Need Tire Help
#1
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Need Tire Help
Hey all, new here.
So I'm out of work with everything going on in the world right now. My wife purchased me a bicycle about 7 years ago but I've never used it. Figured I could use this freetime to do something beneficial for my health.
It was stored on a covered porch for about a year period 6 years ago but has been in a garage otherwise. I gave it a good cleaning and greasing yesterday but I'm concerned that the tires may be bad. The tube maybe?
Bicycle: Next PX6.0 Xelit Shimano. It wasn't expensive and came from Walmart.
Tires: sidewall reads 53-559 (26 x 1.95) and Inflate to 350 KPa (50 PSI) Max Load 90 Kg (198 lbs).
Me: I'm 5'11 and 260#s.
My concerns are how can I determine if the tires/tube are bad? Are these tires even safe to use given my weight? If not what do I need to get?
So I'm out of work with everything going on in the world right now. My wife purchased me a bicycle about 7 years ago but I've never used it. Figured I could use this freetime to do something beneficial for my health.
It was stored on a covered porch for about a year period 6 years ago but has been in a garage otherwise. I gave it a good cleaning and greasing yesterday but I'm concerned that the tires may be bad. The tube maybe?
Bicycle: Next PX6.0 Xelit Shimano. It wasn't expensive and came from Walmart.
Tires: sidewall reads 53-559 (26 x 1.95) and Inflate to 350 KPa (50 PSI) Max Load 90 Kg (198 lbs).
Me: I'm 5'11 and 260#s.
My concerns are how can I determine if the tires/tube are bad? Are these tires even safe to use given my weight? If not what do I need to get?
#3
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Hey all, new here.
So I'm out of work with everything going on in the world right now. My wife purchased me a bicycle about 7 years ago but I've never used it. Figured I could use this freetime to do something beneficial for my health.
It was stored on a covered porch for about a year period 6 years ago but has been in a garage otherwise. I gave it a good cleaning and greasing yesterday but I'm concerned that the tires may be bad. The tube maybe?
Bicycle: Next PX6.0 Xelit Shimano. It wasn't expensive and came from Walmart.
Tires: sidewall reads 53-559 (26 x 1.95) and Inflate to 350 KPa (50 PSI) Max Load 90 Kg (198 lbs).
Me: I'm 5'11 and 260#s.
My concerns are how can I determine if the tires/tube are bad? Are these tires even safe to use given my weight? If not what do I need to get?
So I'm out of work with everything going on in the world right now. My wife purchased me a bicycle about 7 years ago but I've never used it. Figured I could use this freetime to do something beneficial for my health.
It was stored on a covered porch for about a year period 6 years ago but has been in a garage otherwise. I gave it a good cleaning and greasing yesterday but I'm concerned that the tires may be bad. The tube maybe?
Bicycle: Next PX6.0 Xelit Shimano. It wasn't expensive and came from Walmart.
Tires: sidewall reads 53-559 (26 x 1.95) and Inflate to 350 KPa (50 PSI) Max Load 90 Kg (198 lbs).
Me: I'm 5'11 and 260#s.
My concerns are how can I determine if the tires/tube are bad? Are these tires even safe to use given my weight? If not what do I need to get?
Hopefully the hubs, headset, and bottom bracket still have grease. Oil your chain and wipe off the excess.
Welcome to the forums!
Last edited by Unca_Sam; 04-08-20 at 09:48 AM.
#4
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
The max pressure on the sidewall is pounds per square inch.
Your tires are almost 2 inches wide, and can deform enough to support your weight. If you're on the bike and the tires are obviously bulging at the ground, you'll want to add more air (this is more important for pavement riding). You want a little cushion, but too much makes ther bike feel slow with vague steering.
Your tires are almost 2 inches wide, and can deform enough to support your weight. If you're on the bike and the tires are obviously bulging at the ground, you'll want to add more air (this is more important for pavement riding). You want a little cushion, but too much makes ther bike feel slow with vague steering.
#5
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The tires themselves look fine visually. I gave the chain a good greasing yesterday.
All I've got at my disposal is a small hand pump and it feels like the tires aren't taking on air anymore but only reading out at 15 psi on a tire gauge.
All I've got at my disposal is a small hand pump and it feels like the tires aren't taking on air anymore but only reading out at 15 psi on a tire gauge.
Last edited by nuclear90; 04-08-20 at 09:54 AM.
#6
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Floor pump
Frame type pump
Frame pumps don't move as much air as floor pumps. Larger tires also take more air. If you're confident that you have a leak, you'll need a patch or a new tube.
#7
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Calvin Jones shows you how to fix a flat.
#9
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Regardless, try and find the hole in the tube, and check the corresponding location in the rim and tire for the cause of the hole. Putting on a new tube on will result in a new hole if you don't correct the cause.
#10
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Remembered I have a small air compressor in my truck toolbox that plugs into the cigarette lighter spot. Got the tires pumped all the way to 50 PSI. Will let it sit and recheck them over a few days to make sure they are holding air right.
So by inflating the tires had to adjust the brakes as they were too tight against the rim.
Anything else I need to be checking or adjusting that I may not realize? I gave it a once over on the major connection points to ensure they were tight.
I sprayed the chain well with silicone lubricant spray. Is that okay to use?
So by inflating the tires had to adjust the brakes as they were too tight against the rim.
Anything else I need to be checking or adjusting that I may not realize? I gave it a once over on the major connection points to ensure they were tight.
I sprayed the chain well with silicone lubricant spray. Is that okay to use?
#11
Senior Member
If the tires hold air for your ride, they're good. Be aware that it's normal for bike tires to lose air over the course of days or weeks, so topping them off before a ride should be a normal task.
If it came from WallyWorld, then brand is pretty much irrelevant. They're all about the same quality level (low.) If you can keep it adjusted, it'll server you for light use - bearing in mind that "light" means something entirely different to a newcomer than it does to enthusiasts like most of us here are.
If it came from WallyWorld, then brand is pretty much irrelevant. They're all about the same quality level (low.) If you can keep it adjusted, it'll server you for light use - bearing in mind that "light" means something entirely different to a newcomer than it does to enthusiasts like most of us here are.
#12
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Remembered I have a small air compressor in my truck toolbox that plugs into the cigarette lighter spot. Got the tires pumped all the way to 50 PSI. Will let it sit and recheck them over a few days to make sure they are holding air right.
So by inflating the tires had to adjust the brakes as they were too tight against the rim.
Anything else I need to be checking or adjusting that I may not realize? I gave it a once over on the major connection points to ensure they were tight.
I sprayed the chain well with silicone lubricant spray. Is that okay to use?
So by inflating the tires had to adjust the brakes as they were too tight against the rim.
Anything else I need to be checking or adjusting that I may not realize? I gave it a once over on the major connection points to ensure they were tight.
I sprayed the chain well with silicone lubricant spray. Is that okay to use?
I'm not sure how inflating the tires changed the shape of your rims enough that you needed to adjust the brakes. If your brake pads were within 1-2 mm of the rim wall, and you have single wall rims, I guess inflating the tires to a PSI below your recommended PSI could make the rims push out. Pictures will work much better to show what you adjusted, since brakes are a critical system (unless you don't plan on stopping).
#13
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yeah I don't anticipate doing any long rides or anything. Haven't been on a bike in a good 15 years.
Just figured since I've got some time now and it's just hanging up on the wall....might as well give it a go. Something to get in some exercise and fresh air. Can only do so much yard work.
Just figured since I've got some time now and it's just hanging up on the wall....might as well give it a go. Something to get in some exercise and fresh air. Can only do so much yard work.
Likes For nuclear90:
#14
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I had adjusted the brake lines yesterday to make them more sensitive just out of personal preference. They had to be let out just slightly.
Brake pads look clean.
Brake pads look clean.
#15
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
the pads are only half the brake, your rim is the rotor. Your brake pads are probably fine, it's the possible overspray on the rim that's the problem.
#16
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
Just keep getting out there every chance you get and before you know it you'll be doing 20+ miles a day. Good luck to you.
Likes For Bigbus:
#17
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,921
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1815 Post(s)
Liked 1,693 Times
in
974 Posts
That is very much a personal preference. I prefer that my brakes engage about 1/3 of the way into the full lever travel. I find that I can modulate the brakes much better that way
#19
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,955
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 879 Times
in
526 Posts
Nothing to add to the above advice, but I wanted to welcome you to BikeForums. Let us know how your rides go.
#20
Pennylane Splitter
Join Date: Sep 2012
Location: Orange County, California
Posts: 1,878
Bikes: Yes
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1784 Post(s)
Liked 1,437 Times
in
987 Posts
Chain lube: If you have a bottle of motor oil/gear oil in your garage you can use that instead of going out in these coronavirus times for bicycle-specific oil. I started using it years ago, have been using motor oil as a chain lube ever since that time and haven't had any problems. Its varied from 5/20W to 90W gear oil. YMMV
#21
Senior Member
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,297
Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 365 Post(s)
Liked 457 Times
in
240 Posts
Chain lube: If you have a bottle of motor oil/gear oil in your garage you can use that instead of going out in these coronavirus times for bicycle-specific oil. I started using it years ago, have been using motor oil as a chain lube ever since that time and haven't had any problems. Its varied from 5/20W to 90W gear oil. YMMV
__________________
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
#22
Senior Member
Join Date: Feb 2006
Location: Sin City, Nevada
Posts: 2,884
Bikes: Catrike 700, Greenspeed GTO trike, , Linear LWB recumbent, Haluzak Horizon SWB recumbent, Balance 450 MTB, Cannondale SM800 Beast of the East
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 227 Times
in
179 Posts
The advantage of using a bicycle-specific chain lubricant similar to the Cross Country Finish Line brand wet lubricant I use is that it has an added solvent that allows the lubricant to penetrate deep into the chain before the solvent evaporates. I looked at the 4 ounce bottle I have and it sold for $6. Pretty expensive but that bottle is a couple of years old and still has some in it. You could duplicate the penetrating part if you added paint thinner to 10W motor oil and used it. You don't need or want a lot of oil on the outside of the chain where it will pick up dirt. The suggestion to wiping off the chain is a good one.
Brake rubber like the rubber in the tires hardens with age. It makes the brakes much less effective than when the pads were new. It's the one thing I always replace when I refurbish a bike that has rim brakes.
Brake rubber like the rubber in the tires hardens with age. It makes the brakes much less effective than when the pads were new. It's the one thing I always replace when I refurbish a bike that has rim brakes.