Go Back  Bike Forums > Bike Forums > Beach Cruisers
Reload this Page >

Electra C1 , new wheels !

Notices
Beach Cruisers Do you love balloon tires and fenders? Do you love riding the simplicity of a single gear and coaster brakes or a single gear cluster? Do you love the classic curves in the tubing of a cruiser that takes you back to the 1950's and 1960's, stylistically? Here's your home! Welcome to the Beach Cruisers and Cruisers forum!

Electra C1 , new wheels !

Old 10-11-19, 10:40 AM
  #1  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Electra C1 , new wheels !


Got my custom wheels a couple of days ago. Finally got them installed this morning.
the gear is two small , I’ve ordered a 22 tooth to go on it . The one that came on it was faster , but made my knees hurt climbing hills .

Last edited by OldCruiser; 10-11-19 at 10:47 AM.
OldCruiser is offline  
Likes For OldCruiser:
Old 10-11-19, 03:01 PM
  #2  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts

The other side .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-11-19, 10:51 PM
  #3  
JehD
Full Member
 
JehD's Avatar
 
Join Date: Jan 2015
Location: New Mexico
Posts: 342

Bikes: 1981 Bertin C34 - 2020 Electra Cruiser 7D - 2021 Mongoose Dolomite ALX

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 131 Times in 86 Posts
Looks nice. How do the brakes work on the painted rims?
JehD is offline  
Old 10-12-19, 04:43 AM
  #4  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Originally Posted by JehD
Looks nice. How do the brakes work on the painted rims?
The rims are anodized. The brake works better than on the old rim .
OldCruiser is offline  
Old 10-12-19, 06:42 AM
  #5  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
That red goes nicely with the black.
FiftySix is offline  
Old 10-18-19, 11:45 AM
  #6  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Bicycle Wheel Warehouse sent me a coupon code I couldn’t resist, so I ordered another set of custom wheels .
This set in silver will have a Sturmey Archer two speed kickback hub and will probably go on my a Matte Bark C1 .
I hope I like the two speed hub . I read some good reviews on them .
I did want to fool with a three speed with cables and shifter .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-18-19, 02:50 PM
  #7  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
Originally Posted by kirby999
Bicycle Wheel Warehouse sent me a coupon code I couldn’t resist, so I ordered another set of custom wheels .
This set in silver will have a Sturmey Archer two speed kickback hub and will probably go on my a Matte Bark C1 .
I hope I like the two speed hub . I read some good reviews on them .
I did want to fool with a three speed with cables and shifter .
I want to hear feedback on that two speed. Is it with or without coaster brake?

I have a brand spanking new SRAM Automatix 2-speed I bought a couple months ago that someday I'll be lacing into a wheel for my Schwinn single speed.

If I can just get all these other chores behind me, I'll be going down the path of learning to build a wheel.
FiftySix is offline  
Old 10-18-19, 03:09 PM
  #8  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Originally Posted by FiftySix
I want to hear feedback on that two speed. Is it with or without coaster brake?

I have a brand spanking new SRAM Automatix 2-speed I bought a couple months ago that someday I'll be lacing into a wheel for my Schwinn single speed.

If I can just get all these other chores behind me, I'll be going down the path of learning to build a wheel.
It has a coaster brake . For what I paid for the wheelset , and what they’re asking for the hub on Amazon , it’s like I’m getting the wheels for around $25 .
I’m hoping the low gear is lower than the single speed that came on my Electra 1 . I want to be able to spin out around 5-7mph in low . That’ll help me on the hills around here that have been messing up my knees lately.
I’ll be watching for a review of that Automatix 2-speed .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-18-19, 03:21 PM
  #9  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
Originally Posted by kirby999
It has a coaster brake . For what I paid for the wheelset , and what they’re asking for the hub on Amazon , it’s like I’m getting the wheels for around $25 .
I’m hoping the low gear is lower than the single speed that came on my Electra 1 . I want to be able to spin out around 5-7mph in low . That’ll help me on the hills around here that have been messing up my knees lately.
I’ll be watching for a review of that Automatix 2-speed .
It might be a while, but I need to get it done.

I do like riding my red Schwinn as a single speed, but there are so many stop signs around here. I always have to stand on the pedals to get moving quickly if traffic is near.

Right now, the Schwinn is set for 66 gear inches. The Automatix hub (with a 21 tooth rear sprocket) ought to get me 50 gear inches in low and 68 gear inches in high. Should be a very useful stop sign hub.
FiftySix is offline  
Likes For FiftySix:
Old 10-18-19, 03:44 PM
  #10  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
This is what the Sturmey Archer Kickback gear ratios are
Gear Ratio
• Overall Range - 138%
• Gear 1 - 100% (Direct Drive)
• Gear 2 - 138% (Gear 1 + 38%)
I’ve read it comes with a 22 tooth cog . My Electra has a 44 tooth chain ring and the rear cog is 22 tooth now . So it looks like no change in low gear , but an increase in speed in second if my understanding is correct .
Might consider changing the chainring out for a 38 or a 40 tooth .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-18-19, 03:49 PM
  #11  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
Originally Posted by kirby999
This is what the Sturmey Archer Kickback gear ratios are
Gear Ratio
• Overall Range - 138%
• Gear 1 - 100% (Direct Drive)
• Gear 2 - 138% (Gear 1 + 38%)
I’ve read it comes with a 22 tooth cog . My Electra has a 44 tooth chain ring and the rear cog is 22 tooth now . So it looks like no change in low gear , but an increase in speed in second if my understanding is correct .
Might consider changing the chainring out for a 38 or a 40 tooth .
Similar to the Sram Automatix. 1.00 low and 1.36 high.

My Sram did not come with a coaster brake, looks like they quit making that version a while back. Kind of annoying as I'll lose a rear brake unless I buy a caliper, cable, and lever. Turning an inexpensive bike into something more expensive is something I'm prone to do.
FiftySix is offline  
Old 10-18-19, 04:00 PM
  #12  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Originally Posted by FiftySix
Similar to the Sram Automatix. 1.00 low and 1.36 high.

My Sram did not come with a coaster brake, looks like they quit making that version a while back. Kind of annoying as I'll lose a rear brake unless I buy a caliper, cable, and lever. Turning an inexpensive bike into something more expensive is something I'm prone to do.
I’ve added a front caliper brake to my cruisers and use it mostly . I only use both brakes in an emergency stop . Extends the life of a coaster brake , especially with my weight .
Putting money into something you enjoy is money well spent IMO .

I have a Fuji MTB frame that’s a little on the tall side for me , but I can ride it with the saddle resting on the frame ; that will probably get built into a cruiser , using leftover wheelsets .
I also have an old Schwinn MTB frame waiting to be built .
OldCruiser is offline  
Old 10-18-19, 04:16 PM
  #13  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
Originally Posted by kirby999
I’ve added a front caliper brake to my cruisers and use it mostly . I only use both brakes in an emergency stop . Extends the life of a coaster brake , especially with my weight .
For whatever reason, I either grab the front brake or hit the coaster brake, but hardly use both at the same time. I do like the idea of using the coaster brake while riding no handed so that I can wave to the throngs of my adoring fans.


Originally Posted by kirby999
Putting money into something you enjoy is money well spent IMO .
Usually true for me, until my wife calls me on it.
FiftySix is offline  
Old 10-18-19, 04:27 PM
  #14  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Originally Posted by fiftysix
for whatever reason, i either grab the front brake or hit the coaster brake, but hardly use both at the same time. I do like the idea of using the coaster brake while riding no handed so that i can wave to the throngs of my adoring fans.




Usually true for me, until my wife calls me on it. :d
lol
OldCruiser is offline  
Old 10-22-19, 04:05 PM
  #15  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
Originally Posted by FiftySix
I want to hear feedback on that two speed. Is it with or without coaster brake?

I have a brand spanking new SRAM Automatix 2-speed I bought a couple months ago that someday I'll be lacing into a wheel for my Schwinn single speed.

If I can just get all these other chores behind me, I'll be going down the path of learning to build a wheel.
You’ve probably read my post in “which frame “ and now know my hubs weren’t what I expected. I’ll still let you know my opinion as I learn to shift the K T two s hubs .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-23-19, 03:20 PM
  #16  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts


Update on my new wheels and my Electra C1’s .
Technically, my black one would have to be a C2 . Because it now has a two speed kickback hub and new Black anodized aluminum rims .
I’ve had some ideas in my head , wanting to do some changes to both my Electra Cruiser and decided now would be a good time to do them .
I set them up like I setup a MTB for cruising. Small riser handlebars ,MTB saddles . And I shifted my saddles forward , putting my body closer to being over the pedals , hoping this would help eliminate the knee pain I’ve been getting when I ride a pedal forward bike and switch back and forth between my cruisers and mtb’s . I rode seven miles total between the cruisers today and the knees do feel better .
I like the new Cruiser/MTB look too .
The black one got the black rims and 2 speed hub , the matte bark one got the red rims with the Shimano SS coaster brake and I changed out the cog for a 22 tooth , which makes it awesome riding again . The 18 tooth was a little too rough on hills .
I also went back to Kenda 1.9 street tires that are so much lighter than the Maxxis Hookworms and they coast unbelievable .
OldCruiser is offline  
Likes For OldCruiser:
Old 10-25-19, 02:58 PM
  #17  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
I got my new chainrings today a 38 and a 40 tooth chrome.
Thinking putting the 40 tooth on the black C1 with the two speed hub , and the 38 on the Matte Bark with the SS hub .
OldCruiser is offline  
Old 10-27-19, 03:23 PM
  #18  
OldCruiser
Senior Member
Thread Starter
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,677

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 3,044 Times in 1,012 Posts
The last few days I’ve had a chance to ride my C1’s after their wheel and tire changes .
For some reason they feel small to me after riding my Roll and Rockhopper . I think the 1.9 Kenda tires have a lot to do with it too . I miss my Hookworms.
one day this week I’ll be putting them back on .
I also have some new chainrings to install . I think the 38 tooth will be going on the single speed . Depending on how it peddles , I’ll either put the 40 on the two speed or ordered another 38 or something ? I’m looking for something that will spin out around 8-9mph .
the single speed , with its 44 chainring and 22 tooth cog spins out around 12-13mph . I want a hill climber , I’ll speed on the downhill side .
OldCruiser is offline  
Old 10-27-19, 05:36 PM
  #19  
CodyDog
Full Member
 
Join Date: Feb 2019
Location: Texas Hill Country/Salida,Co
Posts: 231

Bikes: Specialized Vado SL/Trek Fuel EXe

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Liked 38 Times in 29 Posts
Sweet!
CodyDog is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.