What to do with a repainted '78 TX700?
#1
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
What to do with a repainted '78 TX700?
I'm totally scatterbrained on what to do about this bike. It's a "not so nice" repaint that has since been badly scratched over the repaint. The derailleurs are nice. The wheels original and the handlebars and seatpost stock. The shifters are campy frictions. Cantilever braze-ons were added later which precipitated the repaint. The thing cost $100 so there was no possible way to walk away.
The question is, now what. My initial reaction is to strip and clean, repaint, order new decals, add some brifters (I already have) and change very little else. The resale should net a nice profit and put a nice bike back to be enjoyed. I could strip and sell the parts and frame separately without doing much of anything. That rubs me the wrong way. I will see if a application of turp. will remove that brownish repaint. Maybe I could just touch up the blue scratches, add some Suntour barends, a rack and a decent saddle and tape and call it a day.
I invite anyone to weigh in on my project. The more, the merrier.
#2
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
Does it fit? Go custom, then. Strip it and get it powder coated, and pick a single color you like, since the canti posts already deviate from stock. Pick some custom decals (not fakes, just make up your own) or leave it bare.
#3
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,326
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,825 Times
in
2,228 Posts
Call it 'the winter bike' and ride it.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#4
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,832
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 603 Post(s)
Liked 1,062 Times
in
534 Posts
Nice bike, and my size. If mine, I would strip the frame and take it to Yellow Jersey for a complete repaint with decals. No location in your info, so you might have to ship it. Or, if you want cheap, just powder coat it. I’d offer to buy it from you, but already have a perfect 77 TX900 in the same size, so a bit redundant.
Tim
Tim
#6
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,410
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 524 Post(s)
Liked 977 Times
in
509 Posts
I'm following this thread because I'm in a similar situation. I recently acquired a Fuji S12-S with rough paint and missing several of the original parts. I could spring for a nice repaint or powder coat, but I don't care for the original color, so I am not planning to keep it original. Right now I am thinking I will paint it myself and upgrade some parts to make it into a nice all day bike. I just got it road worthy, so I may change my mind once I put a few miles on it.
#7
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,601
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3869 Post(s)
Liked 6,454 Times
in
3,192 Posts
I could strip and sell the parts and frame separately without doing much of anything.
Likes For SurferRosa:
#8
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,149
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2362 Post(s)
Liked 1,746 Times
in
1,190 Posts
You checked the serial number v. vintage-trek? Based on the braze-ons, that does NOT look like a '78. Or maybe the top tube guides and the under-the-stay rear der. cable stop were all part of the in-service braze job. That would be in keeping with the early '80s style paneled livery. If that's all so, I'd be tempted to tape off the panel, sand smooth the nicks/scratches, and re-spray it to a color apropos to the panel. IOW, perpetuate the disguise. The keep/sell question is a whole 'nother thing.
Edit - one factor to consider for the keep/sell question - From what I've seen as a "spectator", seems like tall bikes don't sell fast.
Edit - one factor to consider for the keep/sell question - From what I've seen as a "spectator", seems like tall bikes don't sell fast.
Last edited by madpogue; 10-17-19 at 03:41 PM.
#9
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
"Resale" where? Ebay? I'm in a big bike market, but the c&v target has dwindled. No way I could paint/decal a Trek and expect a local sale would net profit anymore. Especially one that size.
Unfortunately, that's now the way to make any $$ on a mid-level c&v with bad paint...
Unfortunately, that's now the way to make any $$ on a mid-level c&v with bad paint...
eBay still has a market for good c&v stuff. Mostly from the middle eastern part of the country or NY.
#10
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,326
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,825 Times
in
2,228 Posts
Winter - San Diego = when the number of visitors makes everything more crowded.
Winter - a state of mind, ride the beater = it's a frankenbike Frek.
edit: used to live in Imperial Beach in the 70s. Froze my tush on a cloudy and blustery 4th of July.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 10-17-19 at 05:26 PM.
#11
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,331
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 517 Times
in
280 Posts
With the added canti posts, it would be a perfect candidate for a gravel bike. If the brakes can be adjusted to fit 700c rims, it would probably fit at least 32mm tires.
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#12
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
Really big or really small frames do have a limited market but people who need them are really motivated so it's kinda a wash. I haven't seen much difference moving a frame regardless of size. I'm drawn to the larger frames cause I can give them a good shakedown ride after a rebuild, plus I'm always tempted to add another bike to my "keepers" supply.🚲🚲🚲🚲
#13
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,834
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,809 Times
in
1,534 Posts
ok pub bike or other for anywhere else you want to go and not worry to much about it
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#15
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,386
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,686 Times
in
2,509 Posts
that's not a '78 headbadge, they were attached with screws back then. Not sure when they switched to the glued on headbadges. That's one way I know if it's possible I built the frame.
#16
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
I'm in the NYC burbs. I'll try a CL push, though the eBay crowd and CL buyers seem like different folks to me for the most part. My recent eBay bike/frame sales have all been out west... go figure. I always offer pickup, and would even meet-up after getting paid, but nooo, gotta pack and ship (and give ebay 10% of big shipping cost).
#18
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
I'm in the NYC burbs. I'll try a CL push, though the eBay crowd and CL buyers seem like different folks to me for the most part. My recent eBay bike/frame sales have all been out west... go figure. I always offer pickup, and would even meet-up after getting paid, but nooo, gotta pack and ship (and give ebay 10% of big shipping cost).
#19
Senior Member
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,609
Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Liked 370 Times
in
219 Posts
#20
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
My new guess is '83. All models had the cable routed below the BB, the head badge got glued from 81 on and the only part of the serial number designating the year I can see is a rounded curve near the bottom.
#21
Senior Member
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,609
Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Liked 370 Times
in
219 Posts
And if it was mine I think I’d try to strip the new paint and see if the original is under it, then clear over any scratches and wax the frame.
Looks like a looong reach to those down tube shifters so I’d put some bar ends on it. I think a rando set up would be real classy. Polished fenders, a bar bag upfront, under seat roll bag, and lights, widest rubber you can fit.
Looks like a looong reach to those down tube shifters so I’d put some bar ends on it. I think a rando set up would be real classy. Polished fenders, a bar bag upfront, under seat roll bag, and lights, widest rubber you can fit.
#22
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,149
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2362 Post(s)
Liked 1,746 Times
in
1,190 Posts
That said, there are "time slip" bikes out there. I have one with a serial number for an '82 400-series. Frame size is consistent with the serial #, but it has an Ishiwata 022 fork, rack braze-ons, and '83-style under-the-BB cable routing. It also appears to be a respray. If you nose around on the other Trek threads here, you see references to similar bikes where the serial number and base features (exclusive of components) don't seem to match.
Last edited by madpogue; 10-18-19 at 01:34 PM.
#23
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,386
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,686 Times
in
2,509 Posts
Is there really new paint on there? That looks original to me. I'm probably missing something
#24
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,642
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,694 Times
in
933 Posts
is that a bottle boss on the underside of the DT?
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.