A Spritely Sprite (Raleigh Conversion)
#1
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
A Spritely Sprite (Raleigh Conversion)
I know, I know - but hey, I didn't hack anything off the frame or otherwise mangle it. The original parts are still with me, neatly tucked away in a bag.
I believe this is a '72 model (please correct me if this is not right). I simply took the wheelset and drivetrain from my too-tall (62cm) Bstone Kabuki conversion and threw in some new cables and my Brooks and voilą! Only a handful of neighborhood cruises so far, but I'm diggin' how it rides.
I believe this is a '72 model (please correct me if this is not right). I simply took the wheelset and drivetrain from my too-tall (62cm) Bstone Kabuki conversion and threw in some new cables and my Brooks and voilą! Only a handful of neighborhood cruises so far, but I'm diggin' how it rides.
Last edited by lorenzo_de_leon; 07-28-19 at 03:35 PM.
#2
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
That's looking sharp. Have you considered modernizing the brakes with some Tektro dual-pivots? Would be just the ticket to modernize the brake system to go along with the updated drivetrain.
Incidentally, I always detested the Huret RD & Maillard freewheel combo on these, so anything that substitutes or does away with both is an improvement in my book.
-Kurt
Incidentally, I always detested the Huret RD & Maillard freewheel combo on these, so anything that substitutes or does away with both is an improvement in my book.
-Kurt
#3
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Would the Tektros be the best bet for fit and affordability?
Thanks,
Lorenzo
#4
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
The R559's are much nicer finished than the latter two, but the 800A and 900A's sometimes blend in so well with old entry-level C&V bits that it's positively eerie.
-Kurt
Last edited by cudak888; 07-28-19 at 07:24 PM.
#5
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Thanks again for the helpful suggestions.
#6
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
-Kurt
#7
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Can I suggest some new Dia Compe 750 centerpulls instead? Plenty of reach, more tire clearance than the Tektros, and they brake really well. They also are a lot prettier than the Tektros and the fact that they have been made for decades gives them C&V gravitas.
As seen on my '73 Sports Tourer:
As seen on my '73 Sports Tourer:
#8
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Edit: I see now that the prices are a bit all over the place - looks like some could be had for close to the same price as the Tektros...
Last edited by lorenzo_de_leon; 07-28-19 at 09:02 PM.
#9
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
Sure! I like those as well - price may be a factor though as I only have about $40 invested in this build so far. Those 750s would each be worth more than the bike!
Edit: I see now that the prices are a bit all over the place - looks like some could be had for close to the same price as the Tektros...
Edit: I see now that the prices are a bit all over the place - looks like some could be had for close to the same price as the Tektros...
-Kurt
#10
Senior Member
With Kurt's caveat about fit, I'd vote for QR cable hangers if you decide to go the center pull route. Maintenance and flat changes are much easier and more convenient.
Likes For chainwhip:
#11
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
No brake upgrade yet but despite my initial "bare bones" approach, I decided to slap the original fenders back on and throw my Wald basket on as well - I'm diggin' it as an errand-running city bike.
Likes For lorenzo_de_leon:
#13
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
#14
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
I did up a later 70s Sprite as one of my first projects- those brakes and levers are shockingly heavier than aluminum DiaCompe brakes. This is my post from 9 years ago:
Speaking of weight-
Comparing the weight of the Raleigh brakes with the DiaCompe "Schwinn Approved" brakes... seriously, the aluminum DiaCompes are about half the weight. I was out in the garage messing with it tonite- got the grips and brake levers off the Suburban- that was a chore. I'm realizing that the Weinmann levers are substantially lighter than the Raleigh levers. As I'm looking at things and getting ready to remove the shifters from the World Sport- I thought of just using the WS stem... I can only imagine the weight difference there... Just in what I'm looking at- it's a pound or so difference, not including the stem and shifters or derailleurs.
Unfortunately, all the pix are gone.
Speaking of weight-
Comparing the weight of the Raleigh brakes with the DiaCompe "Schwinn Approved" brakes... seriously, the aluminum DiaCompes are about half the weight. I was out in the garage messing with it tonite- got the grips and brake levers off the Suburban- that was a chore. I'm realizing that the Weinmann levers are substantially lighter than the Raleigh levers. As I'm looking at things and getting ready to remove the shifters from the World Sport- I thought of just using the WS stem... I can only imagine the weight difference there... Just in what I'm looking at- it's a pound or so difference, not including the stem and shifters or derailleurs.
Unfortunately, all the pix are gone.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#15
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Oh yeah, they're built like old-timey military gear. I wanted to use this bike for a bit to see if it's a keeper. Now that I think it is I'll start looking into upgrades, i.e. alloy rims and new brakes / levers...
#16
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,396 Times
in
2,093 Posts
-Kurt
#17
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
Those old steel brakes really aren't bad, at least if you have strong hands, as some normal size men do. You just need good pads like Kool Stop.
Nice bike, and I like what you did with it.
Nice bike, and I like what you did with it.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
When man invented the bicycle he reached the peak of his attainments. Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
When man invented the bicycle he reached the peak of his attainments. Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#18
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Likes For lorenzo_de_leon:
#19
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Greensboro, NC
Posts: 58
Bikes: '76 B-Stone Kabuki (SS) / '90 B-Stone MB-6 (1x5) / '94 B-Stone MB-6 (with bobike seat for the boy) / '96 Kona Hahanna / Salsa Journeyman (Claris 650b...for gravel or something...)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 15 Times
in
12 Posts
Haha! Yeah, I heard somewhere that Chuck Norris only rides with steel levers... I mean, they're functional for sure, not the most comfortable though.
Likes For lorenzo_de_leon:
#20
Senior Member