Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Unbelievably tight KMC 10sp quick link!

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Unbelievably tight KMC 10sp quick link!

Old 06-28-19, 05:30 AM
  #1  
migrantwing
Senior Member
Thread Starter
 
migrantwing's Avatar
 
Join Date: Sep 2011
Location: UK
Posts: 495

Bikes: '07 Carrera TDF / 2011 Ghost Race Actinum 5000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 3 Times in 2 Posts
Unbelievably tight KMC 10sp quick link!

Came to give my bike the once over before setting out for a ride on Sunday. Brand new KMC X10.93 chain fitted (now called simply X10, the new black/silver type in the hard plastic case) and quick link that came with the chain in the box. Lubed chain, cleaned off excess, checked brakes, gears etc. All good. Came to wipe off chain once again to see if there was any more excess last night and noticed that I couldn't open the quick link. I tried absolutely everything, no joy. I have always been able to remove KMC quick links using only my fingers, even if they've been a little tough sometimes. I flexed the chain, added more lube to the quick link, tried GT85, tried the wire around the link trick, tried the needle nose pliers trick. Nothing! In the end, I had to cut the quick link through with a hacksaw, this way I able to remove the chain from the bike, and then get some pliers to get the left over pieces off the chain. Maybe I should have just left the quick link on the chain, until it had worn a little bit, but I doubt that I would have been able to release it even then.

I've never known anything like it. Has anyone had any hassle with new chains/quicklinks from KMC? I'm quite reluctant to add another.
migrantwing is offline  
Old 06-28-19, 05:58 AM
  #2  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Buy the tool.

The link is only "unbelievably tight" if the proper tool can't remove it.

I used to mess with needlenose pliers, etc., until I bought the tool two years ago. Wish I had done it two decades ago.

Even with the tool, some links take lots of force.


-Tim-
TimothyH is offline  
Likes For TimothyH:
Old 06-28-19, 06:13 AM
  #3  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,462
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,318 Times in 2,703 Posts
Not to mention why did you want to remove a "brand new" chain?
shelbyfv is offline  
Likes For shelbyfv:
Old 06-28-19, 06:30 AM
  #4  
Litespud
Senior Member
 
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683

Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times in 446 Posts
Was likely a “single use” link - they lock closed and need a tool to remove. As I understand it, the only difference between these and reusable links is the tiny metal nubs that lock the link closed. File these down and, hey presto, you have a reusable link. My past batch of SRAM 10sp chains had single use links. After they had their single use I replaced them with Connexs. This might be the way things are going, as my previous batch of the same chain model all contained reusable links. Why sell you a reusable link when they can force you to continue buying new single-use links?

Last edited by Litespud; 06-28-19 at 06:35 AM.
Litespud is offline  
Likes For Litespud:
Old 06-28-19, 07:26 AM
  #5  
Shimagnolo
Senior Member
 
Shimagnolo's Avatar
 
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,086
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3355 Post(s)
Liked 5,434 Times in 2,812 Posts
KMC has long had 2 types of links: "reusable" (non-latching), and "non-reusable" (latching).
And in my experience, you can find either type in the box with a KMC chain.
Just get the Park MLP-1 and it is trivial to open either kind.
https://www.parktool.com/product/mas...pliers-mlp-1-2
Shimagnolo is online now  
Likes For Shimagnolo:
Old 06-28-19, 07:37 AM
  #6  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 8,553

Bikes: Nekobasu, Pandicorn, Lakitu

Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 4905 Post(s)
Liked 1,731 Times in 958 Posts
Buy the tool. Seriously. Worth every penny.

It doesn't matter what the mfr. writes on the packaging-- no such thing as "single use." I re-use 11-speed links dozens of times each, as the chains come off the bikes 10-12 times during the life of the chain.
__________________
DrIsotope is offline  
Likes For DrIsotope:
Old 06-28-19, 07:50 AM
  #7  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 104 Times in 82 Posts
Originally Posted by migrantwing
... I have always been able to remove KMC quick links using only my fingers...

... I'm quite reluctant to add another.
Odd that you seek out anonymous internet opinions while ignoring the bulk of your own first-hand experience.
AnkleWork is offline  
Old 06-28-19, 09:01 AM
  #8  
Crankycrank
Senior Member
 
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,651
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 835 Post(s)
Liked 1,056 Times in 741 Posts
Another vote for getting the quick link pliers or if out on the road you can use this trick.
Even a rock will do to knock the link loose.
Crankycrank is offline  
Likes For Crankycrank:
Old 06-28-19, 11:01 AM
  #9  
trailangel
Senior Member
 
trailangel's Avatar
 
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,847

Bikes: Schwinn Varsity

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 741 Times in 421 Posts
Why remove if you don't have to? New chains wear fast, so just leave it and add lube. Clean chain on the bike.
I don't hit my chain plate with rocks. Now I carry this lightweight wolf tool.. a bit pricey, but when you do other peoples bikes more than yours it comes in handy.
https://www.universalcycles.com/shop...s.php?id=93762
trailangel is offline  
Old 06-28-19, 11:19 AM
  #10  
sdmc530
Heft On Wheels
 
sdmc530's Avatar
 
Join Date: Nov 2014
Location: South Dakota
Posts: 3,124

Bikes: Specialized,Cannondale,Argon 18

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times in 346 Posts
YEP....the tool is great. I have the tool from Park and one of the best tools I own for home bike maintenance!
sdmc530 is offline  
Likes For sdmc530:
Old 06-28-19, 11:21 AM
  #11  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by trailangel
Why remove if you don't have to? New chains wear fast, so just leave it and add lube. Clean chain on the bike.
I don't hit my chain plate with rocks. Now I carry this lightweight wolf tool.. a bit pricey, but when you do other peoples bikes more than yours it comes in handy.
https://www.universalcycles.com/shop...s.php?id=93762
Some like to rotate several chains to extend the life of cassettes and chainrings.




-Tim-
TimothyH is offline  
Old 06-28-19, 11:58 AM
  #12  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,462
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,318 Times in 2,703 Posts
The Wolf tool looks nice. Valve core removal as well.
shelbyfv is offline  
Old 06-28-19, 03:51 PM
  #13  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times in 723 Posts
Originally Posted by DrIsotope
Buy the tool. Seriously. Worth every penny.

It doesn't matter what the mfr. writes on the packaging-- no such thing as "single use." I re-use 11-speed links dozens of times each, as the chains come off the bikes 10-12 times during the life of the chain.
I consider "single use" to mean "use on a single chain". IIRC the single use thing is a patent workaround.
dsbrantjr is offline  
Likes For dsbrantjr:
Old 06-28-19, 05:08 PM
  #14  
migrantwing
Senior Member
Thread Starter
 
migrantwing's Avatar
 
Join Date: Sep 2011
Location: UK
Posts: 495

Bikes: '07 Carrera TDF / 2011 Ghost Race Actinum 5000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 3 Times in 2 Posts
Originally Posted by shelbyfv
Not to mention why did you want to remove a "brand new" chain?
Because I wanted to.
migrantwing is offline  
Likes For migrantwing:
Old 06-28-19, 05:12 PM
  #15  
migrantwing
Senior Member
Thread Starter
 
migrantwing's Avatar
 
Join Date: Sep 2011
Location: UK
Posts: 495

Bikes: '07 Carrera TDF / 2011 Ghost Race Actinum 5000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 3 Times in 2 Posts
Originally Posted by Crankycrank
Another vote for getting the quick link pliers or if out on the road you can use this trick. https://www.youtube.com/watch?v=85Uednr4zFI Even a rock will do to knock the link loose.
Cool trick. Seen it done once on the road.
migrantwing is offline  
Old 06-28-19, 05:14 PM
  #16  
migrantwing
Senior Member
Thread Starter
 
migrantwing's Avatar
 
Join Date: Sep 2011
Location: UK
Posts: 495

Bikes: '07 Carrera TDF / 2011 Ghost Race Actinum 5000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 3 Times in 2 Posts
Originally Posted by TimothyH
Buy the tool.

The link is only "unbelievably tight" if the proper tool can't remove it.

I used to mess with needlenose pliers, etc., until I bought the tool two years ago. Wish I had done it two decades ago.

Even with the tool, some links take lots of force.


-Tim-
Yep. I've put off buying the tool for far too long.
migrantwing is offline  
Likes For migrantwing:
Old 06-28-19, 06:17 PM
  #17  
August West
Senior Member
 
Join Date: Jun 2009
Location: Land of Enchantment
Posts: 468

Bikes: Domane SLR7 Project One

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 152 Post(s)
Liked 173 Times in 105 Posts
On my old 8 & 9 spd. bikes I was always able to remove the quick links by hand too. But, with 10 & 11 spd. drivetrains things changed as the links are now very tight. Like everybody says, by the tool. It will save you a lot of grief. Luckily, they aren't very expensive.

Park Master Link Pliers
August West is offline  
Old 06-28-19, 07:27 PM
  #18  
gearbasher
Senior Member
 
gearbasher's Avatar
 
Join Date: May 2009
Location: Sitting on my butt in front of a computer
Posts: 1,535
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 440 Post(s)
Liked 835 Times in 363 Posts
I once had a KMC link that wouldn't close. I tried everything. Got so peed-off, I emailed KMC. They asked me to send them the link. I did and they sent a new one back to me.
gearbasher is offline  
Old 06-29-19, 03:33 AM
  #19  
Racing Dan
Senior Member
 
Racing Dan's Avatar
 
Join Date: Aug 2015
Posts: 2,224
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1332 Post(s)
Liked 316 Times in 214 Posts
Most quick links are single use, just like the Shimano joining pin. If you want to remove the chain with your hands get a whipperman chain link or get chain link pliers as suggested by others.
Racing Dan is offline  
Likes For Racing Dan:
Old 06-29-19, 09:41 AM
  #20  
sdmc530
Heft On Wheels
 
sdmc530's Avatar
 
Join Date: Nov 2014
Location: South Dakota
Posts: 3,124

Bikes: Specialized,Cannondale,Argon 18

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times in 346 Posts
Originally Posted by dsbrantjr
I consider "single use" to mean "use on a single chain". IIRC the single use thing is a patent workaround.
Same here. I use one set of quick links on the same chain. when chain wears out I throw out the quick links too. I remove my chain numerous times during its life using the same quick links and have never had an issue with KMC or Shimano.
sdmc530 is offline  
Old 06-29-19, 02:02 PM
  #21  
BCDrums
Recreational Road Cyclist
 
BCDrums's Avatar
 
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 546

Bikes: 1990 Peter Mooney road bike

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 254 Post(s)
Liked 252 Times in 134 Posts
Originally Posted by gearbasher
I once had a KMC link that wouldn't close. I tried everything. Got so peed-off, I emailed KMC. They asked me to send them the link. I did and they sent a new one back to me.
On the very first KMC chain I tried, I got a bum Missing Link that wouldn't close, because one of the pins wasn't perpendicular to the side plate:

I had no other links around and had to scramble for one. I emailed KMC and asked for a new chain for my hassle, They wanted me to fill out a form and send in the chain. I did not.

In both your case and mine, KMC could have made lifelong friends by saying "Jeez, we're sorry, that shouldn't have happened! We're sending you a new whatever for your trouble. So sorry!"

But no, you have to return the link, so KMC can be sure you're not scamming them to get a free $5 item that costs them pennies to manufacture. What a great company (not).

To the OP, I agree with other posters who recommend a tool for the job, but I too did it for many years without one and could always get the link off. Maybe you too got a bum link from KMC.
BCDrums is offline  
Likes For BCDrums:
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rseeker
General Cycling Discussion
20
10-11-19 11:32 PM
bazap
Bicycle Mechanics
9
05-30-18 10:50 AM
pstock
Bicycle Mechanics
9
07-03-17 07:30 AM
arex
Bicycle Mechanics
18
01-19-16 10:41 AM
chandltp
Bicycle Mechanics
6
05-25-15 10:00 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.