Help fitting to a bike that's too big.
#1
Newbie
Thread Starter
Help fitting to a bike that's too big.
I'm convinced that my bike is too big of a frame, and didn't realize this since I got it used when I was brand new to road cycling. I've always feel like I have too much of my upper body weight resting forward.
- Well, over time I've moved the seat all the way forward, which seemed to help some. I still slide forward some while riding, and have to move my butt back on the saddle again and again over time (I can't stay put in the saddle. And if I tilt the seat upward to keep from sliding forward, it's uncomfortable)
- My inseam is 31-5/8", and I'm 5'8.5" tall.
- The bike has a 23.5" frame, which is tall. I have no standover clearance to speak of (especially with shoes off). My bars are adjusted all the way up (all the shim spacers are under the bars).
#2
~>~
Sell the bike, and buy one that fits.
Trying to "fix" a bike that's the wrong size is a waste of time, $$$ and effort .
-Bandera
Trying to "fix" a bike that's the wrong size is a waste of time, $$$ and effort .
-Bandera
Likes For Bandera:
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,984
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6192 Post(s)
Liked 4,807 Times
in
3,316 Posts
Road bike? You actually can wind up with too much weight on your arms by sitting upright in the more relaxed position that some want to use for riding a road bike (I was one of those too at one time). Actually getting lower can let the stretching of your lower back muscles and other parts along with the compressing of your gut and abdomen reduce the force going into your arms.
However it does seem that your bike might be way to big. 23.5 inch seat tube length is 59 to 60 cm which is what I ride with a 34.5 inch inseam and 5'-11" tall. Lowering the bars might actually help some if you absolutely have to stay with that bike.
However it does seem that your bike might be way to big. 23.5 inch seat tube length is 59 to 60 cm which is what I ride with a 34.5 inch inseam and 5'-11" tall. Lowering the bars might actually help some if you absolutely have to stay with that bike.
#4
Lucille
Sell the bike and get one that fits you perfectly, now that you know what to look for. There are tons of bikes available, don't settle for one that doesn't fit right.
#5
Space Ghost
Join Date: Oct 2017
Location: NYC
Posts: 1,762
Bikes: Bridgestone, Fuji, Iro, Jamis, Gary Fisher, GT, Scott, Specialized and more
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 292 Post(s)
Liked 412 Times
in
318 Posts
All sound advice. And it’ll be a lotta fun testing more appropriately sized bikes.
#6
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,987
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1092 Post(s)
Liked 936 Times
in
601 Posts
You can't really "fix" a bigger bike. I'd rather it be a smaller size than too big. Sorry to tell you but you have to get rid of that and get a better fitting bike.
#7
Senior Member
Having owned a bike that was too big and a bike that was too small, I think both diminish the joy of riding. I actually found riding the too big bike better than riding the too small one, because I prefer stretching out to being cramped - but I cringed too much at the thought of coming down on the bar the wrong way.
Get a bike that fits.
A couple of thoughts:
1) Although it may not make sense intuitively, try out moving the saddle back to stop sliding forward.
2) Too much weight on your hands can very easily come from bad technique and/or a weak core. (No need to ask how I found that out....)
Get a bike that fits.
A couple of thoughts:
1) Although it may not make sense intuitively, try out moving the saddle back to stop sliding forward.
2) Too much weight on your hands can very easily come from bad technique and/or a weak core. (No need to ask how I found that out....)
Last edited by philbob57; 07-27-19 at 11:36 AM.