Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

What have you been wrenching on lately?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

What have you been wrenching on lately?

Old 02-16-21, 08:05 PM
  #4101  
NJgreyhead
Senior Member
 
NJgreyhead's Avatar
 
Join Date: Sep 2010
Location: South Jersey near PHL
Posts: 595

Bikes: Frequently

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 112 Post(s)
Liked 52 Times in 37 Posts
I've been working on this donated bike (late '80s Nishiki Custom) in order to Craigslist it for a non-profit. Decent 12-speed bike, worth the rehab.
Was pretty far along before finding out that the rear derailleur is FUBAR. *urk* Apparently someone thought the way to remove the chain was by bending the der all to hell. Oh well. Found a replacement on the bay, just gotta wait for it to arrive.


Last edited by NJgreyhead; 02-16-21 at 09:18 PM.
NJgreyhead is offline  
Likes For NJgreyhead:
Old 02-19-21, 01:53 PM
  #4102  
ridelikeaturtle
Senior Member
 
ridelikeaturtle's Avatar
 
Join Date: Nov 2015
Location: Dublin, Ireland
Posts: 1,123

Bikes: Bianchi Ti Megatube; Colnago Competition; Planet-X EC-130E; Klein Pulse; Amp Research B4; Litespeed Catalyst; Fondriest Squadra Corse; Trek Y11

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 319 Times in 190 Posts
Since there's nothing else to do, as it's windy as hell, raining, and there's a 5km radius lockdown still in effect... let's do another bottom bracket check!

This time it's the 1996 Bianchi Ti Megatube.

I figured it would be fine, as I did it before and greased the hell out of everything correctly. But I didn't expect it to be this perfect. How long ago was it when I did it? Time flies, it was 2014!

When I changed it before, it was pretty crusty (see the 2014 photo with the original, along with the current one), though at that point it was probably the original from '96.

Here's the bike as it is today.



When I took the bottom bracket out today, Feb 2021.



When I installed it new in Aug 2014, along with the original crusty one that I removed. If I remember correctly, it did not come out easy.
ridelikeaturtle is offline  
Likes For ridelikeaturtle:
Old 02-22-21, 08:58 PM
  #4103  
scarlson
Senior Member
 
scarlson's Avatar
 
Join Date: Jun 2010
Location: Medford MA
Posts: 1,212

Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, Renť Herse tandem

Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 525 Post(s)
Liked 644 Times in 372 Posts
This past Saturday, BF member @plonz gave me a nice Specialized Expedition to take out my frustrations on!

Two hours later, here is the result.

The cut I had to make was only 2.5" long, with the expander slot helping me out and guiding the "Alcatraz special" (hacksaw blade wrapped in electrical tape for a handle).

Poor stem, I wish I could have saved it. It was _really_ stuck. Inspired me to go around and regrease a couple seatposts and stems of my own. I realize as I get older and time speeds up, that this sort of thing could happen to me!
scarlson is offline  
Likes For scarlson:
Old 02-23-21, 01:28 AM
  #4104  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 3,740
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 1708 Post(s)
Liked 778 Times in 392 Posts
Building new wheels for my '79 Fuji America.

Origin8 LD-2100 hubs, silver Sapim Laser spokes with silver-plated Sapin brass nipples, Pacenti Brevet 700c 36H roles.







Prepping the spokes.





4-cross.



These spokes are very thin, so I drew alignment lines with a Sharpie to keep an eye on windup. I probably also should have used pliers or a cable-holding tool to hold the spokes: it would have made the adjustments at high tension easier, and probably been better for the spokes than just winging it.



Tubeless tape for tubeless rim. Cotton tape would have built the rim bed too high, and this should serve as a smoother bed for the latex tubes as well.



Genuine SunTour high-performance aerodynamic wheel cover. Definitely not a spoke protector.



Wheels fully assembled with 28mm GP5000 tires, Vittoria 25/28mm latex tubes, and a Shimano TZ20 6-speed 14-28 freewheel. A SunRace freewheel would look nicer, but both times I've tried SunRace freewheels, the bearings began to fail within a few hundred miles. So Shimano it is.

HTupolev is offline  
Likes For HTupolev:
Old 02-23-21, 05:14 AM
  #4105  
mechanicmatt
Hoards Thumbshifters
 
mechanicmatt's Avatar
 
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 993

Bikes: '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '07 Stumpjumper

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 181 Times in 112 Posts
Originally Posted by HTupolev View Post
Building new wheels for my '79 Fuji America.

Origin8 LD-2100 hubs, silver Sapim Laser spokes with silver-plated Sapin brass nipples, Pacenti Brevet 700c 36H roles.







Prepping the spokes.






.

Beautiful wheels!
Where did you end up buying your spokes and nipples? I have a few wheel projects in the future as well.
mechanicmatt is offline  
Old 02-23-21, 05:23 AM
  #4106  
mechanicmatt
Hoards Thumbshifters
 
mechanicmatt's Avatar
 
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 993

Bikes: '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '07 Stumpjumper

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 181 Times in 112 Posts
My Sunday nice weather project...



New grips and Microshift thumb shifters on my do all bike. Had to sort out derailleur alignment and shifting issues on this bike too.
mechanicmatt is offline  
Likes For mechanicmatt:
Old 02-23-21, 08:36 AM
  #4107  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 7,708

Bikes: '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '90 De Rosa Professional, '91 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 608 Times in 386 Posts
Not really bike related but I am working on rebuilding my 1/2" drive Snap On Impact wrench, IM 51. Here it is taken apart and with replacement parts kit on the right.


One of the challenges was to remove bearings and seals that were essentially blind holes. So I bought a blind hole bearing and seal remover kit.

Which I can use for the bikes with sealed bearings, like hubs, should the need arise. Also works on automotive bearings, I hope.

I have a mess of rims and wheels that I can't keep track of anymore. So a bunch of tags were ordered. They will work for a number of other projects too.
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Likes For SJX426:
Old 02-23-21, 12:45 PM
  #4108  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 3,740
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 1708 Post(s)
Liked 778 Times in 392 Posts
Originally Posted by mechanicmatt View Post
Where did you end up buying your spokes and nipples?
From Wheelbuilder.
HTupolev is offline  
Likes For HTupolev:
Old 02-24-21, 07:26 PM
  #4109  
Drillium Dude 
Gone riding
 
Drillium Dude's Avatar
 
Join Date: Jul 2009
Posts: 10,682
Mentioned: 208 Post(s)
Tagged: 0 Thread(s)
Quoted: 1722 Post(s)
Liked 1,401 Times in 625 Posts
Finally decided to get my thumb out and begin the final cleaning/polishing of a number of stems I've had sitting around awaiting refurbishment. Cleaned and polished up one of my Cinelli 1Rs to mate with a cleaned-up Campione del Mondo bar. I ended up with a lovely set to drop in as a replacement for the combo that was on the Medici; the stem in particular needed attention as it was missing some anodizing along the top and right side. Once I dropped the new one - already pre-taped and with a pair of brake clamps in place - I cabled up the brakes and am ready to go. Well, I was until I realized the polish job was too good and now the seatpost looked dull! I pulled it this afternoon and after an hour with bronze wool and varying sanding films I came up with a closely-matching finish I'm happy with.

Here's the ugly one; I'll be getting to this one day, but not soon because I'm out of anodizing stripper for the time being:



The new shiny bits:



DD
__________________
My Flickr pics: https://www.flickr.com/photos/30331021@N08/

Drillium Dude is offline  
Old 02-24-21, 10:06 PM
  #4110  
1 Lugnut
Senior Member
 
1 Lugnut's Avatar
 
Join Date: May 2005
Location: S.F. Bay Area
Posts: 541

Bikes: Motobecane Grand Record, Colnago Super, Mondia Super, Mondia Special, Mondia Prestige (for sale 55cm),Titan Star, Titan Exklusiv, Windsor

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 82 Times in 43 Posts
Originally Posted by Drillium Dude View Post

Here's the ugly one; I'll be getting to this one day, but not soon because I'm out of anodizing stripper for the time being:


DD
Really like the 1/R Stems! Have one on my Ď74 Moto GR. Had to replace the wedge once. But Iím esp fond of of the older logo (crest) on your bars. Have them on the Moto as well, Ďcept the bars are a bit too narrow. Wish they were 42 cm! Hard to find a decent replacement 66/42 w/ that cool looking crest,

Nice job on the polishing Jeff. I do that too, but use Drano crystals or my wifeís lye. Goes pretty quik...
Getting the nicks out is the hard part...
1 Lugnut is offline  
Old 02-26-21, 04:53 PM
  #4111  
Phil_gretz
Journeyman Bike Commuter
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Alexandria, VA
Posts: 6,408

Bikes: '71 Jeunet 640, '79 Peugeot PXN10LE, '88 Fuji Saratoga, '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '16 Motobecane Gran Premio Elite, '18 Velobuild VB-R-022

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1206 Post(s)
Liked 1,013 Times in 550 Posts
Here's a tease...

You can pick up certain details from these clues. Other clues: frame is Asian and aluminum, black on silver theme...


EDIT: Oh. Neither vintage nor classic, unfortunately.
Phil_gretz is offline  
Old 02-27-21, 02:36 PM
  #4112  
Chuck M 
Well Oiled
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 182

Bikes: 1980 Takara 970 Grand Touring, 1981 Takara 950 Deluxe 12, 2018 Trek Domane ALR 5, 2007 Marin Coast Trail, 1983 Bridgestone Carmel mixte

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Liked 100 Times in 56 Posts
I picked up a mixte for my wife last week. She doesn't appreciate the 39 year old brown paint job as much as me. If it is the difference between her liking the bike enough to ride with me once in a while or not, I guess I will look into spray.bike and give it a go.




__________________
Chuck M is offline  
Likes For Chuck M:
Old 02-27-21, 02:43 PM
  #4113  
daverup 
Senior Member
 
daverup's Avatar
 
Join Date: Jun 2019
Location: Michigan USA
Posts: 221

Bikes: 86 Centurion Ironman, 78 Schwinn Super LeTour 12.2, 83 Schwinn Le Tour, 76 Austro Daimler, 87 Puch Mistral, 89 Diamondback Axis XT, 94 Schwinn Crosscut, 2016 Rocky Mountain Blizzard, 1994 Rans Tailwind, Couple of early 80's Mixte's

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 101 Times in 63 Posts
Chocolate Carmel Bridgestone! I'll bet it will shine up nicely
daverup is offline  
Likes For daverup:
Old 02-27-21, 03:35 PM
  #4114  
xiaoman1 
Awaiting Parole
 
xiaoman1's Avatar
 
Join Date: Mar 2014
Location: Weird Coast City of the Angels
Posts: 3,955

Bikes: A few too many

Mentioned: 37 Post(s)
Tagged: 1 Thread(s)
Quoted: 908 Post(s)
Liked 765 Times in 514 Posts
Originally Posted by Drillium Dude View Post
Finally decided to get my thumb out and begin the final cleaning/polishing of a number of stems I've had sitting around awaiting refurbishment. Cleaned and polished up one of my Cinelli 1Rs to mate with a cleaned-up Campione del Mondo bar. I ended up with a lovely set to drop in as a replacement for the combo that was on the Medici; the stem in particular needed attention as it was missing some anodizing along the top and right side. Once I dropped the new one - already pre-taped and with a pair of brake clamps in place - I cabled up the brakes and am ready to go. Well, I was until I realized the polish job was too good and now the seatpost looked dull! I pulled it this afternoon and after an hour with bronze wool and varying sanding films I came up with a closely-matching finish I'm happy with.

Here's the ugly one; I'll be getting to this one day, but not soon because I'm out of anodizing stripper for the time being:



The new shiny bits:



DD
Jeff, Same here....I worked a bit on this post for my current build....there's something satisfying about bringing back a little lustre to a worn finish.
I hope you're not having NAGO withdrawal, it was a beaut.


Best, Ben
__________________
"STAND UP FOR WHAT IS RIGHT EVEN IF YOU ARE THE ONLY ONE STANDING"

xiaoman1 is offline  
Likes For xiaoman1:
Old 02-27-21, 08:47 PM
  #4115  
Fahrenheit531 
In a Land Without Winter
 
Fahrenheit531's Avatar
 
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 3,812

Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 664 Post(s)
Liked 366 Times in 199 Posts
Switching some things up on the single-speed Raleigh:



Cleaning up the look after running MAFAC Racers for the last however long. Should've done it sooner.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Fahrenheit531 is offline  
Likes For Fahrenheit531:
Old 02-27-21, 08:59 PM
  #4116  
Chuck M 
Well Oiled
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 182

Bikes: 1980 Takara 970 Grand Touring, 1981 Takara 950 Deluxe 12, 2018 Trek Domane ALR 5, 2007 Marin Coast Trail, 1983 Bridgestone Carmel mixte

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Liked 100 Times in 56 Posts
Originally Posted by daverup View Post
Chocolate Carmel Bridgestone! I'll bet it will shine up nicely
Discussing it over gumbo and craft beers tonight, she agrees the original paint needs to stay. If she rides it and doesn't like the color, I'll look for another survivor in a color she likes.
__________________
Chuck M is offline  
Old 02-27-21, 09:28 PM
  #4117  
daverup 
Senior Member
 
daverup's Avatar
 
Join Date: Jun 2019
Location: Michigan USA
Posts: 221

Bikes: 86 Centurion Ironman, 78 Schwinn Super LeTour 12.2, 83 Schwinn Le Tour, 76 Austro Daimler, 87 Puch Mistral, 89 Diamondback Axis XT, 94 Schwinn Crosscut, 2016 Rocky Mountain Blizzard, 1994 Rans Tailwind, Couple of early 80's Mixte's

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 101 Times in 63 Posts
Originally Posted by Chuck M View Post
Discussing it over gumbo and craft beers tonight, she agrees the original paint needs to stay. If she rides it and doesn't like the color, I'll look for another survivor in a color she likes.
Nice! I think it was a great pick however it works out. I fixed up a 80's Centurion Mixte for my wife and she really likes it.
daverup is offline  
Likes For daverup:
Old 02-27-21, 09:45 PM
  #4118  
bwilli88 
Senior Member
 
bwilli88's Avatar
 
Join Date: Jan 2013
Location: Kampong Cham, Cambodia but I have quite a few in Lancaster, PA
Posts: 2,588

Bikes: Bikes in USA; 73 Raleigh Supercourse dingle speed, 74 Raleigh Grand Prix SS, 78 Raleigh Supercourse, 83 Centurion Pro-Tour, 82 Raleigh RRA.

Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 346 Times in 220 Posts
Two Japanese recycle hybrids that I am fixing up for some neighbors.
bwilli88 is offline  
Old 02-28-21, 07:08 AM
  #4119  
DorkDisk
Senior Member
 
Join Date: May 2013
Location: Kips Bay, NY
Posts: 1,764

Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Hiawatha 3sp | Shogun Kaze | Breezer Lightning

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 399 Post(s)
Liked 501 Times in 270 Posts
Originally Posted by HTupolev View Post
Building new wheels for my '79 Fuji America.

Origin8 LD-2100 hubs, silver Sapim Laser spokes with silver-plated Sapin brass nipples, Pacenti Brevet 700c 36H roles.







Prepping the spokes.





4-cross.



These spokes are very thin, so I drew alignment lines with a Sharpie to keep an eye on windup. I probably also should have used pliers or a cable-holding tool to hold the spokes: it would have made the adjustments at high tension easier, and probably been better for the spokes than just winging it.



Tubeless tape for tubeless rim. Cotton tape would have built the rim bed too high, and this should serve as a smoother bed for the latex tubes as well.



Genuine SunTour high-performance aerodynamic wheel cover. Definitely not a spoke protector.



Wheels fully assembled with 28mm GP5000 tires, Vittoria 25/28mm latex tubes, and a Shimano TZ20 6-speed 14-28 freewheel. A SunRace freewheel would look nicer, but both times I've tried SunRace freewheels, the bearings began to fail within a few hundred miles. So Shimano it is.

This is the kind of pics and write up I can never seem to do. Thanks.
DorkDisk is offline  
Old 03-01-21, 06:03 AM
  #4120  
bartra228
Junior Member
 
bartra228's Avatar
 
Join Date: Apr 2019
Location: iowa city
Posts: 14

Bikes: s&m

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Recently I had problems with the gearbox, both on the bike and on the car, I was not very good at it, but the information from this site https://at-manuals.com/helped me a lot. I was able to solve this problem that bothered me for a long time and now I am completely confident that I will not allow such breakdowns.

Last edited by bartra228; 03-04-21 at 06:53 AM.
bartra228 is offline  
Old 03-04-21, 09:50 AM
  #4121  
capnjonny 
Senior Member
 
capnjonny's Avatar
 
Join Date: Nov 2014
Location: Saratoga calif.
Posts: 713

Bikes: Miyata 610(66cm), GT Vantara Hybrid (64cm), Nishiki International (64cm), Peugeot rat rod (62 cm), Trek 800 Burning Man helicopter bike, Bob Jackson frame (to be restored?) plus a never ending stream of neglected waifs from the Bike exchange.

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 229 Post(s)
Likes: 0
Liked 97 Times in 59 Posts
I just finished this SR Semi pro. The bike came into the Bike exchange looking pretty tired. I decided to give it a repaint but didn't want to strip off all the old paint so I sanded and treated the rusty bits then sanded down the existing paint, primed with Rustoleum primer then again with Rustoleum primer filler for the pits and scratcher , sanded, then top coated with Rustoleum Hammered copper. Everything went well until I sprayed a coat of Rustoleum Automotive clear as a final coat. The solvents in the clear attacked the still soft undercoat and alligatored the paint around the lugs. Major PITA. I called the Rustoleum tech dept. and they told me that the clear has a mostly acetone solvent that, if the paint underneath isn't completely cured, will attack it and cause the alligatoring. I have used this clear successfully on a number of bikes over weathered original paint with great results but have had problems with a couple other repaints and have decided it is not worth the risk on new work. If you do want to clear coat new paint please let the paint cure for at least a couple weeks, preferably in the sunlight or a very warm place before spraying the clear.

After painting the bike I wanted to put a chain stay protector. I had a small piece of soft copper flashing I picked up on a construction site and cut it into shape them using 3m 90 spray adhesive. glued it to the stay and gave it a hammered finish.

Next up is a Windsor Carrera Sport coming soon. I understand the SR and the Carrera were both made by the same Mexican company.
capnjonny is online now  
Likes For capnjonny:
Old 03-04-21, 11:16 AM
  #4122  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 1,587
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 482 Post(s)
Liked 347 Times in 249 Posts
A loose Trek 560 frame in my possession

now has all the bits, minus nds crank arm. Built Back Better with Suntour hubs on Mavic GL 40 rims, Aero Royal Gran Compe brakes, Shimano Light Action with LX Sport shifters, Avocet touring saddle.

The Black Widow
Mr. 66 is offline  
Old 03-05-21, 01:58 PM
  #4123  
NJgreyhead
Senior Member
 
NJgreyhead's Avatar
 
Join Date: Sep 2010
Location: South Jersey near PHL
Posts: 595

Bikes: Frequently

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 112 Post(s)
Liked 52 Times in 37 Posts
Above on 2.16.21, I posted a fuzzy flip-phone pic of a Nishiki I was re-habbing in my basement for a non-profit.
Here it is, done and in the sun.


Last edited by NJgreyhead; 03-06-21 at 04:44 PM.
NJgreyhead is offline  
Likes For NJgreyhead:
Old 03-06-21, 05:50 AM
  #4124  
skier
Member
 
Join Date: Mar 2016
Location: CT
Posts: 35

Bikes: Performer X-Low, Catrike Trail, Windcheetah Club Sport

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 29 Times in 12 Posts
Iím not sure if this qualifies as vintage. But itís a build of the latest evolution of the Alleweder Velomobile (originally marketed in 1992). This is the FAW+ and the kit was delivered to me in 2018. It could be argued the original Alleweder is kind of the great grandfather to all the latest composite machines Quest, WAW, Alpha 7, Quattrovelo, etc.

Iím hoping to have it on the road this spring.


Last edited by skier; 03-06-21 at 05:56 AM.
skier is offline  
Old 03-06-21, 06:34 AM
  #4125  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 7,708

Bikes: '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '90 De Rosa Professional, '91 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 608 Times in 386 Posts
After about 2 1/2 months the Miche Super Type showed up.
Installed it . Details in this thread, Help me build a 1990 De Rosa Pro - Page 5 - Bike Forums
P1040763 on Flickr
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.