GT triple triangle frame thread
#226
Senior Member
the All-Terra was there originally but i touched it up . It really made a difference in the looks dept.
Now i need to get the 1988 Avalanche done!
__________________
#227
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Thanks for the info T-Mar I wasnt sure if it was original or not as i am assuming this is a Late 1988 build since its Red and according to the 1988 Catalog that was not a color option. Did it still have the cable crossover just without the guide in 1988?
the All-Terra was there originally but i touched it up . It really made a difference in the looks dept.
Now i need to get the 1988 Avalanche done!
the All-Terra was there originally but i touched it up . It really made a difference in the looks dept.
Now i need to get the 1988 Avalanche done!
The crossover cable guide was a popular aftermarket upgrade because Mountain Bike Action magazine voted it one of the Top 20 ATB innovations for 1989. It was ranked 3rd, behind Nishiki's elevated chainstays and Fisher's Evolution headset but ahead of many revolutionary products, such as Shimano's Hyperglide and Rock Shox's suspension forks.
#228
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,265
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 883 Post(s)
Liked 823 Times
in
622 Posts
So I had a few people offer me a couple of GT’s. in fact I got a GT Aggressor 3.0 All Terra for my dad’s friend. Anyway here’s a Zaskar Race frame that I’m contemplating on buying but he’s asking for a chunk of change (groupset not included).
I’m still contemplating cause to build it up will cost me similar or more than a used Specialized Rockhopper 27.5.
What do you guys think?
I’m still contemplating cause to build it up will cost me similar or more than a used Specialized Rockhopper 27.5.
What do you guys think?
#229
Senior Member
I stated 1988 because the components looked like Deore, as opposed to Mountain LX which was spec'd in 1989, which was also the last year for thumshifters on the Karakoram. 1988 used a standard yoke cable that went around the seat tube, without crossing-over. The serial number may provide more confidence, one way or the other.
The crossover cable guide was a popular aftermarket upgrade because Mountain Bike Action magazine voted it one of the Top 20 ATB innovations for 1989. It was ranked 3rd, behind Nishiki's elevated chainstays and Fisher's Evolution headset but ahead of many revolutionary products, such as Shimano's Hyperglide and Rock Shox's suspension forks.
The crossover cable guide was a popular aftermarket upgrade because Mountain Bike Action magazine voted it one of the Top 20 ATB innovations for 1989. It was ranked 3rd, behind Nishiki's elevated chainstays and Fisher's Evolution headset but ahead of many revolutionary products, such as Shimano's Hyperglide and Rock Shox's suspension forks.
the SN is T88011445
__________________
#230
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
#231
Senior Member
#232
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Thanks T-Mar . It is definitely a 1988 model the graphics and Deore are 1988 specs. I will make the changes to the straddle cable. would like to keep it close to 1988 specs.
the SN is T88011445
the SN is T88011445
#234
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
1988 Karakoram advertising, clearing showing showing no crossover cable guide.
#235
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,733
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,404 Times
in
1,205 Posts
Likes For rccardr:
#236
Senior Member
#238
Senior Member
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631
Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times
in
166 Posts
Refurbished and sold this GT Force steel road bike this winter. Kinda wanted to keep it, but had bought it to flip, and no room in the stable.
#239
Senior Member
Join Date: Oct 2016
Location: Cambridge UK
Posts: 852
Bikes: 1903 24 spd Sunbeam, 1927 Humber, 3 1930 Raleighs, 2 1940s Sunbeams, 2 1940s Raleighs, Rudge, 1950s Robin Hood, 1958 Claud Butler, 2 1973 Colnago Supers, Eddie Merckx, 2 1980 Holdsworth, EG Bates funny TT bike, another 6 or so 1990s bikes
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 332 Times
in
185 Posts
Surprisingly responsive/comfortable
Found abandoned no wheels, fixed as a winter hack/rain bike and was very surprised at how well it went. Like it so much I did about 2000 miles on it so have done a much deserved full service with no major issues.
Likes For Johno59:
#240
Full Member
Join Date: Oct 2010
Posts: 212
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Liked 33 Times
in
20 Posts
Just picked this up over the weekend. Not all original as the seller rebuilds and sells used bikes. But it's all functional and in pretty good shape. It's an Avalanche 3.0 (non-disc) and from what I can tell it's a 2010 model. I'm going to build another set of wheels so it'll be dual purpose casual and off-road rider. this will be the third GT I've owned and the second one in my stable currently.
#241
Lurker
I recently decided I needed a fat-tire bike to ride on the beach. And since I’m a “why buy it when you can build it” kinda guy, with boxes of vintage componentry, I decided to pull the old Talera frame down from the rafters and base the build around it.
I also wanted to try the new Sturmey Archer drum brake hubs, so I bought a pair of them, some Sun MTX33 rims, and some spokes, and laced ‘em all up.
My preliminary measurements told me the absolute fattest tire I could probably fit would be a 26 x 2.8. So I bought a set of WTB Rangers in 2.8 width, which are really 559 x 67. And they fit - just. I need to work a little harder on truing the wheels, and I need to do a small amount of dimpling in the rear, but they just fit.
The Sturmey Archer hubs feel sturdy, turn smoothly, and look super-cool. I’m excited!
I also wanted to try the new Sturmey Archer drum brake hubs, so I bought a pair of them, some Sun MTX33 rims, and some spokes, and laced ‘em all up.
My preliminary measurements told me the absolute fattest tire I could probably fit would be a 26 x 2.8. So I bought a set of WTB Rangers in 2.8 width, which are really 559 x 67. And they fit - just. I need to work a little harder on truing the wheels, and I need to do a small amount of dimpling in the rear, but they just fit.
The Sturmey Archer hubs feel sturdy, turn smoothly, and look super-cool. I’m excited!
__________________
1987 Nishiki Prestige (now 650B!)
1981 Trek 710
198? Nishiki Olympic 12 mixte (now 650B!)
2020 Surly Troll fat-tire build
1987 Nishiki Prestige (now 650B!)
1981 Trek 710
198? Nishiki Olympic 12 mixte (now 650B!)
2020 Surly Troll fat-tire build
Likes For ctmullins:
#242
Senior Member
Just rescued !
Needs a good going over...need tires , pads ,seat and maybe shifters
Likes For Night Treker:
#243
Senior Member
Cleaned up a little...new tires ( the only ones i could get quick "thanks corona") new seat and some pads
#245
Junior Member
GT Timberline Anatomica. Bike was just abandoned at the apartment complex where I work . Everything is in good shape ,nothing needed to be renewed or restored . I really enjoy riding this bike , it seems to be well made.
Likes For griffey:
#246
Useless Member
Join Date: Jun 2015
Location: Louisville, KY
Posts: 745
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Liked 181 Times
in
113 Posts
Built this one up and gave it to my buddy as a birthday present..... He was happy me thinks....
USA frame number 1073, a very early one. I built it up with 100% 600 Ultegra 8 speed, all NOS out of the box. H Son Plus rims.. I don't even want to think what I have in this bike, but a good bud is worth it all day long.
The decals are custom, so don't let that throw you off. It was a tribute to him.
USA frame number 1073, a very early one. I built it up with 100% 600 Ultegra 8 speed, all NOS out of the box. H Son Plus rims.. I don't even want to think what I have in this bike, but a good bud is worth it all day long.
The decals are custom, so don't let that throw you off. It was a tribute to him.
Last edited by UKFan4Sure; 07-13-20 at 09:12 PM.
Likes For UKFan4Sure:
#247
Lurker
Talera fat-tire build finished. Mostly. Cable routing is still a bit of a mess. And I think I want different bars. And better pedals. But I’ve been riding it a bit over the past week, including twice on the actual beach. Man, this powder-fine beach sand we have is no joke! Between the sheer muscle power needed, and the intense concentration on balance and coordination, this is quite the workout! At least for a spud like me....
The drum brakes feel just fine. No different than rim brakes, but much better protected from the sand.
And they look frankly gorgeous. Say what you want about the Chinese, but they are capable of manufacturing some fine quality goods.
This is where things get really tight with the 2.8 tires. After flatting with C-clamps and further bashing with the mini-sledge, and lots of massaging the tire to get it concentric instead of lumpy, there is still a tiny bit of rub. This may not be the right frame after all. But it’ll do for now.
The drum brakes feel just fine. No different than rim brakes, but much better protected from the sand.
And they look frankly gorgeous. Say what you want about the Chinese, but they are capable of manufacturing some fine quality goods.
This is where things get really tight with the 2.8 tires. After flatting with C-clamps and further bashing with the mini-sledge, and lots of massaging the tire to get it concentric instead of lumpy, there is still a tiny bit of rub. This may not be the right frame after all. But it’ll do for now.
__________________
1987 Nishiki Prestige (now 650B!)
1981 Trek 710
198? Nishiki Olympic 12 mixte (now 650B!)
2020 Surly Troll fat-tire build
1987 Nishiki Prestige (now 650B!)
1981 Trek 710
198? Nishiki Olympic 12 mixte (now 650B!)
2020 Surly Troll fat-tire build
#248
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,127
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3359 Post(s)
Liked 3,638 Times
in
1,244 Posts
So I've been enamored by the Force series for a while. Does anyone know what the general tire clearance on those are?
I know they were made over a few years in different materials, but has anyone fit a true 28mm tire in one?
I know they were made over a few years in different materials, but has anyone fit a true 28mm tire in one?
#249
Senior Member
Vroom fork but only 23mm
Fitted now with CF front fork
#250
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,127
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3359 Post(s)
Liked 3,638 Times
in
1,244 Posts