SRAM Rival 1 chainring swap
#1
Senior Member
Thread Starter
Join Date: Nov 2019
Location: Iowa
Posts: 682
Bikes: 2021 Salsa Fargo 1x12, 2019 Jamis Renegade Exploit 1x11. Motobacne NX Fat Tire
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 332 Times
in
170 Posts
SRAM Rival 1 chainring swap
Purchased my wife a Rove ST with the 1x11 drivetrain, it has a Rival 1 40t chainring. I’d like to swap that out for a 36t or 34t for her (will shorten chain if needed). What’s the best approach? I know I can get a GXP direct mount ring but than I need to remove the whole crankset. Are there standard 34 or 36t chainrings that can mount directly to the Rival 1 spider?
will this directly mount to the existing spider? 110 bcd
https://www.competitivecyclist.com/s...NDYXQxMDA0NzA=
will this directly mount to the existing spider? 110 bcd
https://www.competitivecyclist.com/s...NDYXQxMDA0NzA=
Last edited by Toadmeister; 04-07-20 at 06:42 PM.
#2
Full Member
That ring is the inner ring for a double chain ring crank. For a 1 by you need a x-sync (narrow- wide) chain ring like this. https://www.jensonusa.com/SRAM-X-Sync-Road-1X-Chainring
#3
Senior Member
Thread Starter
Join Date: Nov 2019
Location: Iowa
Posts: 682
Bikes: 2021 Salsa Fargo 1x12, 2019 Jamis Renegade Exploit 1x11. Motobacne NX Fat Tire
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 332 Times
in
170 Posts
Can I do a direct mount GXP chainring? What kind of offset should I get?
https://www.jensonusa.com/Wolf-Tooth...or-SRAM-Cranks
Yes, I’d have to remove the crankset to install, but not a biggie.
https://www.jensonusa.com/Wolf-Tooth...or-SRAM-Cranks
Yes, I’d have to remove the crankset to install, but not a biggie.
#4
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,691
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 430 Post(s)
Liked 460 Times
in
318 Posts
Can I do a direct mount GXP chainring? What kind of offset should I get?
https://www.jensonusa.com/Wolf-Tooth...or-SRAM-Cranks
Yes, I’d have to remove the crankset to install, but not a biggie.
https://www.jensonusa.com/Wolf-Tooth...or-SRAM-Cranks
Yes, I’d have to remove the crankset to install, but not a biggie.
Likes For tFUnK: