Noisy drivetrain the norm with oval chainrings?
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Southern California
Posts: 595
Bikes: Bianchi Oltre XR4 Celeste, De Rosa SK Pininfarina, Giant TCR SL, Giant Revolt Advanced Revolt 0 Gravel Bike, Trek Madone SLR, Cervelo R5 Disk
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 376 Post(s)
Liked 124 Times
in
65 Posts
Noisy drivetrain the norm with oval chainrings?
I just installed Absolute Black oval 48-32 chainrings on an Ultegra 8000 crankset on my gravel bike. I was told shifting would be a bit slower but not noisier. After five rides, two mechanic adjustments, the problem persists. The drivetrain is quiet when the chain is in the middle cogs but gets noisy on the edges on both rings. Is this normal or do I need a better mechanic?
#2
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
If it is a rhythmic noise in timing with the shape of the oval, chain rubbing the cage as it is pedaled then check that the front derailleur cage is parallel to the chainring and not angled.
I have AB 46/30 oval rings on Ultegra 6800 cranks. The FD was set up with the cage slightly angled relative to the ring. Noise was significantly reduced when the front derailleur was set parallel to the rings instead.
It still isn't perfect but I also run an XT 11-42 cassette with the B screw turned around so all bets are off for me.
Nice kitchen, by the way.
-Tim-
I have AB 46/30 oval rings on Ultegra 6800 cranks. The FD was set up with the cage slightly angled relative to the ring. Noise was significantly reduced when the front derailleur was set parallel to the rings instead.
It still isn't perfect but I also run an XT 11-42 cassette with the B screw turned around so all bets are off for me.
Nice kitchen, by the way.
-Tim-
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,096
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4210 Post(s)
Liked 3,878 Times
in
2,315 Posts
Where is the noise coming from is the real question. If it's chain rub on the ft der cage then one would hope that "adjustments" would reduce or eliminate the noise. If coming from the meshing of the chain onto the new rings' teeth (as I suspect is the case) then avoiding those cog/ring combos, trying various different chains (as in brand), or tolerating the noise as the teeth wear in more are the likely choices.
Of course this assumes that you're not meaning a cross chained combo as they really should be avoided if possible. Andy (whose kitchen is being updated as this is written).
Of course this assumes that you're not meaning a cross chained combo as they really should be avoided if possible. Andy (whose kitchen is being updated as this is written).
__________________
AndrewRStewart
AndrewRStewart
#4
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Bianchi bottles next to the sesame oil are a nice touch.
I need a new toaster.
-Tim-
I need a new toaster.
-Tim-
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26425 Post(s)
Liked 10,381 Times
in
7,209 Posts
...I run a couple of oval chainrings, but I don't run any of them on the largest position. Mine run quietly. You might try replacing the largest chainring with a round one and see if that solves your problem.
#6
Have bike, will travel
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284
Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times
in
158 Posts
If it is a rhythmic noise in timing with the shape of the oval, chain rubbing the cage as it is pedaled then check that the front derailleur cage is parallel to the chainring and not angled.
I have AB 46/30 oval rings on Ultegra 6800 cranks. The FD was set up with the cage slightly angled relative to the ring. Noise was significantly reduced when the front derailleur was set parallel to the rings instead.
It still isn't perfect but I also run an XT 11-42 cassette with the B screw turned around so all bets are off for me.
Nice kitchen, by the way.
-Tim-
I have AB 46/30 oval rings on Ultegra 6800 cranks. The FD was set up with the cage slightly angled relative to the ring. Noise was significantly reduced when the front derailleur was set parallel to the rings instead.
It still isn't perfect but I also run an XT 11-42 cassette with the B screw turned around so all bets are off for me.
Nice kitchen, by the way.
-Tim-
The problem is that the cage has a taper that causes some light contact with the chain as the oval ring decreases in diameter. If I adjust in extra clearance on the inside, shifting is slower. Getting it precisely adjusted is a learning curve.
Last edited by Barrettscv; 06-17-19 at 04:01 AM.