I fixed my helmet with sew-up glue and a sock
#1
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
I fixed my helmet with sew-up glue and a sock
Partly because throwing it out would be a waste of syrofoam and partly because I am a cheap bastard.
Sometimes going green and being frugal are the same thing.
One of the straps that hold the black plastic piece to the back of your head came loose, so I glued it back on. The sock I put there to clamp it until the glue dried, then trimmed the excess so that part of the sock is stuck there and protects my head from the excess glue.
Sometimes going green and being frugal are the same thing.
One of the straps that hold the black plastic piece to the back of your head came loose, so I glued it back on. The sock I put there to clamp it until the glue dried, then trimmed the excess so that part of the sock is stuck there and protects my head from the excess glue.
Likes For Skipjacks:
#4
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
I'm not sure why you wear a helmet? If it needs that much work, it isn't going to do much to save you. The recommended lifespan of a helmet is 5 years - that is why the manufacture date is put on a helmet. If maintained properly it can last longer, but sounds like you are over due.
A basic helmet doesn't cost much - and you never really know when you will really use one.
A basic helmet doesn't cost much - and you never really know when you will really use one.
#5
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,901
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,928 Times
in
1,210 Posts
I figure the expiration date on a helmet is like the 18 month expiration date on canned food -- a good way for the manufacturer to sell you more. They'd probably make the helmet expire in 2 years if they could sell them to the bike shops -- who wants to buy a helmet that "needs" to be replaced in a year and a half??
@davei1980, what kind of glue did you use on the helmet?
@davei1980, what kind of glue did you use on the helmet?
#6
Senior Member
Join Date: Jun 2016
Location: Boston Roads
Posts: 975
Bikes: 2012 Canondale Synapse 105, 2017 REI Co-Op ADV 3.1
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 507 Post(s)
Liked 237 Times
in
133 Posts
IMHO, from an engineer's point of view, expiration dates on helmets and child car seats are BS. We don't have expiration dates on other plastic things in our cars. From an Occam's razor viewpoint, third parties have a financial interest in incentivizing people to replace their helmets and car seats under the guise of safety.
Maybe, just MAYBE, the foam on helmets can become weaker from UV exposure but there hasn't been scientific evidence for that. In fact, there was a study disproving the claim that helmets become weaker with age.
https://asmedigitalcollection.asme.o...dFrom=fulltext
With all that said, if you have to glue a part of your helmet so it stays on your head, you should probably look into getting a new one. A helmet is supposed to stay on your head during a crash and if a strap is loose such that the helmet can rotate off, that's a bad thing.
Maybe, just MAYBE, the foam on helmets can become weaker from UV exposure but there hasn't been scientific evidence for that. In fact, there was a study disproving the claim that helmets become weaker with age.
https://asmedigitalcollection.asme.o...dFrom=fulltext
With all that said, if you have to glue a part of your helmet so it stays on your head, you should probably look into getting a new one. A helmet is supposed to stay on your head during a crash and if a strap is loose such that the helmet can rotate off, that's a bad thing.
#7
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
I figure the expiration date on a helmet is like the 18 month expiration date on canned food -- a good way for the manufacturer to sell you more. They'd probably make the helmet expire in 2 years if they could sell them to the bike shops -- who wants to buy a helmet that "needs" to be replaced in a year and a half??
@davei1980, what kind of glue did you use on the helmet?
@davei1980, what kind of glue did you use on the helmet?
Likes For nomadmax:
Likes For wphamilton:
#10
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
So far so good. And yes, it must be Less reactive than other Glue, Makes sense because it’s made to go on the underside of tires (Complete guess)
#12
Senior Member
Join Date: Apr 2011
Location: Alpharetta, GA
Posts: 15,280
Bikes: Nashbar Road
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 2934 Post(s)
Liked 341 Times
in
228 Posts
UV degradation is real, but its extent is *far* less than people imagine. Prolonged exposure - that would be leaving the helmet out in the sun every day, with the plastic cover missing - will result in yellowing and a covering of dust from the degraded Styrofoam. The thickness of that layer of dust compared to the thickness of the helmet represents the (trivial) reduction of impact protection. My opinion: there is nothing wrong with repairing a damaged bike helmet.
Likes For wphamilton:
Likes For Moe Zhoost:
#14
Keepin it Wheel
Join Date: Aug 2011
Location: San Diego
Posts: 10,245
Bikes: Surly CrossCheck, Krampus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,427 Times
in
2,534 Posts
That reminds me, I need to buy another $15 helmet, because my last one cracked when I had a really solid hit on a tree-branch a month or so ago:
Just ordered: https://www.ebay.com/itm/Bike-Helmet...X5auGy_UEBGsfA
Just ordered: https://www.ebay.com/itm/Bike-Helmet...X5auGy_UEBGsfA
Likes For RubeRad:
#16
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
The part that came loose was the strap which holds the plastic plate thingy to the back of my head. It came unglued or unvelcroed or whatever. I glued it on with tire glue, knowing I had to clamp it to work and that the glue would get all over, I put a sock over the repaired area before clamping then just trimmed away the excess sock when I was done and left the part that stuck.