To Clean or Not to Clean, that is the question
#1
Full Member
Thread Starter
Join Date: Sep 2005
Location: Tulsa, OK
Posts: 451
Bikes: Co-Motion Americano Pinion P18; Co-Motion Americano Rohloff; Thorn Nomad MkII, Robert Beckman Skakkit (FOR SALE), Santana Tandem, ICE Adventure FS
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 64 Times
in
48 Posts
To Clean or Not to Clean, that is the question
Hi,
I have a box of old Campy parts from the 70s I have decided to sell. Most need a good cleaning as they were taken off a bike and then just stored for 30-40 years, road grime and all. The parts are in good working condition but just need a good cleaning.
My question is should I clean them? Do the vintage purchasers prefer to clean the parts themselves so it is done "right"?. I would probably just clean with the green liquid cleaning stuff and an old toothbrush but I figure some prefer a different method.
Tailwinds, John
I have a box of old Campy parts from the 70s I have decided to sell. Most need a good cleaning as they were taken off a bike and then just stored for 30-40 years, road grime and all. The parts are in good working condition but just need a good cleaning.
My question is should I clean them? Do the vintage purchasers prefer to clean the parts themselves so it is done "right"?. I would probably just clean with the green liquid cleaning stuff and an old toothbrush but I figure some prefer a different method.
Tailwinds, John
#3
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
If you keep it to a superficial clean, then I think it’s very unlikely you’ll negatively affect the value. Serious tinkerers will want to take it apart anyway for a deep clean, and the superficial clean helps assess condition in photos. If you start disassembling, then that’s where things can go wrong, so I would avoid.
#4
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,436 Times
in
818 Posts
I do not know how true this is. I have heard and read that dish detergent is not a good option for bikes or cars. It has acid in it that can affect the finish of the metal. I know it is really good on greasy, oily things and that is what bird/waterfowl rescuers use on animals that have been coated in petroleum products. I do sometimes use simple green as the solution to clean park parts. I also have a cleaner called LA's Totally Awesome Cleaner. It works really well as a solution to soak things in overnight, no acid. As for the detergent, that is the individuals choice.
#5
Classic, Vintage Mechanic
Join Date: Feb 2017
Location: Vancouver B.C. Canada
Posts: 117
Bikes: '65 Legnano Gran Primeo || '76 Holdsworth Mistral || '82 Specialized Stumpjumper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 40 Times
in
25 Posts
Clean components are more appealing and better show the true cosmetic condition, which is important to the kind of people interested in old collectable components.
#6
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
I typically use light oil as a solvent for simple cleaning, like derailleur jockey wheels, either with a toothbrush or a paper towel. It breaks up gritty and dried grease. Something like this:
#7
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,525
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
To maximize return, or to leave a lot of money on the table, that is the answer!
Look up any of your parts on eBay in the sold section. Then sort them highest price first. Once you get past NOS, are the highest prices for dirty stuff or clean?
WD40, a tooth blush and a rag. Personally, I dismantle all cranksets and clean them. Be careful not to lose small parts.
As a practical matter, really dirty can hide defects, so clean for the win.
Sold an RD on eBay yesterday. Did a “one song” cleanup first (total cleanup took less than the time it took to play one song on my workshop stereo). My price was double what someone else was asking for the same dérailleur but dirty. Mine sold, his is still available.
Pay rate for that 4 minute job? Several hundred dollars per hour.
Polishing a seatpost takes longer but a 30 minute job might yield me $50 more for the part.
Lazy sellers get less, a lot less. And their stuff can take longer to sell.
Look up any of your parts on eBay in the sold section. Then sort them highest price first. Once you get past NOS, are the highest prices for dirty stuff or clean?
WD40, a tooth blush and a rag. Personally, I dismantle all cranksets and clean them. Be careful not to lose small parts.
As a practical matter, really dirty can hide defects, so clean for the win.
Sold an RD on eBay yesterday. Did a “one song” cleanup first (total cleanup took less than the time it took to play one song on my workshop stereo). My price was double what someone else was asking for the same dérailleur but dirty. Mine sold, his is still available.
Pay rate for that 4 minute job? Several hundred dollars per hour.
Polishing a seatpost takes longer but a 30 minute job might yield me $50 more for the part.
Lazy sellers get less, a lot less. And their stuff can take longer to sell.
Last edited by wrk101; 03-29-19 at 01:52 PM.
#9
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,098 Times
in
914 Posts
Definitely clean it and use WD40. That’s the simplest way to go and will give a good result.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#10
Cycling addiction
#11
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,519
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,767 Times
in
635 Posts
I would clean and go with WD-40 not too harsh and gives a nice shine for photo's. Check ebay sold listings for your stuff which will give a good idea of the difference between clean well presented BIT now and as is dirty auction prices. As said the clean stuff does a lot better.
#12
Senior Member
It's Italian. Soak it in diesel fuel. That's a magnifico!
#13
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
I say clean and check over. That allows for best visual presentation and also allows the seller to indicate mechanical condition. For example, I will never ever buy a set of hubs on-line unless I am sure that the rolling elements (cups, cones and ball bearings) are good.
So, for me, it is clean (sometimes polish if selling with pictures of on-line) and offer accurate information pertaining to mechanical condition. Now...
If selling on-line, which Campy Legnano hub set would you buy..?
Dirty and "as found"....
or all shined (machiine or hand polished) up and guaranteed mechanical sound..?
So, for me, it is clean (sometimes polish if selling with pictures of on-line) and offer accurate information pertaining to mechanical condition. Now...
If selling on-line, which Campy Legnano hub set would you buy..?
Dirty and "as found"....
or all shined (machiine or hand polished) up and guaranteed mechanical sound..?
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#14
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,181 Times
in
1,183 Posts
Best, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
#15
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,807
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2439 Post(s)
Liked 3,128 Times
in
1,967 Posts
#16
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I see a lot of grungy chainrings and freewheels for sale here, when surprisingly few minutes with a toothbrush and mineral spirits would take that all right off.
Not that I, like @SurferRosa, mind when I'm the one buying.
Not that I, like @SurferRosa, mind when I'm the one buying.
Likes For ThermionicScott: