Brake/Shifters, DA7800 or Ultegra 6700, Which Is Better?
#1
Bike Junkie
Thread Starter
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
Brake/Shifters, DA7800 or Ultegra 6700, Which Is Better?
It looks like one of the Ultegra 6600 brifters on my bike is failing and can't be repaired. Assuming it's toast, I'm looking at replacing both. I'm considering used DA7800 or Ultegra 6700. The Ultegra has the advantage of being a newer design, but I recall some who complained that the full internal cable routing didn't shift as well as the older design when this was first released. If that's true, I'd rather go with the DA.
The remainder of the drive train is mostly Ultegra, 6600 Rear DR and 6700 Crank, with a DA front DR.
I'm not interested in changing to 11 speed so that's not an option.
Any input regarding the two brake/shifters I'm considering is appreciated.
The remainder of the drive train is mostly Ultegra, 6600 Rear DR and 6700 Crank, with a DA front DR.
I'm not interested in changing to 11 speed so that's not an option.
Any input regarding the two brake/shifters I'm considering is appreciated.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#2
Senior Member
It looks like one of the Ultegra 6600 brifters on my bike is failing and can't be repaired. Assuming it's toast, I'm looking at replacing both. I'm considering used DA7800 or Ultegra 6700. The Ultegra has the advantage of being a newer design, but I recall some who complained that the full internal cable routing didn't shift as well as the older design when this was first released. If that's true, I'd rather go with the DA.
The remainder of the drive train is mostly Ultegra, 6600 Rear DR and 6700 Crank, with a DA front DR.
I'm not interested in changing to 11 speed so that's not an option.
Any input regarding the two brake/shifters I'm considering is appreciated.
The remainder of the drive train is mostly Ultegra, 6600 Rear DR and 6700 Crank, with a DA front DR.
I'm not interested in changing to 11 speed so that's not an option.
Any input regarding the two brake/shifters I'm considering is appreciated.
#4
Senior Member
If you want to stay in 10sp, there's also the option of 4600/4700 Tiagra and 5700 105. Both are pretty good
Last edited by upthywazzoo; 04-21-16 at 08:57 AM. Reason: added model
#5
Senior Member
#6
Senior Member
#7
Senior Member
#10
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
+1.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
#11
Senior Member
+1.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
#12
Senior Member
Personally, I find the 6700 shifters have a far better shape. If you ride primarily on the hoods, I find 6700 has much better braking from the hoods. Complaints about the shifting and broken cables are definitely over-stated. 6700 shifts great. I recently replaced the cables on my 6700 after ~7k mi, the cables showed no fraying at all and I use the shifters like video game buttons.
#13
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,026
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22571 Post(s)
Liked 8,918 Times
in
4,152 Posts
#14
Senior Member
+1.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
Also, 6700/5700 have a tendency to break the shift cables inside the shifter body. I have 5700 and I've had this happen 3 times now, so about once every 7,000 miles or so. It's not too hard to fix, but it's still one additional issue that the older 7800 levers don't have any trouble with.
#15
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
This is an issue common to 7800 shifters as well. They force the cable into a sharp bend at the cable head where eventually it can fray and then separate. https://www.bikeforums.net/bicycle-me...ng-cables.html.
#16
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
7800 is one of the best mechanical groups that has ever been placed on a bicycle.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#17
well hello there
Join Date: May 2005
Location: Point Loma, CA
Posts: 15,430
Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 503 Post(s)
Liked 336 Times
in
206 Posts
Agree with 7800 as being superior.
But last time I bought some 7800 NOS, I paid premium because it's getting harder to find.
But last time I bought some 7800 NOS, I paid premium because it's getting harder to find.
__________________
.
.
Two wheels good. Four wheels bad.
.
.
Two wheels good. Four wheels bad.
#18
Farmer tan
Be sure to get some DA 7800 brake calipers as well. Best brakes I've ever used even with ultegra 6600 levers on my Allez.
That combo feels even better than the ultegra 6800 on my Supersix.
That combo feels even better than the ultegra 6800 on my Supersix.
#19
Senior Member
Join Date: Oct 2012
Location: West Gippy, Australia
Posts: 607
Bikes: 2017 Ridley Noah SL - Candy Apple DA9000, 2011 CAAD10 Berzerker Ult6800, 2013 FOCUS Mares CX Ult6800
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yep, of those options, the DA7800 are nicer shifters and IMO, they feel better ergonomically - I've had both.
cheers
cheers
#20
Bike Junkie
Thread Starter
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
Just wanted to follow up and thank all those who responded. The DA 7800 Shifters just arrived in the mail today. I'm going to buy some new cables, than begin installing them. Should have everything installed within a few days (Need to time it right between rides).
Thanks again.
Thanks again.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#21
Bike Junkie
Thread Starter
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
Thanks, I bought the DA 7800 brakes last year. Installed them with some Koolstop salmon colored pads. You're right, they perform great.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#22
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
I always swore by salmon pads in the past, but SS Flash Pros are even better.