Tire pressure lower limit on Tire
#1
Junior Member
Thread Starter
Join Date: Sep 2013
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Tire pressure lower limit on Tire
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
#2
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,056
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22600 Post(s)
Liked 8,928 Times
in
4,160 Posts
#3
Senior Member
Join Date: Dec 2012
Posts: 1,163
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Likes: 0
Liked 20 Times
in
18 Posts
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
#4
Junior Member
I do this all the time never had any flats due to this. I try to go as low as I can without pinch flatting or feeling mushy, comfort first.
#5
Senior Member
Join Date: Apr 2011
Location: Alpharetta, GA
Posts: 15,280
Bikes: Nashbar Road
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 2934 Post(s)
Liked 341 Times
in
228 Posts
You get best results with pressures within the range on the tire's sidewall. That said, I don't worry about pinch flats unless the pressure is somewhat lower than that, and I'd run your 28's at 70-85 if I wanted to. YMMV
#6
Passista
Join Date: Jul 2005
Posts: 7,599
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 868 Post(s)
Liked 721 Times
in
396 Posts
Sounds a bit low to me. However, if you are careful with potholes, railroad tracks, etc. you shouldn't have any problems.
#9
Junior Member
Join Date: Mar 2016
Location: Round Rock
Posts: 145
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 51 Post(s)
Liked 6 Times
in
6 Posts
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
Happy and comfy riding
#10
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
What Reynolds said. Think of the times you've flatted and gotten home on an underinflated tire.
#11
Senior Member
Join Date: Jun 2016
Posts: 174
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 62 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
I've ridden thousands of miles on tires that were "under-inflated" without issue.
#12
Senior Member
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
#14
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,640
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4737 Post(s)
Liked 1,533 Times
in
1,004 Posts
I run a Connondale Synapse with Schwalbe One 28c tires. I weigh 165lbs and the Bike is 18lbs. I ride on average road surfaces. I think the ideal pressure for comfort at the rear is around 75-80 PSI and 70 PSI or so in the front. The lowest PSI on the tires say 85 PSI. Is it Safe to run them at the lower pressure or should I go with 90 PSI at the rear and 85 PSI front to stay within the lower limit with a little less comfort? i am interested to see what other rider do in this situation.
Visiting Schwalbe's site, it is odd but they list the same MIN pressure for all of the One model tires whether it's 700x23, 25, or 28. They only change the max. That's not usually the case with most manufacturers.
https://www.schwalbe.com/en/road-rea...walbe-one.html
#15
Senior Member
Join Date: Feb 2017
Location: Geneva, IL
Posts: 361
Bikes: 2015 Storck Scenero G3 (Force 22)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
To the OP, is that a tubeless tire? If so, I thought one of the main benefits of tubeless was that your could ride them at lower pressures, no?
#16
Senior Member
Is this a Schwalbe thing..? 85psi MIN for 28mm tires seems awfully high. My 25mm Mich Pro Endurance list 73 psi as a minimum for example.
Visiting Schwalbe's site, it is odd but they list the same MIN pressure for all of the One model tires whether it's 700x23, 25, or 28. They only change the max. That's not usually the case with most manufacturers.
https://www.schwalbe.com/en/road-rea...walbe-one.html
Visiting Schwalbe's site, it is odd but they list the same MIN pressure for all of the One model tires whether it's 700x23, 25, or 28. They only change the max. That's not usually the case with most manufacturers.
https://www.schwalbe.com/en/road-rea...walbe-one.html
The most ridiculous I have is Vittoria's Open Pave. 27mm tire and the sidewall lists a 100PSI minimum.
I don't think I'm ever going to run them that high.
#17
Senior Member
Is this a Schwalbe thing..? 85psi MIN for 28mm tires seems awfully high. My 25mm Mich Pro Endurance list 73 psi as a minimum for example.
Visiting Schwalbe's site, it is odd but they list the same MIN pressure for all of the One model tires whether it's 700x23, 25, or 28. They only change the max. That's not usually the case with most manufacturers.
https://www.schwalbe.com/en/road-rea...walbe-one.html
Visiting Schwalbe's site, it is odd but they list the same MIN pressure for all of the One model tires whether it's 700x23, 25, or 28. They only change the max. That's not usually the case with most manufacturers.
https://www.schwalbe.com/en/road-rea...walbe-one.html