Oring/O-ring Boring. What governs stretch?
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: TX
Posts: 518
Bikes: Downtube IX NS&FS, Dahon Speed8Pro/Matrix/Curve, Brom S2L,Montague Para, ICE-XL w/Rollie/Schlumpf, Trident Spike, ebikes, BFSatRDay
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 94 Times
in
80 Posts
Oring/O-ring Boring. What governs stretch?
I have several sensors mounting with Orings and they break over time. When going to a Hardware store I am seeing a lot of variability in oring elasticity/stretch, which is a big deal in sensor mounting.
Does anyone have a resource for targeting stretchy orings , rather than the thicker Buna rubber ones more directed towards sealing?
I really need robust rubber bands, not seals. more a bike mount band kit
Either a discussion of this or a source . Onesies and twosies are more expensive and hard to reproduce results.
Most of mine came with sensors from China and OEM is not a good source.
Sources state:
"To provide an effective seal, the O-ring's inside diameter (I.D.) must be smaller than the piston groove diameter, so that the O-ring is slightly stretched, fitting snugly in the groove.
This stretch should be between 1%-5% with 2% as the ideal in most applications. A stretch greater than 5% is not recommended."
"With the O-ring calculator, engineers can specify the groove dimensions for a specific O-ring or a specific groove.
The O-ring calculator calculates the most relevant size O-ring for any given groove and includes O-ring inner diameter stretch and the desired Polymer Group or Seal Hardness. ."
Examples: Garmin Bike mount band kit (replacement) 6 for $15.77,CatEye CA5447010 Rapid X Spare Bands- 2 for 8.95,Ascher Bike Silicone Mount Band, Cycling Bicycle Rubber Straps, Pack of 4 $6.99
All seeming less than ideal
Does anyone have a resource for targeting stretchy orings , rather than the thicker Buna rubber ones more directed towards sealing?
I really need robust rubber bands, not seals. more a bike mount band kit
Either a discussion of this or a source . Onesies and twosies are more expensive and hard to reproduce results.
Most of mine came with sensors from China and OEM is not a good source.
Sources state:
"To provide an effective seal, the O-ring's inside diameter (I.D.) must be smaller than the piston groove diameter, so that the O-ring is slightly stretched, fitting snugly in the groove.
This stretch should be between 1%-5% with 2% as the ideal in most applications. A stretch greater than 5% is not recommended."
"With the O-ring calculator, engineers can specify the groove dimensions for a specific O-ring or a specific groove.
The O-ring calculator calculates the most relevant size O-ring for any given groove and includes O-ring inner diameter stretch and the desired Polymer Group or Seal Hardness. ."
Examples: Garmin Bike mount band kit (replacement) 6 for $15.77,CatEye CA5447010 Rapid X Spare Bands- 2 for 8.95,Ascher Bike Silicone Mount Band, Cycling Bicycle Rubber Straps, Pack of 4 $6.99
All seeming less than ideal
Last edited by bikebikebike; 06-26-20 at 03:25 PM.
#2
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,112
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3426 Post(s)
Liked 1,441 Times
in
1,122 Posts
Do you have any inner tubes that you had a blow out that you can't patch? If you do, there is your rubber source.
If you do not have any tubes that you want to use a scissors on, next time you are in a bike shop, ask a mechanic if you can have a blown out tube out of their garbage bin. If they look at you with an odd look, just tell them size does not matter, you want to use it to make some rubber bands, and tell them the thicker the better.
Most of my sensors are attached with zip ties, not with a stretchy band.
If you do not have any tubes that you want to use a scissors on, next time you are in a bike shop, ask a mechanic if you can have a blown out tube out of their garbage bin. If they look at you with an odd look, just tell them size does not matter, you want to use it to make some rubber bands, and tell them the thicker the better.
Most of my sensors are attached with zip ties, not with a stretchy band.
#4
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
Are you confusing the specs for o-rings used to seal things from fluid and/or gas leakage with specs for using as rubber bands? Even so, there are many different specs for O-rings that operate in different environments. IE, space shuttle booster vs air chuck on floor pump.
Didn't see anything about UV resistance in your specs. Maybe that's an issue for those companies using O-rings that were only intended to seal.
As suggested, cut up an old inner tube o use nylon wire ties (tie wraps).
Didn't see anything about UV resistance in your specs. Maybe that's an issue for those companies using O-rings that were only intended to seal.
As suggested, cut up an old inner tube o use nylon wire ties (tie wraps).
#6
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,623
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 549 Post(s)
Liked 721 Times
in
365 Posts
You guys aren't using ceramic o-rings?
Seriously, I haven't had issues with any garmin or cateye bands.
Seriously, I haven't had issues with any garmin or cateye bands.
#7
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
Just the OP apparently is having issues. I still have my garmin quarter turn mount for my edge 500 using the same two o-rings I put on it 10 years ago. And Garmin gave me a a lot of extras too that I still am waiting to use. Most sensors and crank magnets I have nylon wire ties holding them on.
#8
Senior Member
Just the OP apparently is having issues. I still have my garmin quarter turn mount for my edge 500 using the same two o-rings I put on it 10 years ago. And Garmin gave me a a lot of extras too that I still am waiting to use. Most sensors and crank magnets I have nylon wire ties holding them on.
+1. I bought spares probably 10 years ago when Garmin came out with the quarter mount and have never broken one
#9
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,847
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2578 Post(s)
Liked 1,901 Times
in
1,193 Posts
The O-rings I've got from Garmin and Cateye do look an awful lot like the polynitrile (?) O-rings I buy at my Local Hardware Store (LHS) to fix plumbing problems. (Great, now we can debate LHS vs. Home Depot web orders...)
My biggest worry is that when one of the Garmin O-rings break, I'll have forgotten where I put the extras.
My biggest worry is that when one of the Garmin O-rings break, I'll have forgotten where I put the extras.
Likes For pdlamb:
#10
Senior Member
Thread Starter
Join Date: Jul 2006
Location: TX
Posts: 518
Bikes: Downtube IX NS&FS, Dahon Speed8Pro/Matrix/Curve, Brom S2L,Montague Para, ICE-XL w/Rollie/Schlumpf, Trident Spike, ebikes, BFSatRDay
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 94 Times
in
80 Posts
Thanks for the help.
My most vulnerable Orings are ones that get nicked when being swapped between rides, or are holding pedal cadence sensors in place where a shoe can bump them.
I imagine stable settings that don't get moved are not an issue and pretty durable.
The ones I get from bike vendors at $4 (!) ea are ~2mm and
the HDW store ones closer to 3mm butyl and pretty stiff.
I swap them out at the first hint of a nick.
I have plenty of skinny tires so will try the inner tube route.
I put a tape wrap on almost everything to protect them, if they are exposed to blows, as a $200 Varia light is not something I want to trust to any oring.
and that is inelegant. I may switch to safety wires as carrying tools to cut cable ties also gets elaborate
My most vulnerable Orings are ones that get nicked when being swapped between rides, or are holding pedal cadence sensors in place where a shoe can bump them.
I imagine stable settings that don't get moved are not an issue and pretty durable.
The ones I get from bike vendors at $4 (!) ea are ~2mm and
the HDW store ones closer to 3mm butyl and pretty stiff.
I swap them out at the first hint of a nick.
I have plenty of skinny tires so will try the inner tube route.
I put a tape wrap on almost everything to protect them, if they are exposed to blows, as a $200 Varia light is not something I want to trust to any oring.
and that is inelegant. I may switch to safety wires as carrying tools to cut cable ties also gets elaborate
Last edited by bikebikebike; 06-06-21 at 05:18 PM.
#11
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,241
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4222 Post(s)
Liked 1,322 Times
in
916 Posts
I have several sensors mounting with Orings and they break over time. When going to a Hardware store I am seeing a lot of variability in oring elasticity/stretch, which is a big deal in sensor mounting.
Does anyone have a resource for targeting stretchy orings , rather than the thicker Buna rubber ones more directed towards sealing?
I really need robust rubber bands, not seals. more a bike mount band kit
Either a discussion of this or a source . Onesies and twosies are more expensive and hard to reproduce results.
Most of mine came with sensors from China and OEM is not a good source.
Sources state:
"To provide an effective seal, the O-ring's inside diameter (I.D.) must be smaller than the piston groove diameter, so that the O-ring is slightly stretched, fitting snugly in the groove.
This stretch should be between 1%-5% with 2% as the ideal in most applications. A stretch greater than 5% is not recommended."
"With the O-ring calculator, engineers can specify the groove dimensions for a specific O-ring or a specific groove.
The O-ring calculator calculates the most relevant size O-ring for any given groove and includes O-ring inner diameter stretch and the desired Polymer Group or Seal Hardness. ."
Examples: Garmin Bike mount band kit (replacement) 6 for $15.77,CatEye CA5447010 Rapid X Spare Bands- 2 for 8.95,Ascher Bike Silicone Mount Band, Cycling Bicycle Rubber Straps, Pack of 4 $6.99
All seeming less than ideal
Does anyone have a resource for targeting stretchy orings , rather than the thicker Buna rubber ones more directed towards sealing?
I really need robust rubber bands, not seals. more a bike mount band kit
Either a discussion of this or a source . Onesies and twosies are more expensive and hard to reproduce results.
Most of mine came with sensors from China and OEM is not a good source.
Sources state:
"To provide an effective seal, the O-ring's inside diameter (I.D.) must be smaller than the piston groove diameter, so that the O-ring is slightly stretched, fitting snugly in the groove.
This stretch should be between 1%-5% with 2% as the ideal in most applications. A stretch greater than 5% is not recommended."
"With the O-ring calculator, engineers can specify the groove dimensions for a specific O-ring or a specific groove.
The O-ring calculator calculates the most relevant size O-ring for any given groove and includes O-ring inner diameter stretch and the desired Polymer Group or Seal Hardness. ."
Examples: Garmin Bike mount band kit (replacement) 6 for $15.77,CatEye CA5447010 Rapid X Spare Bands- 2 for 8.95,Ascher Bike Silicone Mount Band, Cycling Bicycle Rubber Straps, Pack of 4 $6.99
All seeming less than ideal
The Garmin o-rings are designed for the purpose you are interested in.
#12
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
Garmin gives you multiple mounts with most of their devices and a slew of o-rings to fasten them on. Why are you swapping mounts? If you don't have the right mount for all your bikes, then get multiple mounts so you aren't constantly stretching and relaxing the o-rings and subjecting them to wear, abrasion and nicks.
Most everything Garmin on a bicycle uses a 1/4 turn mount. Garmin makes all sorts of variations of that mount to fit bars, stays, seat post or where ever you want to put them. And many third party vendors have their own version of the Garmin 1/4 turn mount that is even more inexpensive or more costly depending on what you want.
Don't be switching mounts from bike to bike.
Most everything Garmin on a bicycle uses a 1/4 turn mount. Garmin makes all sorts of variations of that mount to fit bars, stays, seat post or where ever you want to put them. And many third party vendors have their own version of the Garmin 1/4 turn mount that is even more inexpensive or more costly depending on what you want.
Don't be switching mounts from bike to bike.
Likes For Iride01:
#13
Senior Member
Thread Starter
Join Date: Jul 2006
Location: TX
Posts: 518
Bikes: Downtube IX NS&FS, Dahon Speed8Pro/Matrix/Curve, Brom S2L,Montague Para, ICE-XL w/Rollie/Schlumpf, Trident Spike, ebikes, BFSatRDay
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 94 Times
in
80 Posts
Thanks @Irideo1.
For the ones I ride regularly, good mounts rock. Still, I have to constantly reconfigure, and the Orings become a consumable.
I have a roadie, a "touring" setup for trailering utility, several foldies, and a trainer.
Plus occasional MTB and new builds. Champagne problem, right? At least I make them work for their living.
Temporary mountings with the orings are useful, but they are vulnerable, needing trustworthy Orings, and tape/tethers.
I use permanent mounts where I can and they are indeed hard to move around, and nice ones pricey.
Permanent mounts and separate sensors for each bike would be a spiraling complexity.
inexpensive mounts for low stress installs , like the trainer, compete with the price for OEM Orings (!), but is pretty reasonable for the head unit.
Another problem with permanent mounts is the limited real estate on the seat tube, for bags, lights and trailer hitch, complicating flexible configuration.
The head unit wants a stout mount, and heavily loads the Garmin mount , which was designed for watch size units.
The biggest challenge is for cadence sensors and hub mount speed sensors, which don't have separate mounts,
and the rear facing Varia which needs differing positioning for each bike ,
has a funky mount, and doesn't have flexible mounting well thought out by Garmin.
I'm not trying to belabor it, but having a 10cent consumable selling for $4 chafes when needed in bulk,
and losing lights and sensors likewise.
Wanting to keep it fun and safe
For the ones I ride regularly, good mounts rock. Still, I have to constantly reconfigure, and the Orings become a consumable.
I have a roadie, a "touring" setup for trailering utility, several foldies, and a trainer.
Plus occasional MTB and new builds. Champagne problem, right? At least I make them work for their living.
Temporary mountings with the orings are useful, but they are vulnerable, needing trustworthy Orings, and tape/tethers.
I use permanent mounts where I can and they are indeed hard to move around, and nice ones pricey.
Permanent mounts and separate sensors for each bike would be a spiraling complexity.
inexpensive mounts for low stress installs , like the trainer, compete with the price for OEM Orings (!), but is pretty reasonable for the head unit.
Another problem with permanent mounts is the limited real estate on the seat tube, for bags, lights and trailer hitch, complicating flexible configuration.
The head unit wants a stout mount, and heavily loads the Garmin mount , which was designed for watch size units.
The biggest challenge is for cadence sensors and hub mount speed sensors, which don't have separate mounts,
and the rear facing Varia which needs differing positioning for each bike ,
has a funky mount, and doesn't have flexible mounting well thought out by Garmin.
I'm not trying to belabor it, but having a 10cent consumable selling for $4 chafes when needed in bulk,
and losing lights and sensors likewise.
Wanting to keep it fun and safe
#14
Senior Member
Join Date: Sep 2017
Location: Upstate SC
Posts: 1,680
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 806 Post(s)
Liked 1,612 Times
in
764 Posts
Ask yourself this - which is less expensive? Multiple mounts on your multiple bikes, so you can move sensors from one to the other, or replacing a lost sensor because you didn't want to spend $4 on a $0.10 item?
#15
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,241
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4222 Post(s)
Liked 1,322 Times
in
916 Posts
Thanks @Iride
I'm not trying to belabor it, but having a 10cent consumable selling for $4 chafes when needed in bulk,
and losing lights and sensors likewise.
I'm not trying to belabor it, but having a 10cent consumable selling for $4 chafes when needed in bulk,
and losing lights and sensors likewise.
#16
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
Lights? Does Garmin make lights for bikes other than Varia radar? That comes with both a cheapo plastic mount and bands or a better clamp on mount with adapters for tube size.
Still I can't see changing mounts between bikes, which you sort of said you don't do, but then you said you are always re-configuring. So I'm still at loss to understand why you have to move the mount so much. The device, yes, the mount no.
And if the lights and other things you are moving or reconfiguring the mounts for aren't Garmin, then I guess I've no idea how good their bands (o-rings) might be. Maybe they just used the cheapest they could find that have no UV resistance or are otherwise intended to remain stretched. A o-ring intended to be a seal wouldn't need UV resistance or would it remain stretched after it's installed.
#17
Senior Member
Thread Starter
Join Date: Jul 2006
Location: TX
Posts: 518
Bikes: Downtube IX NS&FS, Dahon Speed8Pro/Matrix/Curve, Brom S2L,Montague Para, ICE-XL w/Rollie/Schlumpf, Trident Spike, ebikes, BFSatRDay
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 94 Times
in
80 Posts
Iride01 I build and collect. Short of being like DCRainmaker, but still have to configure cadence sensors lights and head unit s between Foldies , commuter, roady, mtb, ebike and trike for different settings, plus the new builds, and different setups for different rides.
I go though a fair number of bands and like to standardize as much as possible.
It'll be easier when I get the chip put in my neck or a PAN like universal module.
I go though a fair number of bands and like to standardize as much as possible.
It'll be easier when I get the chip put in my neck or a PAN like universal module.
#18
Senior Member
I don't know if this is still timely for Bike^3, but have you tried shopping for rings at the McMaster-Carr site? Often they list objects based on real technical specs, which may be more useful.
Likes For Road Fan: