06:28 PM
  #2  
base2 
I am potato.
 
base2's Avatar
 
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,116

Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1789 Post(s)
Liked 1,629 Times in 933 Posts
You can get almost any bike down to sub-20 with enough $€ĄŁ in proper component selection.

My steel CX bike with discs that accepts 700x38's weighs 16lbs with pedals, power meter & bottle cages. It wasn't cheap. My steel disc mixte weighs 3 pounds more (19 with pedals, Powermeter and bottle cages, too) & cost 1/3 as much (partly because I had a healthy spare parts bin). Any carbon bike could easily beat this.

You might sharpen your question as it is so broad as to be unanswerable.

Last edited by base2; 01-20-24 at 07:13 PM.
base2 is offline  
Likes For base2:
Old 01-20-24, 07:30 PM
  #3  
RH Clark
Senior Member
Thread Starter
 
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times in 259 Posts
I am asking about something that can be purchased as a complete bike and assembled, not what can be assembled when buying separate parts from different sources.
RH Clark is offline  
Old 01-20-24, 09:09 PM
  #4  
stevel610 
Senior Member
 
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,299

Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 366 Post(s)
Liked 457 Times in 240 Posts
WABI Thunder if you can get by with 1 speed. Fits 700x50c.

Last edited by stevel610; 01-20-24 at 09:13 PM.
stevel610 is offline  
Likes For stevel610:
Old 01-21-24, 06:49 AM
  #5  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,437 Times in 2,763 Posts
If you are OK with 35s, endurance bikes like the Giant Defy Adv are alleged to be about 17lbs.
shelbyfv is offline  
Likes For shelbyfv:
Old 01-21-24, 09:24 AM
  #6  
RH Clark
Senior Member
Thread Starter
 
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times in 259 Posts
Originally Posted by shelbyfv
If you are OK with 35s, endurance bikes like the Giant Defy Adv are alleged to be about 17lbs.
17-19 Lbs. is what I am looking for. Just wondering the least expensive way to get there other than finding a used deal. I have an 18 lb. race bike but 25mm tires is the widest it will fit. I have several heavier bikes that will fit wider tires.
RH Clark is offline  
Old 01-21-24, 09:33 AM
  #7  
Steve B.
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,885

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3242 Post(s)
Liked 2,086 Times in 1,181 Posts
I think the stock Cannondale Topstone carbons are under 20 lbs. They are a few pounds lighter than the aluminum’s, my ALU is 22-1/2 lbs. I would imagine with some light carbon wheels you would see 18. Also pay attention to the tires to get something light.
Steve B. is online now  
Old 01-21-24, 09:55 AM
  #8  
RH Clark
Senior Member
Thread Starter
 
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times in 259 Posts
Forgot to mention, I ride a 58cm.
RH Clark is offline  
Old 01-21-24, 12:28 PM
  #9  
Trakhak
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,375
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2484 Post(s)
Liked 2,956 Times in 1,679 Posts
Lowest weight for lowest price: there are probably other choices now, such as Canyon, but I bought my last two bikes from BikesDirect and have been happy with both. (I used to manage bike stores and got used to employee discounts for bikes. BikesDirect's bikes were the closest to that pricing I was able to find.)

Yes, their "Save 63%!!" banner reeks of hucksterism, but the bikes I bought genuinely were great values. As long as you know enough about bikes to install the handlebars and pedals and tune the brakes and gears, any bike you buy from them should be fine. Or just pay a shop to tune it up.

No weight listed, but might be under 20 lbs. You can always email them and ask which of their cross/gravel bikes are under 20 lbs.
Trakhak is offline  
Old 01-22-24, 10:00 PM
  #10  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,799

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,025 Times in 723 Posts
Originally Posted by Trakhak
Lowest weight for lowest price: there are probably other choices now, such as Canyon, but I bought my last two bikes from BikesDirect and have been happy with both. (I used to manage bike stores and got used to employee discounts for bikes. BikesDirect's bikes were the closest to that pricing I was able to find.)

Yes, their "Save 63%!!" banner reeks of hucksterism, but the bikes I bought genuinely were great values. As long as you know enough about bikes to install the handlebars and pedals and tune the brakes and gears, any bike you buy from them should be fine. Or just pay a shop to tune it up.

No weight listed, but might be under 20 lbs. You can always email them and ask which of their cross/gravel bikes are under 20 lbs.
I think that finding a sub-20lb bike with bikesdirect is going to be a tough search, and their gravity line is of cheaper quality and heavier weight that the motobecane line from what I've experienced. I fully enjoy my motobecane UNO and agree they can be a good value for the cost, but even the Ti bikes of theirs that I've built and weighted were fairly stout.

OP, least expensive is going to be a loaded question. With a modern hydraulic disc brake, scraping under that 20lb mark isn't always cheap or easy. Cross bikes are generally heavier to begin with being built with sturdier parts, but in the last few years a lot of brands have either moved to gravel with different less performance oriented geometry or bumped their complete bikes to ridiculous prices. Although it isn't what you're looking for, buying a frameset and building what you want might be the better way. Not certain what company has the lightest, but I'm guessing you'll clear 3k to get the under 20lb weight.
Russ Roth is offline  
Likes For Russ Roth:
Old 01-23-24, 06:24 AM
  #11  
t2p
Senior Member
 
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,098

Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1400 Post(s)
Liked 1,885 Times in 1,084 Posts
Originally Posted by Steve B.
I think the stock Cannondale Topstone carbons are under 20 lbs. They are a few pounds lighter than the aluminum’s, my ALU is 22-1/2 lbs. I would imagine with some light carbon wheels you would see 18. Also pay attention to the tires to get something light.
with some creative component swaps - my alum Topstone is 20.2 lbs … with original wheelset / Conti 700x40 Terra Speed tires and tpu tubes … ( it’s a XS size though )

Last edited by t2p; 01-23-24 at 06:28 AM.
t2p is offline  
Old 01-23-24, 11:37 AM
  #12  
Steve B.
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,885

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3242 Post(s)
Liked 2,086 Times in 1,181 Posts
With carbon wheels, some light tires, carbon bar, stem, seatpost and crank, you can get this bike near light enough to a standard carbon road bike. You have to shell out maybe $2000 or so over the cost of the bike though.
Steve B. is online now  
Likes For Steve B.:
Old 01-26-24, 09:05 PM
  #13  
SoSmellyAir
Method to My Madness
 
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,663

Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1948 Post(s)
Liked 1,471 Times in 1,020 Posts
Originally Posted by RH Clark
Who makes the least expensive sub 20 lb. bike that will handle at least 32mm but preferably slightly wider 700c tires. Just wondering if anything is out there even direct consumer that I am not aware of. I am less interested in group set than overall weight. I have no problem assembling a bike.
Probably Canyon (among the more well-known brands)?

But my first criteria would be fit / geometry.
SoSmellyAir is offline  
Likes For SoSmellyAir:
Old 02-10-24, 02:53 PM
  #14  
bluehills3149
Full Member
 
bluehills3149's Avatar
 
Join Date: Jun 2014
Location: Brooklyn USA
Posts: 401

Bikes: depends what week it is..

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Liked 59 Times in 47 Posts
Decathlon in Europe sell the VanRysel RCX cyclecross bike with a 1x11 GRX drivetrain that accepts 38mm tires and sells for 1600€ or about $1860. Claimed weight is 8.5kg or 18.7lb.
bluehills3149 is offline  
Likes For bluehills3149:
Old 03-13-24, 11:27 AM
  #15  
sean.hwy
Senior Member
 
sean.hwy's Avatar
 
Join Date: Jan 2020
Location: San Jose
Posts: 1,025

Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times in 201 Posts
You can buy a used Ibis Hakka for 2000 to 2700 ish. That frame is 1000g. The bike with a grx 1x setup came in at 18.2 lbs.

A few places have them on sale with sram for about 3500+ ish

If you fit the have a few Crux last year model on sale for $3500 just under 19lbs 4oz. sizes 56, 58, 61
https://www.specialized.com/us/en/cr...=336163-205813
sean.hwy is offline  
Likes For sean.hwy:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.