Salsa Marrakesh or Surly LHT?
#26
Senior Member
Join Date: Jul 2017
Posts: 919
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Glad you like the LHT
But I think the LHT is just overkill. Not just the ones you mentioned: the down shifters, pump peg etc, but the ENTIRE bike is overkill. Its designed like a tank and most days how often do we actually need to haul 40 pounds?
Give me my 25 pound Fuji touring anyway day of the week!
Give me my 25 pound Fuji touring anyway day of the week!
#27
2-Wheeled Fool
Join Date: Sep 2016
Location: New Hampshire
Posts: 2,346
Bikes: Surly Ogre, Brompton
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1385 Post(s)
Liked 677 Times
in
457 Posts
And the most obtrusive is the dropouts. The tubes (fork and rear) leading to the dropouts do not taper at all, instead they cut out the tube and place a reinforcement at the end of the tube .
With racks and fenders, the quick release lever on the wheel has practically no space. I have found 1 position , but even that one is not perfect.
Anyone have a solution for this?
With racks and fenders, the quick release lever on the wheel has practically no space. I have found 1 position , but even that one is not perfect.
Anyone have a solution for this?
https://halo-usa.com/products/hl9015...xoCK_EQAvD_BwE
#28
Banned.
Join Date: Jan 2014
Location: Vegemite Island
Posts: 4,130
Bikes: 2017 Surly Troll with XT Drive Train, 2017 Merida Big Nine XT Edition, 2016 Giant Toughroad SLR 2, 1995 Trek 830
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1916 Post(s)
Liked 310 Times
in
218 Posts
But I think the LHT is just overkill. Not just the ones you mentioned: the down shifters, pump peg etc, but the ENTIRE bike is overkill. Its designed like a tank and most days how often do we actually need to haul 40 pounds?
Give me my 25 pound Fuji touring anyway day of the week!
Give me my 25 pound Fuji touring anyway day of the week!
#29
Senior Member
Thread Starter
#30
-
https://deltacycle.com/Wheel-Security
https://pinheadlocks.com/store/en/wh...l#/spare_key-_
WRT LHT's pump peg, you can still buy frame pumps, Zefal HPX and Silca for example. I have a 28-year-old Zefal pump in good condition which fits my Disk Trucker frame, but I no longer use it. Frame pumps have fallen in popularity even in the touring bike niche in favor of smaller, lighter pumps, some of which can be foot-anchored to the ground for better stability and less likelihood of tube stem damage. Here is an excellent review of the two most commonly used and recommended pumps on this subforum:
https://www.bikeforums.net/touring/1...html?styleid=8
Last edited by seeker333; 12-21-18 at 02:21 PM.
#31
Senior Member
I have a current model Topeak frame pump and love it. I’ve had it for probably five years now with zero issues and have used it quite a bit. I believe I did unscrew the end and apply some grease to the o-ring once, taking all of one minute worth of work. I think it’s nicer to air up a tire with than one of the really small pumps.
#32
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6201 Post(s)
Liked 4,204 Times
in
2,358 Posts
Any suggestions?
Finished assembly, I like a lot of things about the LHT frame, but a couple of things that I do not like.
First is the down tube lever mounts. Considering that 10% of riders might still use these shift levers, 90% do not. If Surly does not want to change the design, at least include some cable stoppers with the frame.
The often mentioned air pump nipple that could hold one if, you happen to have a pump from the 70s
And the most obtrusive is the dropouts. The tubes (fork and rear) leading to the dropouts do not taper at all, instead they cut out the tube and place a reinforcement at the end of the tube .
With racks and fenders, the quick release lever on the wheel has practically no space. I have found 1 position , but even that one is not perfect.
Anyone have a solution for this?
Oh, and one more thing: The foam wrapping they use to package the individual tubing actually scratches the surface of the finish
Cheers
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#33
Senior Member
Join Date: Mar 2011
Posts: 3,090
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1034 Post(s)
Liked 1,289 Times
in
743 Posts
Any suggestions?
Finished assembly, I like a lot of things about the LHT frame, but a couple of things that I do not like.
First is the down tube lever mounts. Considering that 10% of riders might still use these shift levers, 90% do not. If Surly does not want to change the design, at least include some cable stoppers with the frame.
The often mentioned air pump nipple that could hold one if, you happen to have a pump from the 70s
And the most obtrusive is the dropouts. The tubes (fork and rear) leading to the dropouts do not taper at all, instead they cut out the tube and place a reinforcement at the end of the tube .
With racks and fenders, the quick release lever on the wheel has practically no space. I have found 1 position , but even that one is not perfect.
Anyone have a solution for this?
Oh, and one more thing: The foam wrapping they use to package the individual tubing actually scratches the surface of the finish
Cheers
#34
Banned
Any suggestions?
Finished assembly, I like a lot of things about the LHT frame, but a couple of things that I do not like.
First is the down tube lever mounts. Considering that 10% of riders might still use these shift levers, 90% do not. If Surly does not want to change the design, at least include some cable stoppers with the frame.
The often mentioned air pump nipple that could hold one if, you happen to have a pump from the 70s
And the most obtrusive is the dropouts. The tubes (fork and rear) leading to the dropouts do not taper at all, instead they cut out the tube and place a reinforcement at the end of the tube .
With racks and fenders, the quick release lever on the wheel has practically no space. I have found 1 position , but even that one is not perfect.
Anyone have a solution for this?
Oh, and one more thing: The foam wrapping they use to package the individual tubing actually scratches the surface of the finish
Cheers
front of fork tip eyelet not used ..
....
Last edited by fietsbob; 12-22-18 at 11:55 AM.
#35
-
Likes For seeker333:
#36
Banned
I am a summer Shop mechanic, at the western end of a lot of bike tours and see many people's winging the rack installations..
& Many bikes don't have double eyelet fork dropouts,, so rather logical to not design a product for too small a market segment ...
....
& Many bikes don't have double eyelet fork dropouts,, so rather logical to not design a product for too small a market segment ...
....
#37
Senior Member
Thread Starter
#38
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 3,658 Times
in
1,677 Posts
Just want to second the hex skewers. They weigh less and slow down a thief for a couple of seconds. Plus i love pump pegs. A full size zefal frame pump makes me happy. I also dig barcons so the shifter mounts on the downtube make sense to me.
Having said all that, i ride a bob jackson world tourist, but i think the lht is a hell of a frameset.
Having said all that, i ride a bob jackson world tourist, but i think the lht is a hell of a frameset.
#39
Senior Member
Thread Starter
I may have to find another solution.
Thinking about attaching the fender supports to the inside of the dropouts. Will need to find a flat head screw for that. Or just change fenders to the light weight style that only uses the upper bolt for installation (quick install).
Good thing it is winter and have time to work this out.
#40
-
Great! It solved the lever problem, but created another lesser problem. Moving the rack to the rear bolt, the front support that joins the 2 sides now how has about 1cm (1/2") clearance from the tire. Which is fine for a 38c tire, but worrying if I go up in size. I may have to find another solution. Thinking about attaching the fender supports to the inside of the dropouts. Will need to find a flat head screw for that. Or just change fenders to the light weight style that only uses the upper bolt for installation (quick install). Good thing it is winter and have time to work this out.
Nearly every fender (and rack) installation is a "custom" job requiring trial and error fitting, some bending, an assortment of unusual fasteners and spacers and resourcefulness on the part of the installer. In other words, it's almost always a surprising PITA to do, so take your time and get it right. Use blue Loctite or similar threadlocker to keep fasteners from loosening and falling out down the road - and carry spare fender & rack fasteners just in case the Loctite fails.
#41
Senior Member
Join Date: Jul 2008
Location: Hsinchu County Taiwan ROC
Posts: 106
Bikes: 2007 Bianchi Volpe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Liked 0 Times
in
0 Posts
#42
Senior Member
Thread Starter
Cube, Diamont and Radon make numerous models, but I would not consider them "full tourers"
Fahrradmanufaktur
Cinelli has the Hobootleg
Bombtrack
Koga
I considered them all, but I guess I wanted to build a bike from the frame and the LHT was always the bike that said "Tour the world"
#43
Senior Member
I'd never heard of Fahrradmanufaktur. I kind of want one of these just so I can have Fahrradmanufaktur painted on the downtube. What a name...
Likes For 3speed:
#44
2-Wheeled Fool
Join Date: Sep 2016
Location: New Hampshire
Posts: 2,346
Bikes: Surly Ogre, Brompton
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1385 Post(s)
Liked 677 Times
in
457 Posts
I did a fair bit of research into European brands and There are several, but few are dedicated full time tourers.
Cube, Diamont and Radon make numerous models, but I would not consider them "full tourers"
Fahrradmanufaktur
Cinelli has the Hobootleg
Bombtrack
Koga
I considered them all, but I guess I wanted to build a bike from the frame and the LHT was always the bike that said "Tour the world"
Cube, Diamont and Radon make numerous models, but I would not consider them "full tourers"
Fahrradmanufaktur
Cinelli has the Hobootleg
Bombtrack
Koga
I considered them all, but I guess I wanted to build a bike from the frame and the LHT was always the bike that said "Tour the world"
#45
Senior Member
Join Date: Apr 2014
Location: Maine, USA
Posts: 1,612
Bikes: Corvid Sojourner, Surly Ice Cream Truck, Co-Motion Divide, Co-Motion Java Tandem, Salsa Warbird, Salsa Beargrease, Carver Tandem
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 533 Post(s)
Liked 435 Times
in
227 Posts
If we are going to throw euro tourers around then ... Santos :-)
#46
Senior Member
Thread Starter
#47
Senior Member
Thread Starter
Likes For ppoollppoo:
#49
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
We sell both in our shop and in almost every case of selling one against the other we erecommend the Marakesh as it is a bit livelier and more fun to ride when you are not touring. The LHT has a reputation as bombproof, but really so is the Marakesh and it is a bit more modern and more fun to ride. Both can be taken around the world multiple times without problems (not just the LHT as everyone thinks!)