When there are large gaps in frame sizing...
#1
Senior Member
Thread Starter
Join Date: Oct 2017
Posts: 2,046
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,082 Times
in
522 Posts
When there are large gaps in frame sizing...
I'm 5'11", pretty average proportions. A 57cm is likely my ideal size, but I've never had one. My current Miyata is a 58 and it's just a tad big, but a shorter stem makes it fit just fine. I've been looking for a 1986 Schwinn Voyageur. It goes from 21" to 23". or ~53.34cm to 58.42cm. That's a pretty large gap. What do you default to? Bigger for a touring frame, smaller for racing? It's difficult when a bike you really want just doesn't come in your exact size. I've found a really nice one in 21" but probably will hold for a 23.
#2
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,650
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3091 Post(s)
Liked 6,601 Times
in
3,785 Posts
23"
Likes For cb400bill:
#3
"part timer"
Join Date: Oct 2008
Location: Tidewater VA
Posts: 622
Bikes: 1975 Raleigh Gran Sport, 1978 Bertin C35, 1982 Trek 614, 1983 Trek 620, 1984 Nishiki Seral, 1995 Mercian Ko’M, 1998 Fisher HKEK, 2000 Rivendell RS, 2001 Heron Touring, 2016 Nobilette Custom
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 160 Times
in
61 Posts
Likes For SuperLJ:
#4
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,650
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3091 Post(s)
Liked 6,601 Times
in
3,785 Posts
I'm a shade over 5'10" and ride this 23" very comfortably.
Likes For cb400bill:
Likes For seedsbelize:
#6
"part timer"
Join Date: Oct 2008
Location: Tidewater VA
Posts: 622
Bikes: 1975 Raleigh Gran Sport, 1978 Bertin C35, 1982 Trek 614, 1983 Trek 620, 1984 Nishiki Seral, 1995 Mercian Ko’M, 1998 Fisher HKEK, 2000 Rivendell RS, 2001 Heron Touring, 2016 Nobilette Custom
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 160 Times
in
61 Posts
I’m 5’11” and all my bikes are 59 or 60s. I proportionately have long legs / short torso though...
Likes For SuperLJ:
#7
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,488 Times
in
3,211 Posts
Likes For SurferRosa:
#8
Senior Member
I am 5’9” and my 88 is a 23”. I find it’s not a true 23 so it gives me some nice sizing for me. Bigger frames for touring I thought is the rule.
Likes For 3speedslow:
Likes For polymorphself:
#11
Senior Member
Join Date: Mar 2015
Location: Western MI
Posts: 2,770
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 656 Post(s)
Liked 469 Times
in
302 Posts
I’ve opined on this topic several times. At 6’1” I’m probably “supposed” to ride a 60cm. I fit that size fine but I only like it for a more leisurely pace. My go fast bikes end up being 57-59 and are much more responsive. I go to great lengths dialing in stems, bars, cranks and pillars so that my riding position feels the same on every bike.
Likes For plonz:
#12
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
my imagined ideal frame geo would have a seat tube of 57cm and top tube of 55-56cm. i've never seen one with that ST vs TT arrangement in less than large or x-large frames, so i deal with longer top tubes and use shorter stems. sometimes short reach bars, too
go large, marge!! besides larger frames absorb better regarding comfort
go large, marge!! besides larger frames absorb better regarding comfort
Last edited by thook; 06-10-20 at 09:07 PM.
Likes For thook:
#13
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#14
Senior Member
Thread Starter
Join Date: Oct 2017
Posts: 2,046
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,082 Times
in
522 Posts
Andy_K has a dozen or so 57cm, if you're measuring CTC. Heck, I've got a few 57's hanging in the Atelier.
1986 Schwinn Voyageur
84/85 Trek 720
Miyata 1000
Raleigh Super Course
Raleigh International
Peugeot PX60
1987 Peugeot Savoie (px531s)
Last edited by polymorphself; 06-10-20 at 07:33 PM.
#15
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,707
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1951 Post(s)
Liked 2,013 Times
in
1,112 Posts
For your racing attitude, go down. For sport/tourer, go up. I've convinced myself, without evidence, that larger bikes are too flexy or too heavy. I wish that I kept a really nice 24" TREK 710. But there is no way I'm buying that 24" TREK 760.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Likes For Classtime:
#16
Senior Member
Back when I was only 16 in 1974(!) my LBS carried Fuji - that came in 19, 21, 23, and 25" frame sizes. At only 5'8", I felt cramped fore-aft on the suggested 21" size frame so I went 23" (58.4cm) and never looked back. In retrospect, I probably could have swapped out a handlebar stem and been happy with a 21-inch frame, but that option was never suggested to me back then. Anyway, I prefer the long-reach type fit since I'm short legged and long of torso. Yeah, 'the boys' are a bit compromised if I try to stand flat-footed, but who does that anyway? That has never been an issue of 45+ years of riding my 'too-tall' 23" frame. yeah, and now I have picked up some 57cm frames... 56s would probably be ideal... but... I've grown to like the long toptube fit...
Likes For Cougrrcj:
#17
Senior Member
5'11" is fairly typical for a 23" or 58cm. How's the stand over now? Stand over the bike, pull both bike wheels up off the floor as far as it goes. What's the distance? (this is the typical the old school sizing method)
#18
Senior Member
Thread Starter
Join Date: Oct 2017
Posts: 2,046
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,082 Times
in
522 Posts
Pretty much, yeah that's it. BITD the way I was taught sizing was mostly stand over dependent. 1" to an inch and a half. At the 1" end was considered more touring, at the 1.5" end was more racing. You dealt with different body proportions by having multiple bike lines with differences in top tube length. Beyond that meant stem swapping etc.
5'11" is fairly typical for a 23" or 58cm. How's the stand over now? Stand over the bike, pull both bike wheels up off the floor as far as it goes. What's the distance? (this is the typical the old school sizing method)
5'11" is fairly typical for a 23" or 58cm. How's the stand over now? Stand over the bike, pull both bike wheels up off the floor as far as it goes. What's the distance? (this is the typical the old school sizing method)
Last edited by polymorphself; 06-11-20 at 12:29 AM.
#19
Senior Member
Join Date: Apr 2020
Posts: 331
Bikes: '68 Masi Special road, Grail bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 70 Times
in
58 Posts
when I first started working in bike shops in the early 70s. all brands came in 4 sizes.
19-21-23-25inch. then Italian bikes took over and they came 48 through 64.for 9 sizes
modern bikes come in small-medium-large or 3 sizes and I say WTF?
19-21-23-25inch. then Italian bikes took over and they came 48 through 64.for 9 sizes
modern bikes come in small-medium-large or 3 sizes and I say WTF?
Likes For steve sumner:
#20
Senior Member
#21
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,488 Times
in
3,211 Posts
#22
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,828
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
I'm 5'11", pretty average proportions. A 57cm is likely my ideal size, but I've never had one. My current Miyata is a 58 and it's just a tad big, but a shorter stem makes it fit just fine. I've been looking for a 1986 Schwinn Voyageur. It goes from 21" to 23". or ~53.34cm to 58.42cm. That's a pretty large gap. What do you default to? Bigger for a touring frame, smaller for racing? It's difficult when a bike you really want just doesn't come in your exact size. I've found a really nice one in 21" but probably will hold for a 23.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Last edited by shoota; 06-12-20 at 01:42 PM.
#23
Senior Member
Hmmmmmmmmmmmmmmmmmm................................ 54.5cm / 21-1/2" ********************?/