Parts Source?
#1
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Parts Source?
I'm in the process of refurbing a GT MTB that I bought used and am looking for a source for some of the parts I may need. I would prefer to -not- source these sort of things from a local bike shop due to the crazy markup they will carry. For example - I may need to replace the springs on the direct-pull brakes. But, I'm guessing the cost for just those from a local shop would be anywhere from 50-100% of the cost of buying a complete set of brakes online to replace these. If I add in the cost of new hex-head bolts used in the attachment and adjustment areas (these are rusting), I'm probably looking at double the cost of new brakes.
I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail? This one is late 90's and has some surface rust on it. Since it appears to be painted (will be determining that soon) and not plated, I would like to replace it with an aluminum version.
I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail? This one is late 90's and has some surface rust on it. Since it appears to be painted (will be determining that soon) and not plated, I would like to replace it with an aluminum version.
#2
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
Now is the time to be supporting your local shop. If you want to be able to show them your bike in six months and ask them questions, they need to be in business.
Likes For aggiegrads:
#3
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Having said that, I have had good results with Tree Fort and Niagara among many others.
Likes For dsbrantjr:
#4
Senior Member
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times
in
259 Posts
That would be great if they would actually let anyone in the door. I called my LBS yesterday and if I wait two days to travel the 2 hours one way to stand on the sidewalk and try to shop, I am told I will also have to wear a mask or face a $500 fine from the city. I just gave up and will learn to do all my own bike service.
Likes For RH Clark:
#5
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,988
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1092 Post(s)
Liked 936 Times
in
601 Posts
If you're looking for period correct parts, then I'd scour EBay and Craigslist as that bike is on the older side.
#6
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
That would be great if they would actually let anyone in the door. I called my LBS yesterday and if I wait two days to travel the 2 hours one way to stand on the sidewalk and try to shop, I am told I will also have to wear a mask or face a $500 fine from the city. I just gave up and will learn to do all my own bike service.
The OP actually has a local shop to support.
Likes For aggiegrads:
#7
Senior Member
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times
in
259 Posts
Yes,I live in the boonies and would love to support my local shop but their current virus policy makes that impossible, so I wish them well but whatever happens is on them because they are more cautious, or whatever than the law requires.
#8
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,517
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,401 Times
in
2,058 Posts
Likes For dedhed:
#9
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have "plenty" of local shops, but A) their stock levels are predominantly focused around only what fits on the bikes they sell or have sold over the last couple of years. Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order." Additionally, I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me (close to an hour's drive).
With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
I wholeheartedly support my local businesses ALL of the time whenever I can. My research so far is showing me that I can't get what I want anywhere - let alone from a bike shop. And, for period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
I wholeheartedly support my local businesses ALL of the time whenever I can. My research so far is showing me that I can't get what I want anywhere - let alone from a bike shop. And, for period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
#10
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
I have "plenty" of local shops, but A) their stock levels are predominantly focused around only what fits on the bikes they sell or have sold over the last couple of years. Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order." Additionally, I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me (close to an hour's drive).
With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
I wholeheartedly support my local businesses ALL of the time whenever I can. My research so far is showing me that I can't get what I want anywhere - let alone from a bike shop. And, for period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
I wholeheartedly support my local businesses ALL of the time whenever I can. My research so far is showing me that I can't get what I want anywhere - let alone from a bike shop. And, for period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
Where do you live? Is there a co-op? They often have more vintage parts. Also, after a floor pump and hex keys, a good pair of cable cutters is probably the next-best investment in bike tools.
“Special order” is BS. Shops of a decent size just include what you need in their next order, and it doesn’t cost them any more. They wont discount, but it certainly shouldn’t cost more.
Last edited by aggiegrads; 04-30-20 at 01:19 PM.
#11
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
All fair points. I am spoiled by the number of competent local mechanics, co-ops, and service-minded shops in Portland. I am also fortunate that my favorite on-line shop is a 30 minute drive or a 2 hour ride - Universal Cycles.
Where do you live? Is there a co-op? They often have more vintage parts. Also, after a floor pump and hex keys, a good pair of cable cutters is probably the next-best investment in bike tools.
“Special order” is BS. Shops of a decent size just include what you need in their next order, and it doesn’t cost them any more. They wont discount, but it certainly shouldn’t cost more.
Where do you live? Is there a co-op? They often have more vintage parts. Also, after a floor pump and hex keys, a good pair of cable cutters is probably the next-best investment in bike tools.
“Special order” is BS. Shops of a decent size just include what you need in their next order, and it doesn’t cost them any more. They wont discount, but it certainly shouldn’t cost more.
I don't now about any co-ops as I've never looked. For right now, I have one bike that needs a few very small parts to make it back into a really nice piece of equipment. I think that, once I verify the intended rider likes it, I'm going to plan to strip it down to nothing and rebuild it from bare bones. Thorough cleaning all around, adjustments everywhere, re-greasing of all bearings, new cables, and thorough polishing of all of the chrome to remove the rust that's starting. I'll see what parts might need actual replacing at that point since I'll have it completely gutted down.
#12
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,558
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4365 Post(s)
Liked 4,006 Times
in
2,675 Posts
Wearing a mask is just good sense these days law or not. I wear a mask and gloves all day at work and we use a bunch of Isopropyl alcohol, do I enjoy it, NO but do I want this whole situation to end quickly, YES VERY VERY YES!
#13
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,369
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6222 Post(s)
Liked 4,222 Times
in
2,368 Posts
You are penalizing the shop for something outside of their control. Try to be understanding and reasonable. “Their current virus policy” may not be theirs. As there is a fine for not wearing a mask, there definitely seems an element of local regulation there. And, frankly, it’s not all that unreasonable. The shop is trying to avoid having their workers get sick. Those are workers who likely have minimum insurance if any at all and don’t make much money.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#14
Full Member
OP: I would prefer to -not- source these sort of things from a local bike shop due to the crazy markup they will carry. For example - I may need to replace the springs on the direct-pull brakes. But, I'm guessing the cost for just those from a local shop would be anywhere from 50-100% of the cost of buying a complete set of brakes online
Crazy markup? Even if small parts are marked up 2x or more, open your eyes. That's just on small parts. Even the big box DIY centers have that kind of markup on nuts, bolts, etc. Your guessing at the cost compared to new online prices is just a guess.
OP: Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order."
Again, your paranoia. They're not snickering and it's usually not complicated. 90% of the time, the shop finds exactly what you need from QBP, and they drop it into the shopping cart, and it'll be ordered the next time they order.
OP: I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
OP: With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
You actually want the shop to to measure your derailleur cables bend by bend, cut them, do the same for the other cables and housing? If that Outpost has OEM cable housings, I'd bet you $20 that those housings are too long. And therefore the cables would be too long? Why don't you invest in a set of cable cutters so you never have to go through this again? Yeah, there is markup on those cable cutters too.
OP: Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail?
Again, your LBS is your friend. That is a generic part, but there are different widths. I think you'd be surprised how cheap an LBS can you one. I bet they can get you one for $15. And that's brand new. Or you can spend your time scavenging (though that can be fun!)
OP: or period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
Again, you'd be surprised. Every LBS has a junk drawer. Any decent shop should let you rummage through it. And the longer the shop has been there, the bigger the drawer is.
OP: I wholeheartedly support my local businesses ALL of the time whenever I can.
Doesn't sound like it to me.
OP: I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me
That can be tough, I hear it a lot. Shop around. I'm the same way, if I don't like a business they'll never see me again. Maybe you should focus on specific people at each shop. Hopefully multiple visits will build rapport. There are more good folks working at LBSs than bad ones. Find the good ones and support them.
As for bike co-ops, that could be a great source of small parts, but don't get your hopes up. If they have a small part you may need, chances are they need it to get one of their bikes up and running, they're not going to be stocking parts.
Crazy markup? Even if small parts are marked up 2x or more, open your eyes. That's just on small parts. Even the big box DIY centers have that kind of markup on nuts, bolts, etc. Your guessing at the cost compared to new online prices is just a guess.
OP: Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order."
Again, your paranoia. They're not snickering and it's usually not complicated. 90% of the time, the shop finds exactly what you need from QBP, and they drop it into the shopping cart, and it'll be ordered the next time they order.
OP: I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
OP: With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
You actually want the shop to to measure your derailleur cables bend by bend, cut them, do the same for the other cables and housing? If that Outpost has OEM cable housings, I'd bet you $20 that those housings are too long. And therefore the cables would be too long? Why don't you invest in a set of cable cutters so you never have to go through this again? Yeah, there is markup on those cable cutters too.
OP: Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail?
Again, your LBS is your friend. That is a generic part, but there are different widths. I think you'd be surprised how cheap an LBS can you one. I bet they can get you one for $15. And that's brand new. Or you can spend your time scavenging (though that can be fun!)
OP: or period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
Again, you'd be surprised. Every LBS has a junk drawer. Any decent shop should let you rummage through it. And the longer the shop has been there, the bigger the drawer is.
OP: I wholeheartedly support my local businesses ALL of the time whenever I can.
Doesn't sound like it to me.
OP: I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me
That can be tough, I hear it a lot. Shop around. I'm the same way, if I don't like a business they'll never see me again. Maybe you should focus on specific people at each shop. Hopefully multiple visits will build rapport. There are more good folks working at LBSs than bad ones. Find the good ones and support them.
As for bike co-ops, that could be a great source of small parts, but don't get your hopes up. If they have a small part you may need, chances are they need it to get one of their bikes up and running, they're not going to be stocking parts.
#15
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
OP: I would prefer to -not- source these sort of things from a local bike shop due to the crazy markup they will carry. For example - I may need to replace the springs on the direct-pull brakes. But, I'm guessing the cost for just those from a local shop would be anywhere from 50-100% of the cost of buying a complete set of brakes online
Crazy markup? Even if small parts are marked up 2x or more, open your eyes. That's just on small parts. Even the big box DIY centers have that kind of markup on nuts, bolts, etc. Your guessing at the cost compared to new online prices is just a guess.
OP: Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order."
Again, your paranoia. They're not snickering and it's usually not complicated. 90% of the time, the shop finds exactly what you need from QBP, and they drop it into the shopping cart, and it'll be ordered the next time they order.
OP: I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
OP: With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
You actually want the shop to to measure your derailleur cables bend by bend, cut them, do the same for the other cables and housing? If that Outpost has OEM cable housings, I'd bet you $20 that those housings are too long. And therefore the cables would be too long? Why don't you invest in a set of cable cutters so you never have to go through this again? Yeah, there is markup on those cable cutters too.
OP: Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail?
Again, your LBS is your friend. That is a generic part, but there are different widths. I think you'd be surprised how cheap an LBS can you one. I bet they can get you one for $15. And that's brand new. Or you can spend your time scavenging (though that can be fun!)
OP: or period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
Again, you'd be surprised. Every LBS has a junk drawer. Any decent shop should let you rummage through it. And the longer the shop has been there, the bigger the drawer is.
OP: I wholeheartedly support my local businesses ALL of the time whenever I can.
Doesn't sound like it to me.
OP: I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me
That can be tough, I hear it a lot. Shop around. I'm the same way, if I don't like a business they'll never see me again. Maybe you should focus on specific people at each shop. Hopefully multiple visits will build rapport. There are more good folks working at LBSs than bad ones. Find the good ones and support them.
As for bike co-ops, that could be a great source of small parts, but don't get your hopes up. If they have a small part you may need, chances are they need it to get one of their bikes up and running, they're not going to be stocking parts.
Crazy markup? Even if small parts are marked up 2x or more, open your eyes. That's just on small parts. Even the big box DIY centers have that kind of markup on nuts, bolts, etc. Your guessing at the cost compared to new online prices is just a guess.
OP: Anything else and they have to order it in which adds time and ends up being super expensive because it's a "special order."
Again, your paranoia. They're not snickering and it's usually not complicated. 90% of the time, the shop finds exactly what you need from QBP, and they drop it into the shopping cart, and it'll be ordered the next time they order.
OP: I will need to replace the shift and brake cables and will source those locally so that they can be matched up directly against the ones I'm replacing for length.
OP: With regard to cables, I understand that the cables have to be trimmed - that's actually what I was sort of saying in my post. There's one shop close by that I can hand them the cable that I take off and they will cut the cable and the sheath both to the correct size for me, AND they can provide the correct ends to slip onto the sheath prior to installation. That way, they are trimmed correctly and I don't have to do it.
You actually want the shop to to measure your derailleur cables bend by bend, cut them, do the same for the other cables and housing? If that Outpost has OEM cable housings, I'd bet you $20 that those housings are too long. And therefore the cables would be too long? Why don't you invest in a set of cable cutters so you never have to go through this again? Yeah, there is markup on those cable cutters too.
OP: Does anyone know where I can possibly find a correct handlebar for a GT Outpost Trail?
Again, your LBS is your friend. That is a generic part, but there are different widths. I think you'd be surprised how cheap an LBS can you one. I bet they can get you one for $15. And that's brand new. Or you can spend your time scavenging (though that can be fun!)
OP: or period-specific parts, bike shops aren't going to have 20+ year old parts just sitting around.
Again, you'd be surprised. Every LBS has a junk drawer. Any decent shop should let you rummage through it. And the longer the shop has been there, the bigger the drawer is.
OP: I wholeheartedly support my local businesses ALL of the time whenever I can.
Doesn't sound like it to me.
OP: I have been extremely underwhelmed with overall level of experience, knowledge, and skill from the repair departments. The ONE shop that I have a good repair experience with is quite far away from me
That can be tough, I hear it a lot. Shop around. I'm the same way, if I don't like a business they'll never see me again. Maybe you should focus on specific people at each shop. Hopefully multiple visits will build rapport. There are more good folks working at LBSs than bad ones. Find the good ones and support them.
As for bike co-ops, that could be a great source of small parts, but don't get your hopes up. If they have a small part you may need, chances are they need it to get one of their bikes up and running, they're not going to be stocking parts.
"multiple visits will build rapport" - You quoted an awful lot of my posts - did you READ them?
#16
Senior Member
I am all for supporting local bike shops, too, but, like you, I ride an older bike that the shops around here don't "support" anymore. The two shops I used to be able to rely on went out of business in the past 12 months.
That said, I ride a 1995-96 GT Outpost and I have a bunch of spare parts, some of which you can have if you're willing to drive out to Nassau County, Long Island to pick them up. Can you show me a pic of the handlebars you want?
That said, I ride a 1995-96 GT Outpost and I have a bunch of spare parts, some of which you can have if you're willing to drive out to Nassau County, Long Island to pick them up. Can you show me a pic of the handlebars you want?
#17
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am all for supporting local bike shops, too, but, like you, I ride an older bike that the shops around here don't "support" anymore. The two shops I used to be able to rely on went out of business in the past 12 months.
That said, I ride a 1995-96 GT Outpost and I have a bunch of spare parts, some of which you can have if you're willing to drive out to Nassau County, Long Island to pick them up. Can you show me a pic of the handlebars you want?
That said, I ride a 1995-96 GT Outpost and I have a bunch of spare parts, some of which you can have if you're willing to drive out to Nassau County, Long Island to pick them up. Can you show me a pic of the handlebars you want?
#18
Senior Member
I used to run a bicycle recycling program and was going to suggest you hit it with aluminum foil before replacing. If you want, I will look for a bar to match that one tomorrow. I was expecting to see a flat bar like mine, but I know I had at least one of those curved ones at one time.
#19
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used to run a bicycle recycling program and was going to suggest you hit it with aluminum foil before replacing. If you want, I will look for a bar to match that one tomorrow. I was expecting to see a flat bar like mine, but I know I had at least one of those curved ones at one time.
It's also possible she may want something that will sit a little higher for a slightly more upright riding position. If/when you get around to discovering what you have, feel free to PM me instead if you'd rather and I can let you know where this resto journey is taking me.
#20
Senior Member
I am an LBS mechanic but I'm not too stressed about you doing your own work, for what it's worth. Anyhow, If you're doing your own work you really should just buy some decent housing cutters.https://pedros.com/products/tools/br.../cable-cutter/ are quite nice for the price (price io object, either Knipex or Felco). https://www.amazon.com/Muzata-Steel-...98&s=hi&sr=1-4 are cheaper yet and they're OK in my experience. If you own a rotary tool a cutoff wheel will also do a good job (actually, a better job on brake housing.) Buying cables and housing in semi-bulk will also cut your costs down significantly and will encourage you to change them more often, which really does help shift performance a lot.Like https://www.amazon.com/Jagwire-Lex-D.../dp/B01789FVYA, is a pretty sane quantity for an individual to buy (and is pretty good stuff, better than many shop's bulk rolls).
Also generally speaking linear pull brake springs are usually aren't sold as a replacement part these days, though they can certainly be scavenged sometimes. They rarely if ever need replacement in my experience, so the relatively low price of decent linear pulls seems sane in the very few times that brakes need actual replacement parts.
Also generally speaking linear pull brake springs are usually aren't sold as a replacement part these days, though they can certainly be scavenged sometimes. They rarely if ever need replacement in my experience, so the relatively low price of decent linear pulls seems sane in the very few times that brakes need actual replacement parts.
#21
Senior Member
Join Date: Feb 2020
Posts: 1,060
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Likes: 0
Liked 255 Times
in
185 Posts
I am surprised with the people saying pay more to support you local bike shop.
Those bike shops which are not profitable will go out of business. Your support may postpone this by a few months. You will not actually save unprofitable shops. So why waste your money?
There is more to it. Once there is less competition, the big players will put prices up. But there is nothing you and I can do to stop what is happening.
The world is changing. We have to accept a new business model.
Those bike shops which are not profitable will go out of business. Your support may postpone this by a few months. You will not actually save unprofitable shops. So why waste your money?
There is more to it. Once there is less competition, the big players will put prices up. But there is nothing you and I can do to stop what is happening.
The world is changing. We have to accept a new business model.
#22
Junior Member
Thread Starter
Join Date: Aug 2017
Location: CT (USA)
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am an LBS mechanic but I'm not too stressed about you doing your own work, for what it's worth. Anyhow, If you're doing your own work you really should just buy some decent housing cutters.https://pedros.com/products/tools/br.../cable-cutter/ are quite nice for the price (price io object, either Knipex or Felco). https://www.amazon.com/Muzata-Steel-...98&s=hi&sr=1-4 are cheaper yet and they're OK in my experience. If you own a rotary tool a cutoff wheel will also do a good job (actually, a better job on brake housing.) Buying cables and housing in semi-bulk will also cut your costs down significantly and will encourage you to change them more often, which really does help shift performance a lot.Like https://www.amazon.com/Jagwire-Lex-D.../dp/B01789FVYA, is a pretty sane quantity for an individual to buy (and is pretty good stuff, better than many shop's bulk rolls).
Also generally speaking linear pull brake springs are usually aren't sold as a replacement part these days, though they can certainly be scavenged sometimes. They rarely if ever need replacement in my experience, so the relatively low price of decent linear pulls seems sane in the very few times that brakes need actual replacement parts.
Also generally speaking linear pull brake springs are usually aren't sold as a replacement part these days, though they can certainly be scavenged sometimes. They rarely if ever need replacement in my experience, so the relatively low price of decent linear pulls seems sane in the very few times that brakes need actual replacement parts.
The comments about the brake springs are helpful, too. This setup is a little over 20 years old. And they were not left in a "relaxed" state at any point, so I don't know if they're fatigued. Until I get the mechanisms apart to inspect the surfaces where pieces move, I won't know if the slow recovery is weak springs, dirty / non-lubricated surfaces, poor adjustment, bad cables, or some combination of those things.
#23
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,383
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2490 Post(s)
Liked 2,960 Times
in
1,682 Posts
One of the things I learned from materials engineers who have posted on this forum is that springs do not fatigue if left under tension. What fatigues springs is going through cycles of tension and release.
#24
Senior Member
It's going to be a few days before I can even think about touching it, so there's no rush.
It's also possible she may want something that will sit a little higher for a slightly more upright riding position. If/when you get around to discovering what you have, feel free to PM me instead if you'd rather and I can let you know where this resto journey is taking me.
It's also possible she may want something that will sit a little higher for a slightly more upright riding position. If/when you get around to discovering what you have, feel free to PM me instead if you'd rather and I can let you know where this resto journey is taking me.
#25
Banned.
Join Date: Apr 2018
Posts: 821
Bikes: Wahoo of Theseus, others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 428 Post(s)
Liked 67 Times
in
46 Posts
modernbike.com looks pretty good, just ordered some stuff there. Cheap or free shipping. Great to support LBS in theory but they often suck in many ways, can't even get 26 inch inner tubes or tires in most of the ones around here so basically worthless to me. Couldn't even get a spoke tool at one of them last time I went.