Can I use 6 speed chain on single speed
#1
Live Healthy
Thread Starter
Join Date: Jun 2020
Posts: 417
Bikes: Wabi Classic
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 183 Post(s)
Liked 137 Times
in
92 Posts
Can I use 6 speed chain on single speed
I’m thinking of buying an Izumi es40c chain from Amazon but it’s for 6 speed chain. I know these chains are made for shifting but how stable will it be on a single speed? My drive train requires me to use a 3/32 chain (16t White Industry freewheel).
#2
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,757
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1331 Post(s)
Liked 763 Times
in
431 Posts
A 6-speed chain is a 3/32” chain, so it should work fine. The only difference is the outer width, which has no effect on it fitting properly on the chainring and freewheel.
#5
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,458
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4330 Post(s)
Liked 3,955 Times
in
2,644 Posts
It will work but don't buy the wrong stuff and especially through Billionaire Jeff Bezos' Amazon. If you need to buy online go here
The chain is cheaper and you are buying from a brick and mortar shop run by a member of the forum and it is the correct size and for a single speed.
The chain is cheaper and you are buying from a brick and mortar shop run by a member of the forum and it is the correct size and for a single speed.
#6
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,776
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3582 Post(s)
Liked 3,394 Times
in
1,928 Posts
If your chainring and rear sprocket are both designed for 3/32" chain, you can use either 3/32" or 1/8" chain with them. If either the chainring or rear sprocket or both are designed for 1/8" chain, you can only use 1/8" chain.
Likes For JohnDThompson:
#7
Full Member
Join Date: Aug 2018
Posts: 303
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 99 Post(s)
Liked 115 Times
in
78 Posts
Absolutely, the chain must be as wide as your thickest cog. Many single speed drive trains are 1/8" in which case you need a 1/8" chain.
Some single speeds have narrower chain rings and rear cogs, in which case a narrower chain will fit — although you could use a 1/8" chain if you preferred.
Too much flexibility is not a problem. A derailleur system needs side to side flexibility. As a single speed pulls in a straight line all the time, the flexibility is irrelevant: neither harm nor benefit.
Many derailleur chains are designed to facilitate shifting. This will neither help nor hinder on a single speed.
Personally, I'd say buy a cheap 1/8" chain because it will fit any single speed set up.
Some single speeds have narrower chain rings and rear cogs, in which case a narrower chain will fit — although you could use a 1/8" chain if you preferred.
Too much flexibility is not a problem. A derailleur system needs side to side flexibility. As a single speed pulls in a straight line all the time, the flexibility is irrelevant: neither harm nor benefit.
Many derailleur chains are designed to facilitate shifting. This will neither help nor hinder on a single speed.
Personally, I'd say buy a cheap 1/8" chain because it will fit any single speed set up.
#8
Live Healthy
Thread Starter
Join Date: Jun 2020
Posts: 417
Bikes: Wabi Classic
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 183 Post(s)
Liked 137 Times
in
92 Posts
FREEWHEELS ? White Industries
#9
Full Member
Join Date: Aug 2018
Posts: 303
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 99 Post(s)
Liked 115 Times
in
78 Posts
Post edited out to avoid misleading the OP as TejanoTrackie has pointed out I was wrong in this specific instance.
Last edited by Mikefule; 04-14-21 at 11:46 PM. Reason: Factual error
#10
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,757
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1331 Post(s)
Liked 763 Times
in
431 Posts
Actually, @jay4usc is correct in this specific instance of the 16T White Industries SS freewheel. The problem isn’t the width of the chain, but rather that the freewheel body diameter is larger than other freewheels such that a 1/8” chain will bottom out on the body with a 16T cog. This is because the side plates of a 1/8” chain are slightly taller at the pins than a 3/32” chain. This would not be the case with any other brand of SS freewheel.
Likes For TejanoTrackie: