Fixing a Fixie,back to a road bike Guerciotti
#26
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
The bottom bracket
#27
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
#29
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
and the other view.
#30
Senior Member
Join Date: Aug 2012
Location: Seattle
Posts: 507
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 144 Times
in
88 Posts
Nice job! That looks great!
Check this page for the tap for the rear dropout adjusters:
Framebuilding.com
About half way down is the tap. It looks xtra long so, not sure if you could find one locally;
Art.33. M3 Tap for Rear Dropout Adjuster Holes £14.29 (£11.91 outside EU*)
Check this page for the tap for the rear dropout adjusters:
Framebuilding.com
About half way down is the tap. It looks xtra long so, not sure if you could find one locally;
Art.33. M3 Tap for Rear Dropout Adjuster Holes £14.29 (£11.91 outside EU*)
__________________
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
#31
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
Nice job! That looks great!
Check this page for the tap for the rear dropout adjusters:
Framebuilding.com
About half way down is the tap. It looks xtra long so, not sure if you could find one locally;
Art.33. M3 Tap for Rear Dropout Adjuster Holes £14.29 (£11.91 outside EU*)
Check this page for the tap for the rear dropout adjusters:
Framebuilding.com
About half way down is the tap. It looks xtra long so, not sure if you could find one locally;
Art.33. M3 Tap for Rear Dropout Adjuster Holes £14.29 (£11.91 outside EU*)
Thanks for the Info source.
#32
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
A warning, M3 taps are VERY easy to break in the drop out. Heightened care and lots of lube are the norm. Andy
__________________
AndrewRStewart
AndrewRStewart
#33
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
Maybe i should have asked for a List of Thread sizes for all the threads on the bike.
#34
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
The 3mmx.5mm for the drop out axle positioning screws
10mmx26tpi for the der mount (yes a mix of metric and SAE, this is a bike after all)
36mmx24tpi likely for the BB shell (both RH as it's likely Itl)
25.4mmx24tpi for the headset (or English 1"x24tpi, they are class B+ interchanges)
M5 bottle bosses and drop out eyes
But as they say, measure twice assume no times. Andy
__________________
AndrewRStewart
AndrewRStewart
#35
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
I assume you are jesting. This isn't the modern auto business where every part is documented. But this frame likely only uses 5, or so, thread dimensions.
The 3mmx.5mm for the drop out axle positioning screws
10mmx26tpi for the der mount (yes a mix of metric and SAE, this is a bike after all)
36mmx24tpi likely for the BB shell (both RH as it's likely Itl)
25.4mmx24tpi for the headset (or English 1"x24tpi, they are class B+ interchanges)
M5 bottle bosses and drop out eyes
But as they say, measure twice assume no times. Andy
The 3mmx.5mm for the drop out axle positioning screws
10mmx26tpi for the der mount (yes a mix of metric and SAE, this is a bike after all)
36mmx24tpi likely for the BB shell (both RH as it's likely Itl)
25.4mmx24tpi for the headset (or English 1"x24tpi, they are class B+ interchanges)
M5 bottle bosses and drop out eyes
But as they say, measure twice assume no times. Andy
#36
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
the 5mm threads have .8mm pitch, which is the standard coarse metric thread. If it had a 6mm thread anywhere,, they would be 6x1
Thread
Thread Starter
Forum
Replies
Last Post
goldfinch
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
16
03-03-19 04:17 AM
mapleleafs-13
Classic & Vintage
12
12-31-13 03:20 PM
tenors
Bicycle Mechanics
120
11-16-10 08:36 PM