Drunk build thread - hot summer Monark 90320 Super Continental
#1
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Tipsy build thread - hot summer Monark 90320 Super Continental
I have had my fair share of Crescent 92320 and Monark 90320 thru the years. They are somewhat of a staple vintage race bike over here in Sweden. I believe this is my 19: th...
Before getting this frame I have not had one in the collection for many years. I could not resist it when it came up for sale for a song at a local bike site. The pictures showed a untouched 90320 frame in splendid condition. Missing a rivet for the Monark headbadge and it had only a Campagnolo headset forkrace mounted. I checked my inventory and realized I had all the parts needed and nothing better to put them on for now.
Got it home and gave it a good rub and wax treatment. The paint and decals are very nice! I will not even touch up the small paint chips there are. My experience with these bikes tells me this one was made when the builder had a somewhat good day. It is better than 95% of the ones I have had and seen. This still puts it at the bottom in build finish when compared to the rest of my collection. Telling it like it is - will not make me popular among my fellow countrymen... A competent race bike but no Mona Lisa.
I put this frame as an early 70ies based (losely) on its serial, and set of decals. And I will build it as such.
It will be a nice complement to my Masi "Monark" Ferretti team bike - sort of a brother from another mother (and father)... ;-)
Rub and wax
Luckily I had an extra rivet for the headbadge
Cleaned up mostly NOS headset parts (English thread) and a NOS BB (thick rifled cup, French thread, 120 axle).
Long version
Parts put on - together with a wheelset that is going on another bike - but they look the same as the ones for this build.
NOS Mafac Racer, NOS Record seatpost, a very good condition Idealé 90 and an OK Silca with Campagnolo head
Will see what happens tomorrow. It is hot over here. Lot of Pims and mint juleps under the apple tree...
Before getting this frame I have not had one in the collection for many years. I could not resist it when it came up for sale for a song at a local bike site. The pictures showed a untouched 90320 frame in splendid condition. Missing a rivet for the Monark headbadge and it had only a Campagnolo headset forkrace mounted. I checked my inventory and realized I had all the parts needed and nothing better to put them on for now.
Got it home and gave it a good rub and wax treatment. The paint and decals are very nice! I will not even touch up the small paint chips there are. My experience with these bikes tells me this one was made when the builder had a somewhat good day. It is better than 95% of the ones I have had and seen. This still puts it at the bottom in build finish when compared to the rest of my collection. Telling it like it is - will not make me popular among my fellow countrymen... A competent race bike but no Mona Lisa.
I put this frame as an early 70ies based (losely) on its serial, and set of decals. And I will build it as such.
It will be a nice complement to my Masi "Monark" Ferretti team bike - sort of a brother from another mother (and father)... ;-)
Rub and wax
Luckily I had an extra rivet for the headbadge
Cleaned up mostly NOS headset parts (English thread) and a NOS BB (thick rifled cup, French thread, 120 axle).
Long version
Parts put on - together with a wheelset that is going on another bike - but they look the same as the ones for this build.
NOS Mafac Racer, NOS Record seatpost, a very good condition Idealé 90 and an OK Silca with Campagnolo head
Will see what happens tomorrow. It is hot over here. Lot of Pims and mint juleps under the apple tree...
Last edited by styggno1; 01-07-22 at 12:15 PM.
Likes For styggno1:
#2
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,749
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 672 Times
in
420 Posts
Beautiful Bike !
#3
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
I am too lazy and too cheap for this level of excellence, but I dig what you're doing. Subscribing!
Likes For non-fixie:
#4
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
I would better add that I got all parts, except the frame of course, for this build in the 80ies and 90ies... The Mafac boxes where laying in the hundreds at a shop here in Stockholm. "Take 5 and pay for one!" Same with the seatpost. At one time I believe I bought 10 or 15 of those too. Knowing this - please consider this build a budget build. I was on a budget back then - these were cheap parts for a long time.
Last edited by styggno1; 06-26-20 at 04:46 AM. Reason: spelling...
Likes For styggno1:
#5
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,833 Times
in
2,229 Posts
A chandy is nice on a hot summer day.
Pims, but substitute a nice mint tea. Sun 'cured' tea not boiled. For summer heat endurance.
Nice parts bin.
And LOVE the colourful frame. With wide tan walls.
Good taste extended to brands less 'enshrined' is respectful of the heritage, in this case. I would put my Falcon in that category, perhaps for the company's longevity. Billato perhaps for an Italian.
But be careful when riding it, you are marked - as a staple vintage racer - to kickback a phrase.
Pims, but substitute a nice mint tea. Sun 'cured' tea not boiled. For summer heat endurance.
Nice parts bin.
And LOVE the colourful frame. With wide tan walls.
Good taste extended to brands less 'enshrined' is respectful of the heritage, in this case. I would put my Falcon in that category, perhaps for the company's longevity. Billato perhaps for an Italian.
But be careful when riding it, you are marked - as a staple vintage racer - to kickback a phrase.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#6
Semper Fi
Join Date: Jan 2008
Posts: 12,942
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 358 Times
in
241 Posts
Subscribed, good to see another Swedish themed build, and direct for Sweden too
Bill
Bill
__________________
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Likes For qcpmsame:
Likes For jackbombay:
#9
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,700 Times
in
936 Posts
Gin & Tonic #1 - refreshing!
Gin & Tonic #2 - This is going well
Gin & Tonic #3 - I'm really good at this
Gin & Tonic #4 - what's this for???
Gin & Tonic #5 - ummm...
Gin & Tonic #6 - where's my ******g hammer?!?
Gin & Tonic #2 - This is going well
Gin & Tonic #3 - I'm really good at this
Gin & Tonic #4 - what's this for???
Gin & Tonic #5 - ummm...
Gin & Tonic #6 - where's my ******g hammer?!?
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#10
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Today I got into hard liquor. I sort of had to. Cleaning part is tedious work. It gets better with "Gammel dansk" (Old Dane). Did I mention I am on holiday?
Saddle and post in place with a Mafac brake cable stop at the seat bolt. A Campagnolo pump peg and cable clips. Saddle height is unadjusted.
NOS 175mm crank with NOS "no peg" big ring, slightly used small ring.
Sorry - my wife calls on me for the evening drinks in the garden...
Saddle and post in place with a Mafac brake cable stop at the seat bolt. A Campagnolo pump peg and cable clips. Saddle height is unadjusted.
NOS 175mm crank with NOS "no peg" big ring, slightly used small ring.
Sorry - my wife calls on me for the evening drinks in the garden...
Last edited by styggno1; 06-26-20 at 03:06 PM.
#11
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Mojitos got me thru this day.
I had to tidy up an early 3ttt Record stem.
Two mojitos later it looked better.
An early non anodized 3ttt bar to match. I noticed the bulge being a bit off center and had to set it up 3 mm to the left to get the bar centered. The camera angle makes it look more than it is.
Clean and restored 1971 NR derailleur - new springs for both the parallellogram and the chain tension. And some other small bits an pieces.
NOS Regina Oro chain and freewheel. TA bottle holder. Record pedals, Christophe clips and M.A.C straps.
Total 5 Mojitos. A good day.
Only the brakes, levers and some red cotton bar wrap left for tomorrow.
I had to tidy up an early 3ttt Record stem.
Two mojitos later it looked better.
An early non anodized 3ttt bar to match. I noticed the bulge being a bit off center and had to set it up 3 mm to the left to get the bar centered. The camera angle makes it look more than it is.
Clean and restored 1971 NR derailleur - new springs for both the parallellogram and the chain tension. And some other small bits an pieces.
NOS Regina Oro chain and freewheel. TA bottle holder. Record pedals, Christophe clips and M.A.C straps.
Total 5 Mojitos. A good day.
Only the brakes, levers and some red cotton bar wrap left for tomorrow.
Last edited by styggno1; 06-27-20 at 12:41 PM.
Likes For styggno1:
#12
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
Drinking.....so it started as a Midsommar build ???? I seem to recall (barely) O.P. Anderson and Beska Droppar being involved the one midsummer i did near Göteborg many years ago
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#13
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Well - today I finished the Monark Super Continental 90320. This was an easy build. The frame came almost ready for build up. Just a good cleaning and waxing - some small detailing. The parts I already had and even if I had to clean and polish some of them - this was a walk in the park. One could argue that after 18-19 of these Monark/Crescents it should be easy but you would never know. Things turn up that you do not reckon with. With this one it was the NOS Mafac brakeset. The levers were for a handlebar of another diameter. I had to source parts to get it working. Luckily I have a stash of parts to draw from - but it took a couple of hours to find them and get it right.
Mafac: s in general is not something I have a great experience of. I have always had a stash of long reach (formerly know as normal reach) Campagnolo Record brakes that I have used when building these bikes. This time I wanted to use the Mafac Racer set. It was a charm to set up after the debacle with the levers.
I went with red cotton wrap, which is both "catalogue correct" and otherwise fitting the bike´s colour scheme. I wrapped it as the mechanics at the time did - over the half hoods. There was a reason why they did it like this. It holds the rubber hood in place better. I have built this bike as a racer - which explains the brakelever positioning. This was the way they were supposed to be positioned (on a racer). And at my age (56) I am still flexible enough for it to work.
This was a short build thread but I hope you have enjoyed it. Even if I have some problems with the frame build finish - there is no way around the fact that this bike´s exact likes were ridden to both amature world championships and olympic medals by the Fĺglum-Pettersson brothers. A circa 50 year old Swedish classic in very good condition - resurrected and saved for the future.
And I have lost some brain cells during the build - but I have had fun!
PS - had a nice dinner with my wife and my brother and his wife - to celebrate the bike´s finished build. I hereby declare they could not care less. "Oh - you have built yet another bike..."!
I am used to it. And I guess I am the abnormal one.
Last edited by styggno1; 06-28-20 at 05:50 PM.
Likes For styggno1:
#14
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Took it for a 50 km sort out trip today. Worked as a charm. Raised the stem 1 cm (so much for my statement about being flexible...). Took some pictures in the sun.
This bike makes me happy.
This Monark/Crescent (MCB) does not suffer from the infamous toe clip overlap at 59 cm frame, 175 mm cranks and large clips. There is a millimeter to spare. As I wrote earlier - this frame was built on a good day.
This bike makes me happy.
This Monark/Crescent (MCB) does not suffer from the infamous toe clip overlap at 59 cm frame, 175 mm cranks and large clips. There is a millimeter to spare. As I wrote earlier - this frame was built on a good day.
Last edited by styggno1; 07-02-20 at 06:38 AM.
Likes For styggno1:
#15
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,781
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,097 Times
in
913 Posts
Very pretty build! I congratulate you on getting all the parts in the proper place. I once did an alcohol fueled build and put the crank on backwards.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#16
Senior Member
Join Date: Nov 2010
Location: Magnolia State, 100° with 110% humidity
Posts: 1,230
Bikes: American, Italian, and Japanese.. in no particular order.
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 276 Times
in
128 Posts
Very nice.. The bike and wrap are so vibrant. Beautiful, beautiful build..
#17
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
That turned out beautifully!
Nice to be able to see what new MAFAC brakes look like. Which is very clean, rather than highly polished. Thought as much.
Nice to be able to see what new MAFAC brakes look like. Which is very clean, rather than highly polished. Thought as much.
#18
Senior Member
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
drinking ftw!
what’s your polishing method on the stem and etc? (other than sipping mojitos?) looks gorgeous after!!!
what’s your polishing method on the stem and etc? (other than sipping mojitos?) looks gorgeous after!!!
#19
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Mojitos and sweat does the rest. I take care not grinding at corners or otherwise altering the form of the item.
Last edited by styggno1; 07-05-20 at 06:55 AM.
Likes For styggno1:
#20
Senior Member
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
Thank you! My "method" is handheld 320, 480, 600, 800, 1000, 1200, 1500, 2000, 2500 grit wet sandpaper in that order - then a polishing compound called Autosol (mildly abrasive). With the stem I stopped at 1000 or 1200 grit as they were not polished to perfection originally.
Mojitos and sweat does the rest. I take care not grinding at corners or otherwise altering the form of the item.
Mojitos and sweat does the rest. I take care not grinding at corners or otherwise altering the form of the item.
#21
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
The Crescent ads from the 70ies have got quite a following. Crescent and Monark bikes at this time was the same apart from the decals - the two brands joined forces in the early 60ies.
I believe the "cyclists" to be very different though. Today this would not "fly" here in Sweden but at the time it did. All over the world...
I must say I am partial in Monarks favour. In 1972 I was 8 years old though and did not contemplate on girls at all. The models, if they were 20-21 at the time, would be about 70 years old today I guess. I hope they are well and live a good life. Their old modeling career choices still make me smile.
And then to a totally different Monark girl. On the cover page of an old Swedish bike magazine - Anna-Karin Johansson riding for CK Ceres (a renowned bicycling club in Sweden). This is the real deal Monark girl. Three times Swedish champion.
I believe the "cyclists" to be very different though. Today this would not "fly" here in Sweden but at the time it did. All over the world...
I must say I am partial in Monarks favour. In 1972 I was 8 years old though and did not contemplate on girls at all. The models, if they were 20-21 at the time, would be about 70 years old today I guess. I hope they are well and live a good life. Their old modeling career choices still make me smile.
And then to a totally different Monark girl. On the cover page of an old Swedish bike magazine - Anna-Karin Johansson riding for CK Ceres (a renowned bicycling club in Sweden). This is the real deal Monark girl. Three times Swedish champion.
#22
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,528
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1507 Post(s)
Liked 3,478 Times
in
1,132 Posts
Brent
#23
Senior Member
The Crescent ads from the 70ies have got quite a following. Crescent and Monark bikes at this time was the same apart from the decals - the two brands joined forces in the early 60ies.
I believe the "cyclists" to be very different though. Today this would not "fly" here in Sweden but at the time it did. All over the world...
I must say I am partial in Monarks favour. In 1972 I was 8 years old though and did not contemplate on girls at all. The models, if they were 20-21 at the time, would be about 70 years old today I guess. I hope they are well and live a good life. Their old modeling career choices still make me smile.
And then to a totally different Monark girl. On the cover page of an old Swedish bike magazine - Anna-Karin Johansson riding for CK Ceres (a renowned bicycling club in Sweden). This is the real deal Monark girl. Three times Swedish champion.
I believe the "cyclists" to be very different though. Today this would not "fly" here in Sweden but at the time it did. All over the world...
I must say I am partial in Monarks favour. In 1972 I was 8 years old though and did not contemplate on girls at all. The models, if they were 20-21 at the time, would be about 70 years old today I guess. I hope they are well and live a good life. Their old modeling career choices still make me smile.
And then to a totally different Monark girl. On the cover page of an old Swedish bike magazine - Anna-Karin Johansson riding for CK Ceres (a renowned bicycling club in Sweden). This is the real deal Monark girl. Three times Swedish champion.
Likes For Narhay:
#24
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,015
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 802 Times
in
391 Posts
Thanks for the coolest build thread I've seen in a while. And know that there's a little bit of Monark envy over here in the Arizona desert. Nicely done.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Likes For Fahrenheit531: