Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Fausto Coppi Reparto Corse

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Fausto Coppi Reparto Corse

Old 11-28-20, 02:36 AM
  #1  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Fausto Coppi Reparto Corse

I picked this up today. I'm not sure what I'm going to do with it yet. It's quite a canvas to work with. It's obviously got a modern vibe, which plays into my tastes. It may feel modern enough to go Shimano. I think either black or silver components could work.





















Using Coppi's name for branding like this seems a bit hokey. I think this bike was built in 1997. On the other hand, it was the bike Team Polti raced on so it has some pedigree. Plus, it's just a nice frame. I found it looking for the later Columbus tubing blends on eBay.

What do you think? Any build suggestions?
__________________
My Bikes
Andy_K is offline  
Likes For Andy_K:
Old 11-28-20, 03:17 AM
  #2  
ooga-booga
lead on, macduff!
 
ooga-booga's Avatar
 
Join Date: Apr 2009
Location: san diego (uni/normal heights), california
Posts: 5,860

Bikes: 85 pinarello treviso steel, 88 nishiki olympic steel. 95 look kg 131 carbon, 11 trek madone 5.2 carbon

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 877 Post(s)
Liked 950 Times in 521 Posts
had a 2002 coppi ksc aluminum/carbon frame which was my favorite frame of all time and put 50k+ miles on it until it got "retired" by a rear end collision in dec 2019.
once in a while, one of the steel frames will flash across the sales mediums but not often. there aren't a lot of coppi frames out there. the frame i had was
the same frame that salvodelli (il falco) won the giro on in 2002. i have come this close to picking up one of the columbus neuron steel framesets multiple
times but it was always a sizing or condtion issue. geometry seemed more relaxed...similar to the lemond frames in the same late 90's-early 2000's time period.

Last edited by ooga-booga; 11-28-20 at 03:24 AM.
ooga-booga is offline  
Likes For ooga-booga:
Old 11-28-20, 04:19 AM
  #3  
nomadmax 
Senior Member
 
Join Date: Jun 2018
Location: SW Ohio
Posts: 1,699
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 959 Times in 493 Posts
I have but two words:

Campagnolo

Ride
__________________
nomadmax is offline  
Old 11-28-20, 06:33 AM
  #4  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 13,779
Mentioned: 317 Post(s)
Tagged: 0 Thread(s)
Quoted: 1956 Post(s)
Liked 1,278 Times in 697 Posts
I think you need to find or have made Coppi pantographed parts as it’s not quite over the top yet with its Coppi branding.
nlerner is offline  
Likes For nlerner:
Old 11-28-20, 07:11 AM
  #5  
joesch
Senior Member
 
joesch's Avatar
 
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 775

Bikes: 83 Colnago Super, 87 50th Daccordi, 87 Guerciotti, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 08 Lemond Filmore, 12 Cervelo R3

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 238 Post(s)
Liked 128 Times in 91 Posts
Originally Posted by ooga-booga View Post
had a 2002 coppi ksc aluminum/carbon frame which was my favorite frame of all time and put 50k+ miles on it until it got "retired" by a rear end collision in dec 2019.
once in a while, one of the steel frames will flash across the sales mediums but not often. there aren't a lot of coppi frames out there. the frame i had was
the same frame that salvodelli (il falco) won the giro on in 2002. i have come this close to picking up one of the columbus neuron steel framesets multiple
times but it was always a sizing or condtion issue. geometry seemed more relaxed...similar to the lemond frames in the same late 90's-early 2000's time period.
Agree that those frames are some of the best frame building and riding experiences. I also had a neuron setup that rode like a dream. Genius was suppose to be an improvement on that and I would like to find out ...
joesch is offline  
Old 11-28-20, 08:45 AM
  #6  
jamesdak 
Senior Member
 
Join Date: Aug 2010
Location: Utah
Posts: 6,290

Bikes: Too many to keep this current.

Mentioned: 108 Post(s)
Tagged: 0 Thread(s)
Quoted: 1511 Post(s)
Liked 697 Times in 379 Posts
Sweet bike!

Appearance wise that's a lot like the Duell frame I got back on the road this year. I too debated black or silver components. Finally able to get a better deal on black Campagnolo parts and went that way. If it helps here's how it looks with the black.

__________________
Steel is real...and comfy.
jamesdak is offline  
Old 11-28-20, 08:46 AM
  #7  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 2,588

Bikes: 81 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 355 Times in 252 Posts
9 Speed Dura Ace would be perfect. Also some modestly aero tubular rims with < 25mm tires.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Old 11-28-20, 10:38 AM
  #8  
T-Mar
Senior Member
 
Join Date: Nov 2004
Posts: 20,529
Mentioned: 549 Post(s)
Tagged: 1 Thread(s)
Quoted: 3617 Post(s)
Likes: 0
Liked 1,002 Times in 759 Posts
Given that Polti was supplied by Shimano in 1997, 7700 series Dura-Ace would be the obvious choice, despite the Italian frame.
T-Mar is offline  
Old 11-28-20, 11:18 AM
  #9  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Originally Posted by nlerner View Post
I think you need to find or have made Coppi pantographed parts as its not quite over the top yet with its Coppi branding.
Excellent suggestion. I count 16 places that it says Coppi right now. With pantographed parts I could get that up over 20. I believe the original saddle also had the Coppi name embroidered on it.
__________________
My Bikes
Andy_K is offline  
Likes For Andy_K:
Old 11-28-20, 11:19 AM
  #10  
LucasHartong
Senior Member
 
LucasHartong's Avatar
 
Join Date: Aug 2016
Location: Netherlands, near the sea
Posts: 366

Bikes: Gazelle Tour de l'Avenir '76, Koga Miyata World Traveller '90, Giant Peloton Superlite '90, Fausto Coppi '95, Cascarsi '96, Giant Atlanta '97, Cube Peloton Race '16, Pashley Classic 33 workbike.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 53 Times in 24 Posts
Full Campagnolo.

LucasHartong is offline  
Likes For LucasHartong:
Old 11-28-20, 11:21 AM
  #11  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Originally Posted by T-Mar View Post
Given that Polti was supplied by Shimano in 1997, 7700 series Dura-Ace would be the obvious choice, despite the Italian frame.
Good point about Poltis equipment.
__________________
My Bikes
Andy_K is offline  
Old 11-28-20, 11:24 AM
  #12  
LucasHartong
Senior Member
 
LucasHartong's Avatar
 
Join Date: Aug 2016
Location: Netherlands, near the sea
Posts: 366

Bikes: Gazelle Tour de l'Avenir '76, Koga Miyata World Traveller '90, Giant Peloton Superlite '90, Fausto Coppi '95, Cascarsi '96, Giant Atlanta '97, Cube Peloton Race '16, Pashley Classic 33 workbike.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 53 Times in 24 Posts

LucasHartong is offline  
Likes For LucasHartong:
Old 11-28-20, 11:29 AM
  #13  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Originally Posted by jamesdak View Post
Sweet bike!

Appearance wise that's a lot like the Duell frame I got back on the road this year. I too debated black or silver components. Finally able to get a better deal on black Campagnolo parts and went that way. If it helps here's how it looks with the black.

Originally Posted by LucasHartong View Post
Full Campagnolo.

This is very helpful. Ive got a yellow LeMond with black 105 components that I was thinking of moving over to the Coppi. I wasnt sure how the black would work with the green accents. I think what these pics have done is to verify my earlier hypothesis that either black or silver would work. The lure of Campagnolo parts on an Italian bike is almost irresistible, but Ive already got a lot of full Campy bikes and Id get it on the road sooner with Shimano. Decisions, decisions.
__________________
My Bikes
Andy_K is offline  
Old 11-28-20, 11:35 AM
  #14  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
@LucasHartong does yours have the year stamped on the bottom bracket? Mine has what looks like a serial number (ominously, it’s “1960”) next to — but distinctly separate from — “97” and “57”, the latter being the frame size.
__________________
My Bikes

Last edited by Andy_K; 11-28-20 at 11:48 AM.
Andy_K is offline  
Old 11-28-20, 11:41 AM
  #15  
T-Mar
Senior Member
 
Join Date: Nov 2004
Posts: 20,529
Mentioned: 549 Post(s)
Tagged: 1 Thread(s)
Quoted: 3617 Post(s)
Likes: 0
Liked 1,002 Times in 759 Posts
Silver Dura-Ace 7700 on the 1997 team Polti bicycles...
T-Mar is offline  
Likes For T-Mar:
Old 11-28-20, 11:53 AM
  #16  
LucasHartong
Senior Member
 
LucasHartong's Avatar
 
Join Date: Aug 2016
Location: Netherlands, near the sea
Posts: 366

Bikes: Gazelle Tour de l'Avenir '76, Koga Miyata World Traveller '90, Giant Peloton Superlite '90, Fausto Coppi '95, Cascarsi '96, Giant Atlanta '97, Cube Peloton Race '16, Pashley Classic 33 workbike.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 53 Times in 24 Posts
Originally Posted by Andy_K View Post
@LucasHartong does yours have the year stamped on the bottom bracket? Mine has what looks like a serial number (ominously, its 1960) next to but distinctly separate from 97 and 57, the latter being the frame size.
I made a thread about this bike -> https://www.bikeforums.net/classic-v...oppi-find.html
LucasHartong is offline  
Likes For LucasHartong:
Old 11-28-20, 11:53 AM
  #17  
jamesdak 
Senior Member
 
Join Date: Aug 2010
Location: Utah
Posts: 6,290

Bikes: Too many to keep this current.

Mentioned: 108 Post(s)
Tagged: 0 Thread(s)
Quoted: 1511 Post(s)
Liked 697 Times in 379 Posts
Well, I have to admit I've got several bikes running Dura Ace 7700 and love them. Good stuff!
__________________
Steel is real...and comfy.
jamesdak is offline  
Old 11-28-20, 12:05 PM
  #18  
LucasHartong
Senior Member
 
LucasHartong's Avatar
 
Join Date: Aug 2016
Location: Netherlands, near the sea
Posts: 366

Bikes: Gazelle Tour de l'Avenir '76, Koga Miyata World Traveller '90, Giant Peloton Superlite '90, Fausto Coppi '95, Cascarsi '96, Giant Atlanta '97, Cube Peloton Race '16, Pashley Classic 33 workbike.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 53 Times in 24 Posts
Originally Posted by Andy_K View Post
@LucasHartong does yours have the year stamped on the bottom bracket? Mine has what looks like a serial number (ominously, its 1960) next to but distinctly separate from 97 and 57, the latter being the frame size.
It only has "351", which probably is the serial number, and "58", which is the actual frame size.

LucasHartong is offline  
Old 11-28-20, 12:17 PM
  #19  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Originally Posted by LucasHartong View Post
It only has "351", which probably is the serial number, and "58", which is the actual frame size.
Thanks for the pic. Here's mine. The "57" is out of picture, just past the "97".

__________________
My Bikes
Andy_K is offline  
Old 11-28-20, 12:23 PM
  #20  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Originally Posted by Classtime View Post
9 Speed Dura Ace would be perfect. Also some modestly aero tubular rims with < 25mm tires.
I don't do <25mm tires. To my surprise, it looks like 28's will fit this frame as long as the front derailleur doesn't bump them. I also like to have triples on all my bikes (I know, not very fitting for a race bike), but I see that the 7700 group was available with a triple.
__________________
My Bikes
Andy_K is offline  
Old 11-28-20, 12:25 PM
  #21  
LucasHartong
Senior Member
 
LucasHartong's Avatar
 
Join Date: Aug 2016
Location: Netherlands, near the sea
Posts: 366

Bikes: Gazelle Tour de l'Avenir '76, Koga Miyata World Traveller '90, Giant Peloton Superlite '90, Fausto Coppi '95, Cascarsi '96, Giant Atlanta '97, Cube Peloton Race '16, Pashley Classic 33 workbike.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 53 Times in 24 Posts
Must be the frame number then.
LucasHartong is offline  
Old 11-28-20, 05:39 PM
  #22  
Andy_K 
Senior Member
Thread Starter
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,747

Bikes: Yes

Mentioned: 344 Post(s)
Tagged: 0 Thread(s)
Quoted: 2046 Post(s)
Liked 586 Times in 316 Posts
Alright, so let's get this build started. Let's assume for the moment that I'll probably end up with a Shimano drivetrain and brakes. Maybe silver, maybe black. TBD.

First step -- headset. I have on hand:

1. Miche Primato -- needle bearings -- if I'm not mistaken, this is the headset on the Duell that @jamesdak shared above
2. Campagnolo Super Record -- rider condition, a few wrench marks on the locknut -- might polish up nicely -- might be a little too much stack
3. Campagnolo Record Strada -- excellent condition -- very shiny

Would you choose one of these or shop for something else?
__________________
My Bikes
Andy_K is offline  
Old 11-28-20, 06:21 PM
  #23  
RobbieTunes
Banned
 
Join Date: Dec 2007
Posts: 27,246
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,359 Times in 876 Posts
Originally Posted by Andy_K View Post
I picked this up today. I'm not sure what I'm going to do with it yet. It's quite a canvas to work with.
What do you think? Any build suggestions?
Exactly how I feel about my Reparto Corse.

Mine is a similar color, with blue, as well. A newer model.
Genius tubing, Columbus Carve carbon wishbone and fork. From right here on BF C&V.
So far, a carbon crankset, 10-speed Ultegra FD, RD, calipers.
DA7900 down tube shifters, Soma brake levers.
To date, no wheels make sense.

I think you can get away with anything black.
RobbieTunes is offline  
Old 11-28-20, 06:31 PM
  #24  
VRJAKE
Junior Member
 
Join Date: Oct 2020
Location: Portland, Oregon
Posts: 8

Bikes: Bakers dozen is the limit!

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 3 Times in 1 Post
Originally Posted by Andy_K View Post
Alright, so let's get this build started. Let's assume for the moment that I'll probably end up with a Shimano drivetrain and brakes. Maybe silver, maybe black. TBD.

First step -- headset. I have on hand:

1. Miche Primato -- needle bearings -- if I'm not mistaken, this is the headset on the Duell that @jamesdak shared above
2. Campagnolo Super Record -- rider condition, a few wrench marks on the locknut -- might polish up nicely -- might be a little too much stack
3. Campagnolo Record Strada -- excellent condition -- very shiny

Would you choose one of these or shop for something else?
Vote for the Miche. Campagnolo and Shimano mixed causes me cognitive dissonance - they must be separated to retain me sanity.
VRJAKE is offline  
Old 11-28-20, 06:41 PM
  #25  
P!N20
Senior Member
 
P!N20's Avatar
 
Join Date: Aug 2010
Posts: 1,213
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 570 Post(s)
Liked 517 Times in 316 Posts
Originally Posted by T-Mar View Post
Silver Dura-Ace 7700 on the 1997 team Polti bicycles...
I will accept no wheels other than Spinergy Rev X.
P!N20 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.