"Chain suck" sucks! NEED HELP!
#1
Senior Member
Thread Starter
Join Date: Sep 2013
Location: Northwest Arkansas
Posts: 291
Bikes: 2015 Kona Rove AL, 2016 Giant Escape 2, 1995 Giant attraction SS,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
"Chain suck" sucks! NEED HELP!
The teeth on my middle chainring are kinda worn out and after replacing my chain the other day, I occasionally experience what's known as "chain suck". It really doesn't happen very often, in fact only in rare cases. But when it does, it's a mess.
Later this month, I'm departing on a 700 mile tour and am for the most part going to try to stay out of the middle ring. I don't know if I can budget a new chainring. So in the case that I do use the middle ring, I would like the assurance that I'm not going to damage my frame.
I've heard of some people using zip-ties on the chainstay. But I'm wondering, does the zip-tie method just protect the frame? or does it help prevent chain suck from being a big issue altogether(keeping the chain from getting stuck)?
Any other advice on what I should do?
Later this month, I'm departing on a 700 mile tour and am for the most part going to try to stay out of the middle ring. I don't know if I can budget a new chainring. So in the case that I do use the middle ring, I would like the assurance that I'm not going to damage my frame.
I've heard of some people using zip-ties on the chainstay. But I'm wondering, does the zip-tie method just protect the frame? or does it help prevent chain suck from being a big issue altogether(keeping the chain from getting stuck)?
Any other advice on what I should do?
#3
Banned.
Join Date: Oct 2004
Posts: 1,363
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Your going on a 700 mile tour on a bike that is not in top shape? First check the inside of your chain rin for burrs. it does not take much to get a chain to hang like that. I see it often in mtb.
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,729
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,594 Times
in
1,437 Posts
Chain suck on worn rings is related to the same cause as chain skipping on a worn cassette. There's not much you can do to prevent it, short of using an older worn chain, or a new ring. protecting the chainstay with zip ties, or a metal guard isn't about preventing suck, it's only about protecting the stay from damage.
Steel frames are somewhat resistant to chain suck damage, but aluminum and CF frames can easily be damaged, so do what you need to protect them.
Meanwhile, skip a few beers in the next weeks and spring for a new chainring.
Steel frames are somewhat resistant to chain suck damage, but aluminum and CF frames can easily be damaged, so do what you need to protect them.
Meanwhile, skip a few beers in the next weeks and spring for a new chainring.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Banned
the clever small MTB builders made a piece that bolted under the chainstay and filled in the space the sucked chain into..
so didn't cure it, but made the damage caused to the frame, minimal..
so didn't cure it, but made the damage caused to the frame, minimal..