Why carry a multi tool?
#76
Senior Member
Join Date: Jan 2016
Location: 961' 42.28° N, 83.78° W (A2)
Posts: 2,344
Bikes: Mongoose Selous, Trek DS
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 941 Post(s)
Liked 319 Times
in
189 Posts
Myself as well, sort of. I only have two bikes. Both have identical wheel size, tires, tubes, etc. so carry tools are identical and I just move the seat post and top tube bag form bike to bike. I have handlebar camera bag and a bracket on each bike so it too swaps easily. I do carry a multi-tool, always have. Rarely used. I carry a two Allen wrenches in the top tube bag, one of which has seen the most use, for seat adjustments.
#77
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,632
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4730 Post(s)
Liked 1,531 Times
in
1,002 Posts
For a minimalist tool option, if you choose to carry one at all, I typically recommend the Tom7 from SKS. Nice little pouch, good steel.
2.5, 3, 4, 5, 6mm,T25 and a Phillips
2.5, 3, 4, 5, 6mm,T25 and a Phillips
Likes For Sy Reene:
#78
Full Member
I carried a full complement of tools. Then I thought it was a bit overkill, took out the chain tool. A week later someone was disabled on the bike trail with a broken chain, I could have taken out two links and got them going. I put the chain tool back in my kit. I don't mind the weight, just having to take the trunk bag off when the bike is chained at the library, but I would have to do that anyway to keep just the bag from being stolen.
I carried individual tools, but when buying a used trunk bag at goodwill, there was a Topeak bike multitool inside, super bonus. Now I carry that.
That Rocket Ratchet above looks really slick, I might check into that. But I can't recall a road event that would need the speed of a ratchet versus just a wrench. My most common road maladies and tools required:
EDIT: I'm really impressed with Topeak over the years in terms of innovation, those folks are thinking. But that tiny torque wrench from Feedback looks slick. However I have never needed a torque wrench on the trail, I can approximate things pretty good. The main thing I use a torque wrench for is the bolt holding the rear cassette body to the axle, that needs to be right on. For at home, Harbor Freight sells click-stop torque wrenches for 1/4", 3/8", 1/2" drive, on sale all the time for $10 (regular $30 but this is a "loss leader" to get you in the store), and believe it or not, they are not bad, they work. Only once, the calibration ring came loose on one, and I thought for a minute, then adjusted the calibration ring so the spring just engaged when the dial was at zero; I later checked against another wrench, it was right on.
I carried individual tools, but when buying a used trunk bag at goodwill, there was a Topeak bike multitool inside, super bonus. Now I carry that.
That Rocket Ratchet above looks really slick, I might check into that. But I can't recall a road event that would need the speed of a ratchet versus just a wrench. My most common road maladies and tools required:
- Flat tire; Tire levers, sticky patches, spare tube, pump. I also have nutted axles so need a wrench, I carry a small adjustable one.
- Broken spoke; Spoke wrench to retrue to make it home. I also carry spare spokes but if it's on the cassette side, I won't have the tools, a lockring tool and big enough wrench is just too much weight.
- Loose crank; Correct size allen wrench.
- Loose pedal; adjustable wrench.
- Broken chain: Chain tool.
- Front derailleur limit off adjustment; Small phillips screwdriver. Note: This can also help you get home if the cable breaks so you can adjust it into the right ring.
- Broken derailleur cable: Spare cable and cutters (yes you could coil the cable end but I carry one long enough for the rear derailleur so that's a lot of excess for the front), or limp home as noted above.
- Massive pothole bends side of rim; For the axle nuts, I carry an adjustable wrench, and that doubles to bend the rim back out or in.
EDIT: I'm really impressed with Topeak over the years in terms of innovation, those folks are thinking. But that tiny torque wrench from Feedback looks slick. However I have never needed a torque wrench on the trail, I can approximate things pretty good. The main thing I use a torque wrench for is the bolt holding the rear cassette body to the axle, that needs to be right on. For at home, Harbor Freight sells click-stop torque wrenches for 1/4", 3/8", 1/2" drive, on sale all the time for $10 (regular $30 but this is a "loss leader" to get you in the store), and believe it or not, they are not bad, they work. Only once, the calibration ring came loose on one, and I thought for a minute, then adjusted the calibration ring so the spring just engaged when the dial was at zero; I later checked against another wrench, it was right on.
#79
Senior Member
That looks great, and a fantastic price (currently $20 online). The main weakness I see is no outside-hex wrenches. I carry a three-way 8/9/10mm wrench (although the bike is all allen-head bolts, but helpful to others) and a thin 14/15mm for axle nuts and pedals, and a small adjustable wrench for the other side of the axle. On a road bike with quick release axles, I could ditch the adjustable wrench. But on my townie with axle nuts and a big trunk bag, I go big.
#80
Senior Member
"I suppose...", said Eeyore. That might conflict with my goal to get a lockring with a thicker flange to prevent the chain from getting jammed between the lockring and frame, though that happens very rarely. (And I got a spacer washer to space out the cassette, but decided against as that, or a spacer under the lockring, as either would reduce lockring thread engagement.)
Likes For Duragrouch:
#81
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
That looks great, and a fantastic price (currently $20 online). The main weakness I see is no outside-hex wrenches. I carry a three-way 8/9/10mm wrench (although the bike is all allen-head bolts, but helpful to others) and a thin 14/15mm for axle nuts and pedals, and a small adjustable wrench for the other side of the axle. On a road bike with quick release axles, I could ditch the adjustable wrench. But on my townie with axle nuts and a big trunk bag, I go big.
Fortunately, the old QR skewers are their own tools. One less thing to carry separately. But if I ever get a disc brake bike I'll need a larger bag than my Lezyne Road Caddy.
#82
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
I have had many multi tools, but none as useful as my Cool Tool. Unfortunately, a piece fell out of the crescent wrench part after a few seasons and most of the other parts have since wandered away. I still occasionally see a 6mm allen key with a Philips head drift past when I rummage through my parts bin.
#83
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2761 Post(s)
Liked 2,535 Times
in
1,433 Posts
I use my multi-tool way more than I fix flats.
Should I stop carrying a pump?
Should I stop carrying a pump?
#84
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,467
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4335 Post(s)
Liked 3,958 Times
in
2,646 Posts
I carry one in my pocket most of the time and generally always try to carry one while riding. I don't use it super often but do use it on occasion. I wouldn't want to go without one. Sure a lot of stuff can be punctures but those times when they are not or if you might be running non-qr skewers or thru-axles or maybe a bolt is loose or something knocks the stem out of whack especially on a quill stem. You never know what you might run into.
I wouldn't take a ton of tools but my Crank Bros M10 is a super handy tool and has gotten me out of a few pickles.
I wouldn't take a ton of tools but my Crank Bros M10 is a super handy tool and has gotten me out of a few pickles.
#86
Senior Member
You can fix lots of things with it. Including a frayed cable (you can replace the cable if you have one, which I do on multi-day rides). I usually carry a allen, screwdriver, chain-tool one, and a swiss army type one.
I've used it a lot of times: loose bottle cages, improvising a fix when a cable broke, fixing a broken chain (you need a chain-tool, like the one any decent multi tool has), and even bent back a firend derailleur hanger with the multi tool pliers once. He fell on the first day of a 4 days ride, and after that the derailleur interfered with the spokes.
On multi day rides I also carry a replacement derailleur hanger, shifter cable, a couple of spare brake pads and 4 or 5 zip ties. You can fix almost anything with a zip tie, and they weight next to nothing. Not that I care about weight, since I don't race and don't really care about comparing myself to others.
I know people who don't carry one. All of them have had to call a relative to pick them up at least once.
I only called my wife once, when I got sick. Never had to do it for a mechanical issue.
I've used it a lot of times: loose bottle cages, improvising a fix when a cable broke, fixing a broken chain (you need a chain-tool, like the one any decent multi tool has), and even bent back a firend derailleur hanger with the multi tool pliers once. He fell on the first day of a 4 days ride, and after that the derailleur interfered with the spokes.
On multi day rides I also carry a replacement derailleur hanger, shifter cable, a couple of spare brake pads and 4 or 5 zip ties. You can fix almost anything with a zip tie, and they weight next to nothing. Not that I care about weight, since I don't race and don't really care about comparing myself to others.
I know people who don't carry one. All of them have had to call a relative to pick them up at least once.
I only called my wife once, when I got sick. Never had to do it for a mechanical issue.
Last edited by Amt0571; 01-07-20 at 07:37 AM.
#87
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
I can't believe anyone rides WITHOUT one. I've had cleats comes loose, thru axles come loose, my buddy's water bottle cage bolts came loose on our last ride. I've used the flathead screwdriver to pick out peanut butter mud from my shoes and pedals. I can only imagine I'll need it in the future for all sorts of things as well..
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#89
Senior Member
I am the most unfortunate person in the world when it comes to flats, I always find a way to run over a tiny piece of glass or a tiny hunk of wire on the ground. That said I ride with a person who has not had a flat out on the rode for years, they might consider not bringing tubes, patch kit or frame pump along since "They never use it". I find having a multi tool very important, I once had my saddle start to rattle a bit, I got off the bike, checked it and it was ready to fall off. I used my multi tool and was back on the road. I have used a multi-tool on rides to tighten up another persons rim brake attachment and tighten a seat post as well. Within reason I like to be able to help someone out who's stuck but no, I'm not carrying a bike stand with me on a ride. I don't think the weight / space penalty to be that significant that I'm going to toss the multi tool out of my saddle bag ever.
#90
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,962
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4930 Post(s)
Liked 8,063 Times
in
3,811 Posts
I've used a multi-tool more times than I can count, on my bike and others, including this past Sunday morning to make a small seat post height adjustment (final tweak after installing a new saddle). It scares me to ride without one. That's guaranteed to be the time you need it most.
#91
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
I needed my shorty Hero Kit multi tool a couple of days ago on a test ride after installing a new saddle. Sure thought I'd cranked the bolt snug but it worked loose. First time that's happened to me.
The short bit cleared my rear mounted video camera. My longer multi tool wouldn't.
The short bit cleared my rear mounted video camera. My longer multi tool wouldn't.
#92
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,162
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 862 Post(s)
Liked 1,195 Times
in
687 Posts
I carry one of these. At 92 grams and extremely small, I like it.
Yes I've had reason to use it. Most recently on a rim brake pivot bolt.
Even has a chain tool.
Topeak Ninja 16
OH and if you're in CA.... Many don't know AAA will come get you and your bike. Really - https://calstate.aaa.com/membership/...p=not_assigned
Told you so !
Yes I've had reason to use it. Most recently on a rim brake pivot bolt.
Even has a chain tool.
Topeak Ninja 16
OH and if you're in CA.... Many don't know AAA will come get you and your bike. Really - https://calstate.aaa.com/membership/...p=not_assigned
Told you so !
Last edited by Barry2; 01-08-20 at 02:36 PM. Reason: AAA
Likes For Barry2:
#93
Strong Walker
mechanicals i had myself included loose bolts on chainwheels, stems, seatposts, bottlecages.. boken chains... all of which a multitool can be used fixing. Then, there is a chance you might meet some other person with a bike not as well maintained as your own.
#95
Frontiers...
#96
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,632
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4730 Post(s)
Liked 1,531 Times
in
1,002 Posts
Taken out of context. He said he doesn't carry a tool because he feels he's never needed one for himself. I think it a stretch to imply he should start carrying a tool out of common courtesy for others who haven't brought their own tool with them.
#97
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
I'm not sure if I have a multi tool in my flat tire bag or not. I can tell you I haven't missed it. I have started carrying a tiny needle nose pliers for finding and pulling out those pesky steel belt radial wires.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#98
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,632
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4730 Post(s)
Liked 1,531 Times
in
1,002 Posts
Yeah.. getting those buggers out is a pain. Looking at some rubber tipped jewelry/hobby tweezers for this purpose. Really though only need something 2-3" long, but can't find anything less than 5". Nail clippers might work if dulled on the cutting edge.
#99
Frontiers...
My point was, if you have water, band-aid or multi-tool with you, and you see a fellow rider in distress, it's a common courtesy to stop and ask if they need help.